4 ms·
And shock you or destroy your equipment. A lot of what makes real (UL/ETL listed) chargers expensive is making sure that line voltage stays adequately separate
by amluto 8y ago
And shock you or destroy your equipment. A lot of what makes real (UL/ETL listed) chargers expensive is making sure that line voltage stays adequately separated from the low voltage side.
- Crosseye_Jack 8y agoI would add "In a small space" Making an larger power supply that keeps the high and low sides adequately separated is pretty easy and cheap as long as you stick to genuine components. But that then leads onto the whole fake component issue. For example the component will be a optocoupler but the dirt cheap knock off supply may not be using the same level of quality or a knock off component as those found in genuine power supplies which _could_ create a High to Low voltage path if that part failed.
- Dylan16807 8y ago> A lot of what makes real (UL/ETL listed) chargers expensive is making sure that line voltage stays adequately separated from the low voltage side. Even a very cheap and simplified design can do that. I wouldn't say "a lot" at all, maybe a few percent of the cost at most. It's a corner that could possibly be cut, but it's not one of the bigger corners.
- taivare 8y agoThis summer I, had a dehumidifier plugged in with a 3-prong connector . . good thing I, checked it shortly after I started the unit ,the adapter was very/warm . . a short in a cheap adapter . . went to electric supply store and made sure I got a high quality UL rated brand.
- kens 8y agoI've done a lot of charger teardowns, and very cheap chargers always violate UL safety rules. It's a combination of cost (e.g. triple-insulated transformers), it's hard to fit clearance distances into a small charger, sloppy manufacturing, and they don't seem to even try.
- microtherion 8y agoI respect your superior expertise, of course, but looking through another site that has done systematic teardowns and measurements (https://lygte-info.dk/info/ChargerIndex%20UK.html https://lygte-info.dk/info/ChargerIndex%20UK.html), it appears to me that this might be too categorical a statement. While counterfeit chargers almost always seem to be dangerous, there seem to be some Chinese brands which produce quite respectable chargers, while still being fairly inexpensive.
- jdietrich 8y agoThe point is that you don't know. A legitimate branded charger will have been tested in a certified test lab, while an off-brand or counterfeit charge is likely to have a counterfeit UL mark. It might be perfectly safe or it might be a complete deathtrap, because nobody has actually tested it for compliance.
- joshu 8y agoI need a bunch of chargers for a sensor network (Right now using Wemos D1 Mini boards). Any advice on optimizing for price without compromising on safety? I don't trust the sellers that sell $2 chargers...
- jdietrich 8y agoAnker, Aukey and Blitzwolf make reasonably priced and high quality chargers.