4 ms·
> about the possible liquefaction of the relatively new solid bulk cargo bauxite (an aluminium ore). Is bauxite really new cargo? Or do they mean ship-operator
by Scoundreller 7y ago
> about the possible liquefaction of the relatively new solid bulk cargo bauxite (an aluminium ore).
Is bauxite really new cargo? Or do they mean ship-operators need to be careful when switching to bauxite cargo?
And any particular reason for loading these cargoes with water? Why not dry?
- jacobush 7y agoI think this is the lead: "The International Maritime Organisation has codes governing how much moisture is allowed in solid bulk cargo in order to prevent liquefaction. So why does it still happen? The technical answer is that the existing guidance on stowing and shipping solid bulk cargoes is too simplistic."
- Brian_K_White 7y agoAt a guess, it's probably easier to pump slurry than to shovel dry material. Maybe also dust.
- raws 7y agoSounds like they may want to remove water out of the cargo for transport and pump it back in for unloading
- nicthesailor 7y agoYes for the first part, but we definitely don't want to pump it back in for discharge. Dry bulk cargo is almost always discharged with grabs and cranes, not pumps.
- scoot 7y ago”[...] if, as is common practice, the cargo is loaded with a conveyor belt from the quayside into the hold.” So, no.
- jmts 7y agoIs bauxite really new cargo? Or do they mean ship-operators need to be careful when switching to bauxite cargo? My read on it was that bauxite was new as a solid bulk cargo, not that bauxite itself was a new cargo in general. I know nothing of the industry however, so I'm not sure whether this is a legitimate interpretation or not.
- jschwartzi 7y agoAt a guess, they have to do the loading, hauling, and dumping outside in all weather and also probably barge it out to the hauler in some cases. All of these things can add a significant amount of water to an otherwise "dry" solid.
- nicthesailor 7y agoSeafarer here. This is basically correct, but the problem is mainly storage before loading. Ideally, is mined, then either stored somewhere dry, out of the weather, or delivered directly to the ship in a covered train/conveyor belt. In reality, it's usually mined, then stored in a big pile outside in the weather for weeks/months until it's loaded. It won't pass the pre-loading transportable moisture limit (TML) tests, so they falsify the results. A cargo with a slightly high TML can appear dry on loading, but the vibration causes the moisture to migrate down to the bottom of the hold and cause the cargo at the bottom to liquify. When the ship rolls, this layer shifts, and the rest with it. Obviously, if the TML is way too high, the whole thing turns to slurry.
- russfink 7y agoCan they just pump the water out?
- nicthesailor 7y agoTo pump out, we need it to settle out of the cargo so that we can get it to the pumps. That works for certain types of cargo (iron ore and most types of coal are easy), but if it forms slurry instead, we can't get it out unless we can somehow pump the slurry out. Normal bilge pumps can't cope with slurry.
- deleted 7y ago[deleted]