4 ms·
I've heard a rumour too that there's a safe in each of their fabs containing enough explosives and instructions on how to scuttle the fab in case of invasion.
by monocasa 7y ago
I've heard a rumour too that there's a safe in each of their fabs containing enough explosives and instructions on how to scuttle the fab in case of invasion.
- adventured 7y agoCertainly if tension with China builds toward some conflict and China were to begin an invasion of Taiwan, and the US came to their aid in some manner (limited to maintain face or otherwise (the US will not go to direct war with China at scale under any scenario short of survival-necessity)), the first thing the US should/will consider doing is accidentally bombing Taiwan's advanced manufacturing and technology structures (including any TSMC fabs). Then blame as much of the destruction as possible on China. Any invasion of Taiwan by China is a guaranteed loss of Taiwan permanently to the CPC and almost everyone in Washington DC knows that. So if you're going to suffer a guaranteed loss, they'll take a serious look at 'reasonable' scorched earth; make it more painful (China and the USSR several times used that in the direction of US global ambitions post WW2; the US would do the same thing the other way and has eg in Afghanistan-USSR and elsewhere, so I have no doubt they'd consider it for a Taiwan scenario). It's not a nice thing to say or ponder, it's exactly how the Pentagon will think about this matter however.
- bob1029 7y agoThis would not surprise me, especially considering just how little you would need to catastrophically disable one of these factories. That said, I don't think this is a very practicable angle to worry about, since it's not just the factory you need to make the products. It's also the people, experience, and massive logistical octopus the factory is hooked into that makes it able to produce these incredibly valuable products. One minor deviation in a supply chain (i.e. a vendor switch) can mean millions of dollars in scrapped wafers. Just having the factory and its tools doesn't mean anything for an invader. It would simply become the most expensive waste of space on the planet.
- hinkley 7y agoThese days, how much damage could you do to a fab with just a bag of talc or ash and a blasting cap?
- spectramax 7y agoNot much actually (I've worked in a fab), the entire floor is porous to allow air through it and fab HVAC systems attempt to create laminar flow from top to bottom [1]. [1] [Photo] https://www.entegris.com/content/dam/web/pure/rare-air/FAB4SKETCH_Rd7.jpg https://www.entegris.com/content/dam/web/pure/rare-air/FAB4S...
- hinkley 7y agoThat is seriously cool. Does that reduce the need for protective equipment to keep dander and dust from getting everywhere or is this strictly in addition? My sense of how destructive dust can be in these facilities may be inflated. I'd heard that re-establishing a clean room can be a huge PITA and the first thing I could think of was powders getting in there. If you're ordering your people to destroy equipment, you could turn off the air handlers first, right? You're not gonna be in there long enough for the CO2 to build up to harmful levels. Unfortunately I don't recognize most of those acronyms. Are they dealing with fumes as well?
- spectramax 7y agoNo, its in addition. There are micro-clean environments inside the tools themselves. The wafer chamber is a couple of orders of magnitude clean. The plastic box that carries 15-20 wafers has to be specially made for cleanliness, each piece costing thousands of dollars. Entegris makes these boxes too [1]. [1] https://www.entegris.com/shop/en/USD/Products/Wafer-Handling/Wafer-Processing/300-mm-Front-Opening-Unified-Pods-%28FOUPs%29/c/300mmfrontopeningunifiedpodsfoups https://www.entegris.com/shop/en/USD/Products/Wafer-Handling...
- bob1029 7y agoIt honestly depends on where in the fab. One of the most dangerous things from a chemical perspective would be copper in the non-copper part of the factory. If you set off something jacketed with copper right in the middle of the photolithography tool area, it would probably be game over for quite some time.
- tgsovlerkhgsel 7y agoThe claim I heard was similar, except that instead of "in a safe" it was "embedded in the walls".
- gmueckl 7y agoThat would be far too dangerous as this makes future construction work on a building extremely risky. I don't believe that for a second. I would not be surprised of there's a plan for the sabotage of infrastructure or valuable facilities in general. In a similar vein, German roads and bridges had shafts in them for explosive charges. The plan was to blow them up in case of a Warsaw Pact invasion to slow any enemy advance.
- tgsovlerkhgsel 7y agoModern explosives are reasonably safe without a detonator. Most bridges in Europe had/have those shafts. The Swiss removed the explosive charges from some bridges in 2014 [1]. It's perfectly possible that the TSMC "explosives in walls" thing is an urban legend, but I don't think it'd be impractical. [1] https://www.thelocal.ch/20150113/tons-of-tnt-finally-removed-from-swiss-sites https://www.thelocal.ch/20150113/tons-of-tnt-finally-removed...