14 ms·
I don't understand this type of audiophiles. I also have a fairly high end, vintage audio system at home, but I'd never do anything like that in the name of aud
by bayindirh 8y ago
I don't understand this type of audiophiles. I also have a fairly high end, vintage audio system at home, but I'd never do anything like that in the name of audio quality. There's a quote I love about these people:
A normal person uses the audio system to listen music, while an audiophile uses music to listen to his audio system.
- PappaPatat 8y agoTotal personal anecdote: Yeah that basically describes me, between the ages of 16 and 26. We would spend hours moving gear to different locations (homes), fiddling with cables, different amplifiers and loudspeaker to find the best possible match our (limited) finances would allow. Tube amplifiers combined with mosfet pre's, magnapans with external bass speakers. Class A amplifiers that would require a dedicated powerfuse per amplifier. First press vinyl from Japan. Van-den-Hul needles. Granite turntable platform. Every single weekend we'd swap pre amps, amps, turntables, arms, elements, needles and listen to the "audio system via music" :) What happened to my setup, you ask? I got married. My living room was modelled around the audio experience: it was not an ideal love nest :) I actually gave my hand crafted, tailor made end amplifiers away just a year ago to a young stranger I overheard talking about his audio quest and who is in the phase where he is searching for his ideal setup like I was 30 years ago.
- seandougall 8y agoThat's a very apt quote. The way I look at things like this is: Do recording studios go to the same lengths? After all, if the effect is real, and the studio didn't do something to mitigate it, then it's going to be on the track regardless of what you do in playback at home. Much more so, even, because of the gain stages involved when recording a microphone signal. (Spoiler alert: Recording studios do not install their own power poles. What they do, though, is install isolated ground circuits.)
- retrogradeorbit 8y agoIndeed they do. Some high end studios install balanced power. Which is more involved than just a power pole.
- justtopost 8y agoMost larger studios have a huge isolation trasformer for the whole set of studio circuits, and then smaller local filters like furmans. Balanced wiring as noted, also occasionally makes an appearance, but is less common. I run a dedicated ground. I personally use 3 transformers, and 3 filters (one capacitance, 2 mot). Not all in series mind you, but digital and analog gear are on seperate circuits, and a 3rd for hybrid designs (yay 80s synths). Analog recoding is sensitive to power in a huge way, but listening is seldom as affected. Note all studios use balanced audio, while most 'audiophile' crap is still unbalanced.
- walrus01 8y agoOne of the things I truly will never understand about "Audiophiles" is their willingness to spend money on products that are, from a technical basis, indisputably categorized as snake oil. For instance: https://www.amazon.com/AudioQuest-Diamond-feet-Braided-Cable/dp/B003CT08E4 https://www.amazon.com/AudioQuest-Diamond-feet-Braided-Cable... It's an HDMI cable! The video signal has CRC in it and is packetized, it's either going to make it or it isn't. The quality of video delivered at, for instance, 2160p 60fps 10bit color to an expensive 80" 4K TV is going to be literally indistinguishable from the same video delivered by a $16 Amazon house brand HDMI cable. Or this, it's a $340 cable for 1000BaseT Ethernet: https://arstechnica.com/gadgets/2015/07/gallery-we-tear-apart-a-340-audiophile-ethernet-cable-and-look-inside/ https://arstechnica.com/gadgets/2015/07/gallery-we-tear-apar... People actually make the claim that their FLAC "sounds warmer" when transferred through this. How, exactly? That's not enough? How about the $10,0000 1000BaseT Ethernet cable? https://arstechnica.com/staff/2015/02/to-the-audiophile-this-10000-ethernet-cable-apparently-makes-sense/ https://arstechnica.com/staff/2015/02/to-the-audiophile-this... I can sort of understand methodology and expensive equipment modifications to separate AC power from amplifiers, and shield AC power lines and such, keep AC power runs away from speaker wires, etc. That has at least some basis in technological reality.
- snovv_crash 8y agoOne theory I read (for good quality USB cables to a DAC) is that reduced packet loss reduces jitter, which means that the clock rate of the DAC doesn't have to adjust in order to keep the buffer populated, but not overflowing. Sounds plausible, but I'm not sure that packet loss is high enough to actually cause this.
- AdrianB1 8y agoA working USB cable does not create packet loss and definitely does not fix packet loss; if packet loss occurs because of the cable, the cable is defective, nothing else. There is no good quality and bad quality, there are cables that work as expected and cables that are defective.
- 8y ago
- AdrianB1 8y agoYou don't understand the power of naivety, placebo effect, dreams and stupidity composed (multiply all). Not in any way intended to insult these people, I know a few (not as rich) and they simply do not want to understand the basic principles behind digital signals, error corrections etc. I know people that work in IT and still pretend that audio transmission over USB can add jitter to music and that a DAC can "open" or "close" "the stage" by low quality processing of the signal. There is no way to convince these people they are wrong, so I stopped trying many years ago.
- sigi45 8y agoWhatever your basic statement was, it's proven valid. Tremendous how much you can discuss it in such a wide small area. AD, wine, Jitter ... :-)
- fabioborellini 8y agoWhat kind of arguments you've been using? Are you talking specifically about the DA chips or the black boxes containing them? I pretty much can agree with you regarding the digital side of things, but could the actual appliances have notable differences in their analogue side or configuration? Maybe the actual value of having a $400 DAC appliance (built around a $2 Wolfson DAC chip) is going around problems in a computer's noisy or badly pre-amplified integrated audio output. I don't mean to question your expertise on the subject, I'm just after an explanation what are the exact reasons why the setups with separate DAC and amp boxes have made me find new musical instruments on my audio files. And of course it would be nice to know if there is an inexpensive way of getting the analogue signal to a good amplifier without somehow ruining it.
- deleted 8y ago[deleted]
- golergka 8y agoI used to obsess over the sound quality before. But when I grew as a musician, I started to care less about the frequency balance, dynamic range and started to care more about the emotional content. Now I listen to music on the cheap and convenient bluetooth headphones, going through dozens new songs every day (in crappy streaming quality), and instead of tweaking Ozone settings, use LANDR for mastering and use this time to work on lyrics instead. Sound quality is not music quality.
- black-tea 8y agoThey are just people with a lot of money who spend it on things they like. What more is there to understand?