3 ms·
For the fridge: you use excess cooling in the freezer to keep the whole thing cool. Or a reservoir of compressed refrigerant. Or phase change materials. The po
by Scoundreller 8y ago
For the fridge: you use excess cooling in the freezer to keep the whole thing cool. Or a reservoir of compressed refrigerant. Or phase change materials.
The point wasn’t to be off for 7 hours, but to look at the current and projected prices and decide when to run at a normal rate or when to kick into overdrive (2C fridge and deep freeze) or when to run at normal rate (maintain 4C and -18C).
For the dryer, depending on electricity price, you run it at a slower or faster rate. Indeed, when I line dry, it can take a while, without the issues you bring up.
If there’s a gust of wind, dial it up. When it’s calm, dial it down. Since wind goes in a direction, we have some idea of when turbines will put out more power that’s cheaper.
Hot water heaters here have thermostatic mixing valves, so as long as we’re not boiling, we have a lot of margin to work with without scalding anyone.
Finally, the nice thing about ice is that water is cheap. It’s already a commercialized tech, just not cheap enough for residential use.... yet.
The point isn’t to use these reservoirs for 100% of needs, but size them up to be fully utilized on a regular basis buying electricity at low prices to offset higher prices.
Sometimes that’s less efficient from a thermodynamic standpoint (the hotter hot water heater does shed more heat), but made up for in reduced op costs.