4 ms·
I am finding it astonishing that they could construct them at all, never mind get them to work and not explode. There is a great deal of this in modern life th
by ncmncm 8y ago
I am finding it astonishing that they could construct them at all, never mind get them to work and not explode.
There is a great deal of this in modern life that we successfully ignore until management failure makes it unmaintainable any more.
- enriquto 8y ago> ... and not explode. But it does explode! It's just that the all the explosion power is arranged to go in the same direction
- deflagrate 8y agoUh, well, more to the point, the propellant does not instantaneously go off as a single, entire quantity, expending all potential energy in the blink of an eye. Does a person need to clarify this point, in order to convey intended meaning in this context?
- amelius 8y agoThings explode in a car engine all the time, so it's not really anything special.
- dsfyu404ed 8y agoIt's more of a gradual thwump that progresses through the combustion area than an explosion, unless it's a diesel.
- bumby 8y agoDetonation in a car engine is bad. What's actually happening in a normally operating engine is deflagration. Deflagration = subsonic combustion Detonation = supersonic combustion When people say "explode" they tend to mean detonation.
- gmueckl 8y agoI don't have any data for the F-1, but the typical high power rocket engines of these days had an explosive temperament that needed to be tamed on the test stands. I recall that the SSME had a tendency to self-disassemble vilently on its test stand due to turbo pump failures that took a long time to solve. Other rocket engines probably were very similar in that regard.
- baobrien 8y agoIIRC, the injector plate on the F1 had to go through quite a few iterations to keep the engine from exploding.
- gameswithgo 8y agoand according to a documentary I watched, they never knew WHY it stopped exploding, just that they found a plate that made it not explode anymore. Von Braun: "So what was the problem?" Engineer: "dunno"
- mcguire 8y agoIgnition! by John Clark mentions it, although I don't think he tells that anecdote. Just that they were going to look at fancier designs, but the showerhead (with baffles) worked just fine.
- mannykannot 8y agoThere were serious problems with unstable combustion causing the motor to break up, that were fixed by putting baffles on the injector plate to divide up the volume, where the combustion started, into smaller independent regions [1]. Once it was running smoothly, the engineers were still concerned that it might be on the edge of instability, so they ran some tests in which a small explosive charge was detonated in the combustion chamber of a running motor, to check that it settled down to running smoothly afterwards. [1] http://heroicrelics.org/info/f-1/f-1-injector-baffles.html http://heroicrelics.org/info/f-1/f-1-injector-baffles.html
- ThenAsNow 8y ago
- dsfyu404ed 8y agoAnd they did it in with slide rules and manual machining.
- mcguire 8y agoAnd they explode quite a lot.