3 ms·
And the Western approach is to replace the board that’s faulty rather than the part or two that causes 99% of the failures of that board. We could only pray th
by Scoundreller 7y ago
And the Western approach is to replace the board that’s faulty rather than the part or two that causes 99% of the failures of that board.
We could only pray that the western repair shop sends the board somewhere for refurbishment.
- WrtCdEvrydy 7y agoIt's a labor cost. As hardware becomes more all-in-one, your cost of labor for knowledge of desoldering a single piece becomes more and more. Noone wants 'repaired goods' in the US.
- Scoundreller 7y agoSort of. I feel like it’s a technical education thing. The fellow in Shenzhen is probably getting paid hundreds of dollars per month. (Just a guess, I know SZ is expensive, but has lots of labour coming from outer lying areas). Even if it cost 10x labour for the procedure of turning a 16gb iPhone into a 128gb, it would be worth it. But I don’t think you could train the average Western worker to become a BGA solder worker and reflasher and have them work for you for more than 6 months before racing to a higher paying job.
- ClumsyPilot 7y agoThat's tragic, ignorance costs a lot more than education in the long run
- penagwin 7y agoThis. I worked at a small cell phone repair store. We could replace lots of parts in say an iPhone 7, but nearly no soldering. Parts are relatively cheap (lcd might be 35$ for the 7 when I was there) - and we were only paid up to 12/14$ an hour (that's nearing McDonald's level). There is little proper education for something like BGA soldering, and if there is then you're more likely to get a job as an engineer.