6 ms·
What will Midi 2.0 mean for musicians? I suspect: frustrations with shit not working with other shit, like it used to with MIDI, and a big decrement in DIY hac
by kazinator 7y ago
What will Midi 2.0 mean for musicians?
I suspect: frustrations with shit not working with other shit, like it used to with MIDI, and a big decrement in DIY hackability.
USB is in the mix! Pretty much `nuff said, but I will say it anyway. USB is a complex beast with documentation that is a good fraction of a foot high, if printed out in all its versions on standard letter sized laser paper. If you bring that into any standard, that is now part of your standard.
USB connectors do not have the optical isolation of MIDI current loops; USB interconnecting will bring in noisy ground loops that will have musicians and recording engineers pulling out their hair.
The clever thing in MIDI is that a device which sends messages over MIDI to another device drives current pulses (not voltage). These current pulses activate an octo-coupling device in the receiver such as a phototransistor. There is no galvanic connection between the devices; they don't share any ground or anything.
All sorts of talented musicians have done incredible things with MIDI. The resolution of MIDI has been just fine for people with real chops. MIDI 2.0 isn't going to solve the real problem: talent vacuum.
- Polylactic_acid 7y agoUSB midi is already a thing though. And its a real pain to use if you want to connect 2 devices together where one of them isn't your computer.
- ipsum2 7y agoFrom the article: > When you connect devices together, the Capability Inquiry will immediately determine what each instrument is able to do: Your new MIDI 2.0 controller will automatically know which pieces of your rig are equipped with MIDI 1.0, which are capable of 2.0, and tailor its messages accordingly. So hopefully backward compatibility Just WorksTM.
- exabrial 7y agoMiDI 2.0 is not isolated? Crap. Literally any of my guitar pedals when connected by USB instantly injects noise into my electric guitar signal chain, and isolated USB hubs are practically non-existent.
- magicalhippo 7y agoSo buy a cheap USB isolator ala https://www.aliexpress.com/item/32965730354.html https://www.aliexpress.com/item/32965730354.html ? Or do you need High Speed (480Mbps)?
- lightedman 7y agoThe isolator most likely won't help. Odds are the pickups on the guitar are picking up the extra noise from the pedal, thus it will always pass the noise along the entirety of the chain, isolated hub or not.
- justinjlynn 7y agoI have no idea why we don't have ADCs at each instrument (if required, otherwise just send the digital output) and DACs at the speakers/amps only with a fully digital mixing and distribution chain/network... it seems silly to be stuck on analogue audio distribution and mixing networks where these things are still problems.
- exabrial 7y agoI'm sorry people are downvoting you without explanation... I used to think the same thing myself until I actually got into music and the engineering behind why things work. The reason why we don't do that is acoustic and electrical coupling. Sound is AC, and because it is alternating we have to deal with impedance matching. air to physical objects actually has a poor impedance mismatch because of the difference in density. Electrically with pickups, when one system has a poor impedance match to another system some really interesting effects can occur. When you overload a downstream device sometimes you can produce interesting interference that just happens to produce harmonics that are musically pleasing to the ear (3rds, 4ths, 5ths). Electrical guitar amps are a great example of this; you can actually design a tube amplifier to produce even or odd order harmonics by the electrical structure of the amp. It's the "less than perfect" analog devices and their complex interactions that make what musicians to refer to as "tone". Fortunately there is actually an alternative: it's called balanced transmission. The standard for audio is unbalanced unfortunately. But essentially you get the best of both worlds: noise rejection from third-party sources yet analog transmission and coupling. Ironically most digital transmissions eventually travel over an analog balance transmission.
- Exmoor 7y ago> All sorts of talented musicians have done incredible things with MIDI. The resolution of MIDI has been just fine for people with real chops. MIDI 2.0 isn't going to solve the real problem: talent vacuum. I find it difficult to believe that someone with even a passing knowledge what MIDI does would have this opinion. Most of the variables are only 7 bits of resolution which produces jarring jumps when you try to adjust parameters in real time. I remember taking a college class 20 years ago where we talked about the deficiencies of MIDI and what MIDI 2.0 should look like. It's been 20 years since that conversation and it's mind boggling to me that MIDI is only getting updated now.
- colanderman 7y agoNote that more bits don't eliminate jumps on their own. You need to also send changes at a higher rate to take advantage of those bits, which in turn translates to the need for higher speed encoders, more processing time spent dealing with the data, etc. A different way to eliminate jumps is simply to low-pass filter the values on the receiver, and read out values from the filter at whatever rate your synthesizer engine can handle. The precision of most controls does not matter that much; you just want to eliminate zipper noise, and this does that. (Of course there are some controls which need the extra resolution. Filter cutoff comes to mind… even 10 bits I've found limiting. Strangely, even though MIDI 1.1 specifies some 14-bit CCs, filter cutoff is not one of these.)
- derefr 7y ago> Note that more bits don't eliminate jumps on their own. You need to also send changes at a higher rate to take advantage of those bits, which in turn translates to the need for higher speed encoders, more processing time spent dealing with the data, etc. That presumes a continuous information stream being sampled. But the sample-depth problem affects discrete notes, too—it's pretty easy to notice how coarse-grained the quiet end of variation is on a MIDI keyboard or drum controller's attack pulse.
- kstrauser 7y agoAlso, MIDI has the nice, round speed of 31,250 bps. Since it uses start and stop bits, that's 3,125 bytes per second. A "note on" message to start playing a note is three bytes long: a 4 bit "this is a note on" field, followed by a 4 bit MIDI channel number, then an 8 bit note number, then an 8 bit velocity ("how hard I hit the key") number. "Note off" messages, sent when you want to stop playing a note, is identical except for the first 4 bit status field. So, if everything's perfect, playing and releasing one single note will take 6 bytes out of the available 3,125 available each second, or 1.92ms. That's why a lot of so-called "black MIDI" songs are probably literally unplayable through an actual hardware MIDI interface. But forget about playing and releasing notes. Say you're triggering a MIDI drum machine and a synth. Sounds like violins have a slow "attack" - that is, you don't go instantly from "no sound" to "full sound", but ramp up over a short interval. Imagine a violinist that has to start moving their bow, or a trumpeter that has to start blowing. It doesn't matter if you send a synthesizer a set of "note on" messages saying "play a middle C major chord" for violin sounds and they don't all get there simultaneously, because it was going to take them all a little bit to start playing anyway. Drums are a different story. If you expect a kick and hi-hat to play at exactly the same time, you don't have that many milliseconds between their starts before a normal human listener can start to really notice it. So, the worst case scenario is that you'd have a piece of sequenced music that plays two drums, a piano chord, a bass line, and a violin chord at the same time. This is were sound engineers start getting hyper nitpicky about stringing the equipment together so that: - The two drums fire off in adjacent time slices so that they sound as simultaneous as possible. - The piano notes come next, from lowest (because if it's a sampled sound, low notes will be played back more slowly and therefore have a slower attack) to highest. - The bass sound comes next because those don't usually have a super aggressive attack. - Violins come last, and it doesn't really matter because they're lazy and they'll take a few hundred milliseconds to really kick in anyway. The worst case scenario is: - One drum fires off. - The rest of the instruments fire off in reverse order of their attacks, like high piano, bass, high violin; medium piano, medium violin; low piano, low violin. - The other drum fires off. Because MIDI is so glacially slow compared to every other protocol commonly used, it's going to sound absolutely terrible. MIDI is amazing in so many way, but it has some very severe technical limitations by modern standards. I can't believe it's taken this long for a replacement to come along.
- derefr 7y ago> USB connectors do not have the optical isolation of MIDI current loops; USB interconnecting will bring in noisy ground loops that will have musicians and recording engineers pulling out their hair. Isn't MIDI... digital? What do ground loops matter as long as the signal decodes? Or do you mean that they'll put current into the analogue signal chain? IMHO, the correct response to that is to do all hybrid analogue+digital signal processing in the digital domain with opto-isolated pre-amp ADCs, no?
- kazinator 7y agoMIDI connects all sorts of gear, a lot of which contains analog signal paths. That's why its design is the way it is. For instance, rack-mounted synthesizer with analog outputs going to a PA.
- drderidder 7y agoIt matters a bunch. All kinds of noise can get picked up over cables and bleed into your audio path on a digital rig. It happens all the time just with power cables which is why every musician carries a handful of "ground lifts" even though they're technically illegal in a lot of places. That said, MIDI over USB is kind of necessary in this day and age. Hopefully instrument manufacturers will be rigorous about isolating any interference it could pick up.
- pjc50 7y agoGround loops can end up with a surprising amount of current. They're also very good at emitting hum into other nearby devices.
- noizejoy 7y ago> All sorts of talented musicians have done incredible things with MIDI. The resolution of MIDI has been just fine for people with real chops. MIDI 2.0 isn't going to solve the real problem: talent vacuum. Wouldn't basic economics suggest that talent vacuum would lead to most talented musicians making good money? -- And I'd argue the opposite is the case - there's a lot more musical talent than the world "needs" (and thus is willing to pay for). Therefore most musicians are poor (and many with additional talents stop being musicians). -- Or did you mean the "talent vacuum" in a different way?
- pjc50 7y ago"Getting paid in the music industry" and "having your music respected by other musicians" are two thinly-related different things.
- spookthesunset 7y ago> The clever thing in MIDI is that a device which sends messages over MIDI to another device drives current pulses (not voltage). These current pulses activate an octo-coupling device in the receiver such as a phototransistor. There is no galvanic connection between the devices; they don't share any ground or anything. I don’t understand why this matters at all. The engineers who made 1.0 had different sets of constraints that we no longer have. Now days we shove gigabits a second over cheap twisted pair wire. MIDI could do a lot more on modern or even decade old hardware...
- smilekzs 7y agoEthernet is isolated (transformer-coupled). USB in its most common form has shared ground.
- kazinator 7y ago> Now days we shove gigabits a second over cheap twisted pair wire. Yes, and when you listen to your PC's "line out", you can hear the unwanted effects of all that sort of thing.
- shawnz 7y agoCan't confirm, my newest motherboard's "line out" has actually been one of the best audio devices I've used in a while. And it's just a budget board.
- freepor 7y ago> All sorts of talented musicians have done incredible things with MIDI. I mean Beethoven did some incredible shit without even MIDI 1.0, I’m not sure that’s a sensible line of reasoning.
- IshKebab 7y agoDo you think we should just stick with limited protocols from the 80s? There's no reason you couldn't make an optically isolated USB hub. With USB 2 it would be trivial. USB 3 is harder but I doubt you need that for MIDI.
- vonseel 7y agoUSB interconnecting will bring in noisy ground loops that will have musicians and recording engineers pulling out their hair. I just switched to a bus-powered USB-C (Arrow) audio interface and have picked up a nasty ground loop/dirty power noise problem in the process. Current setup is a MacBook with the Arrow directly plugged in, and MacBook powered by a second thunderbolt 3 connection to an OWC Tb3 dock, and I am assuming if I power the Mac with its dedicated power supply the noise issue will go away, but if it doesn’t... well, I don’t know what else I could do to fix it. In the past I’ve solved all similar issues by using a powered USB hub between the problem devices and laptop.