6 ms·
> The metal would have various industrial applications and make nice jewelry and dental fillings, but it wouldn’t spark a new industrial revolution, or dramatic
by scotty79 7y ago
> The metal would have various industrial applications and make nice jewelry and dental fillings, but it wouldn’t spark a new industrial revolution, or dramatically bring down the cost of goods and services, or in general make human life much better or more comfortable.
There would be many new industrial aplications for gold alloys. I think abundance of gold could spark mini industrial revolution.
- noir_lord 7y agoIt would replace a lot of copper in electronics, gold has lots of nice properties for that application (it's used already for chip pins and in some space/avionics systems) except it's price precludes mass production use. It's also inert, non-toxic and easily recycled - it'd be useful just for that.
- deleted 7y ago[deleted]
- cogman10 7y agoNah, copper is used for electronics because it has a lower resistivity than gold. It is just as easily recycled, we just don't do it because it is cheap. They gold plate leads because gold doesn't corrode. https://en.wikipedia.org/wiki/Electrical_resistivity_and_conductivity https://en.wikipedia.org/wiki/Electrical_resistivity_and_con... It doesn't matter much in the long run, but just want to squash out the notion that gold is a better electrical conductor. It isn't. In fact, where weight matters, aluminum is often preferred over copper. While copper is more conductive, aluminum has a high conductivity:weight ratio (that is, you use a bigger wire, which can conduct more and weighs less than the same resistance on a copper wire). Gold is the worst of both worlds. It is heavier than copper and only slightly better at conductivity than aluminum.
- Scoundreller 7y agoAs a resident of the salt belt, automotive electronics that can’t corrode sounds very appealing.
- smolder 7y agoMy thoughts went to corrosion as well. Rust (oxides, not the programming language) has a huge cost associated with it. Abundant gold could conceivably result in building materials that are much longer lasting. Certainly we could gold plate more things.
- klodolph 7y agoIt would be used in addition to copper. Circuit boards are currently made out of copper for various reasons, I don't think you would use gold for PCB traces even if the materials were cheap. With copper you can use ferric chloride and simple photoresist to etch the board, with gold you would need something more powerful like aqua regia. Gold also has some undesirable properties like the various awful gold-aluminum intermetallics that it can form, and it suffers from poor solderability. I think more likely we would see ENIG as a standard / default plating instead of HASL. Traces would continue to be made out of copper or aluminum depending on what you are optimizing for, plated with gold (over a layer of zinc or nickel) to protect them from corrosion, and with various tin/nickel/etc pads for solderability.
- cogman10 7y agoSeems a pretty big assumption. We have an abundance of silicon, that hasn't sparked any sort of revolution around silicon. Gold has some nice properties, but I don't think it is a wonder metal.
- klodolph 7y ago> We have an abundance of silicon, that hasn't sparked any sort of revolution around silicon. ...But it has? Think of all the things we make out of silicon and silicon compounds. Buildings, glass, countertops, tools, computers, etc... If silicon were rarer we would surely not be making buildings and windows out of silicon compounds! Some of these do not have easy replacements. You can make buildings without silicon (many are made without) but without silicon we would have a hard time coming up with something like glass. Glass fueled a lot of our scientific revolutions, giving us glassware for chemistry, optics for microscopes and telescopes, etc. Who can know how long it might have taken for us to discover the theory of gravity, cell theory, germ theory, or large chunks of chemistry without glass.
- perl4ever 7y agoAnother case in point, maybe a better parallel, is aluminum. Once it was more precious than gold and used in similar applications to gold and platinum. Then technology was developed to produce it more easily, and we started making things like wheels and then entire vehicles out of it. So we already have the precedent of a precious metal becoming an industrial one, although I don't mean to suggest gold alloys would be good for the same applications due to its density.
- cogman10 7y agoThe strength to weight ratio of aluminum was known long before we could mass produce it. For example, Titanium is superior to aluminum in most weight/strength applications. If we could mass produce it, we'd not use aluminum anymore. Carbon fiber is even better than Titanium. Again, if it were mass producible, we'd use it for everything. I can point to materials that, if they were cheaper, we'd make everything out of them. That's because we've researched these materials and know that they have potential applications. Their availability hasn't been a factor in the research, not really. Gold, AFAIK, doesn't have those same sorts of analogous usages. It doesn't have a "But if it were cheaper" sort of application. Maybe some electronics or nano-scale applications might benefit from it, but I wouldn't think it would be excluded from that research since you are talking about a tiny amount per component (after all, we still use gold to plate electronic leads today).
- logfromblammo 7y agoHull cladding. Every ocean-going ship on Earth with a corrosion-resistant gold-plated hull. Wires and electronic traces. Low resistivity, highly ductile, and again, high corrosion resistance. Polycarbonate-gold astronaut sunglasses. There is an asteroid-sized pile of potential applications, for which gold is currently ruled out due to the cost of obtaining sufficient quantities, while gold is strictly superior to some other material in all other respects. Subbing in cheaper gold does make us all richer. Most people have no idea how much money is lost every year to corrosion.
- mojomark 7y ago> Hull Cladding Interesting, but after giving it some thought (I actively research steel hull efficiency), doubtful. It's true that gold is highly stable in seawater when not in contact with other metals, however, put it in contact with steal and you have a fairly decent dissimilar metal reaction leading to galvanic corrosion of the hull over time. (1) Gold is very soft, so any impact with common marine debris (logs, scrap, buoys, etc.) may very will penetrate to the steel hull structure, which unless quickly repaired would lead to the above corrosion. In general, hulls are designed to account for 40-50yrs of service life corrosion before needing to be scrapped. However, this comment made me ask the question of whether or not gold is a good antifouling agent to prevent marine growth. After all, we've all seen shiny non-fouled gold being pulled from ancient ship wrecks. I really can't find much data on gold preventing marine growth, but if successful, cost-effective, and non-toxic (as copper is), that would be a major savings in terms of fuel efficiency for ocean-going vessels. 1. https://blog.samtec.com/post/dissimilar-metals-in-mating-connectors https://blog.samtec.com/post/dissimilar-metals-in-mating-con...
- LifeLiverTransp 7y agoWhat if it is only applied one atom thick- as in plated on with a galvanic bath?
- logfromblammo 7y agoI actually thought the steel skin would be covered with in insulator layer, such as paper, fiberglass composite, or plastic sheeting, and the gold bonded to that. Punctures and crushed panels would then be detected by changes in capacitance. And now I'm imagining arcs from improperly grounded inner hulls, so maybe that's not the greatest idea for gold. But if gold resists the barnacle adhesive even a little bit, that's already a major win.
- tantalor 7y ago> could spark mini industrial revolution A literal "golden age" to rival the iron age?