5 ms·
Is it easy to install your own RAM in MacBooks these days? I used to do it all the time 20 years ago and I know times have changed.
by hammock 6y ago
Is it easy to install your own RAM in MacBooks these days? I used to do it all the time 20 years ago and I know times have changed.
- Matthias247 6y agoimpossible. It's soldered on the mainboard.
- Scoundreller 6y agoNever say never, sometimes someone with a hot-air workstation could swap chips for denser ones. Never an easy job.
- tylerhou 6y agoA lot of Apple hardware is locked down nowadays via hardware identifiers and the T2 security chip; it’s likely the RAM modules are not replaceable by the user even if you had the skill to solder a BGA.
- Matthias247 6y agoSure. But I don't consider this be a "user installing their own RAM". That's more of a professional doing a delicate operation.
- StillBored 6y agoNormal DIMM's have a SPD flash chip soldered to the board which identifies the ram/timing parameters for the firmware/OS. At least on phones, to save a penny they forgo this and frequently the RAM capacity is tied to the model via hardcoded tables in the firmware. It wouldn't surprise me if at least on some of these "laptop" devices with soldered on ram something similar isn't being done. So, at a minimum your flashing new ram parms to a SPD, or hacking the device model number somewhere. AKA, even with a rework station its likely a lot more than just swapping the chips, if there is sufficient PC/etc linage you might be able to swap the SPD chip as well, otherwise its going to be more than a mechanical heat it up, clean the pads, and drop/heat the new chip.
- wil421 6y agoThe RAM has been soldered onto the logic boards for quite a while now. Probably approaching 10 years for the first models without removable RAM.
- barkingcat 6y agono Ram or Storage upgrades on Macbooks for many years now.