4 ms·

I'm not going to try to remove the screen, I'm sorry. I don't mind turning screws, but I'm not going to mess with glass and glue and stuff. I'm clumsy and afr

I'm not going to try to remove the screen, I'm sorry. I don't mind turning screws, but I'm not going to mess with glass and glue and stuff. I'm clumsy and afraid I'll break something just by looking at it wrong. Especially on something that isn't mine.

lonelappde 7y ago
Screws are much more delicate than glass. Screws strip very easily, making it impossible to remove the connection.
- throwanem 7y ago
  Philips heads strip unusually easily because the driver will fit, but then cam out damaging the drive, if you use the wrong driver size or too little pressure. Or if it's actually a JIS or Pozidriv, and you're using a Philips driver because you don't know better, or the proper sets are expensive, or the size and type you need is in the same place all your 10mm sockets are. Most other drives don't have most of these problems. Even with the infamous Pentalobe, as long as you get the size right, it's pretty hard to screw up.
  - saagarjha 7y ago
    Philips heads camming out is a feature in certain contexts, apparently.
    - throwanem 7y ago
      So I gather, and after all it is by design, but after a lifetime of dealing with the miserable things I've come to regard the design as either obsolete or just bad from the start. edit: Apocryphally by design, anyway. Wikipedia says that's an urban legend, unfounded. I cordially despise the things either way, and I'm sure the sentiment is reciprocated.
      - imtringued 7y ago
        They are bad by design. You can just limit the torque on your cordless drill.
djrogers 7y ago
It’s not glue - the glass is actually held on by magnets around the perimeter. At least my iMac was...
slhlk3h5klh 7y ago
There's no glue - it's held on by magnets. Honestly, it's really easy! Just check here: https://youtu.be/pU2JT6NGNOQ?t=11 https://youtu.be/pU2JT6NGNOQ?t=11
- _ph_ 7y ago
  With newer models, Apple has replaced the magnets with glue.

lonelappde 7y ago

Screws are much more delicate than glass. Screws strip very easily, making it impossible to remove the connection.

throwanem 7y ago
Philips heads strip unusually easily because the driver will fit, but then cam out damaging the drive, if you use the wrong driver size or too little pressure. Or if it's actually a JIS or Pozidriv, and you're using a Philips driver because you don't know better, or the proper sets are expensive, or the size and type you need is in the same place all your 10mm sockets are. Most other drives don't have most of these problems. Even with the infamous Pentalobe, as long as you get the size right, it's pretty hard to screw up.
- saagarjha 7y ago
  Philips heads camming out is a feature in certain contexts, apparently.
  - throwanem 7y ago
    So I gather, and after all it is by design, but after a lifetime of dealing with the miserable things I've come to regard the design as either obsolete or just bad from the start. edit: Apocryphally by design, anyway. Wikipedia says that's an urban legend, unfounded. I cordially despise the things either way, and I'm sure the sentiment is reciprocated.
    - imtringued 7y ago
      They are bad by design. You can just limit the torque on your cordless drill.

djrogers 7y ago

It’s not glue - the glass is actually held on by magnets around the perimeter. At least my iMac was...

slhlk3h5klh 7y ago

There's no glue - it's held on by magnets. Honestly, it's really easy! Just check here: https://youtu.be/pU2JT6NGNOQ?t=11 https://youtu.be/pU2JT6NGNOQ?t=11

_ph_ 7y ago
With newer models, Apple has replaced the magnets with glue.