5 ms·
> Same with audio on machines, that constant beep is annoying to you, but it means the machines are operating and you are getting your prescribed fluids - silen
by amluto 8y ago
> Same with audio on machines, that constant beep is annoying to you, but it means the machines are operating and you are getting your prescribed fluids - silence on a night ward is a sign something is wrong, and quickly precedes an emergency alarm.
Sure, if there is one source of beeps, then no beeps would be conspicuous, but when there are many things all beeping, having one of them stop beeping may not be so obvious at all.
A simple technological solution seems appropriate here. Have each machine that needs to work check in every couple seconds with each of two centralized monitoring machines. Have each monitoring machine alert the nurse desk if a monitored machine stops checking in. This is silent and has no single point of failure.
- mathrawka 8y agoThe nurse desk is a SPoF. If something goes wrong with that area, then how can you tell each monitoring machine is working?
- NegativeLatency 8y agoFailover to beeps?
- amluto 8y agoThe nurse desk is a desk. If the desk literally fails, you have serious issues, and your average multiple person desk is well enough engineered that there isn’t a single piece that can fail and take out the entire desk. But there are generally multiple nurses at the nurse desk, and there are often multiple desks, too. Also, you could hook the monitoring system up to the PA system. edit: when I say hooking it to the PA system, I mean that, if no one acknowledges the light or computer message or whatever, then an announcement could play after a set delay.
- ascar 8y agoNetwork failure in the desk room sounds like a complete outage for that.
- woolvalley 8y agoHow do you know if each machine is reporting in a consistent manner without being there 24/7 and making sure they beep all the time vs %40 of the time?
- ajmurmann 8y agoTo me the beeping also seemed like a quality backwards solution where much better, seemingly obvious solutions exist. Reality is probably much more complicated though. In a solution like you described and I had in my head we'd need a agreed upon protocol between IV drip and monitoring device. Probably the same standard should be used by other, similar devices. If that doesn't happen we get vendor lock in. In addition we are taking about medical devices so everything has to be fool proof, audited, double checked and certified. So what might be cheap in a consumer device now probably made the IV drip an order of magnitude more expensive. That is, if we agreed on a protocol in the first place.
- abecedarius 8y agoI’m sure you’re right, but being unable to sleep when you need to heal is bad. "It’s complicated" is not a get-out-of-jail-free card.
- m_mueller 8y agoMay I weigh in with an outside perspective? My impression is this is a cultural issue, i.e. Americans are very insensitive to noisy disturbances during sleep hours. Biggest examples for me are your freight trains. Deadly accidents? Sure, the only solution is to disturb sveryone in a 5 mile radius around each crossing. In my home country this is unthinkable. People get chewed up, sometimes called the police on, for even running the washing machine past 10pm.
- sunkencity 8y agoabsence of signal is not a good indicator of operation. it is the same signal as total failure of your system.
- dingaling 8y agoInterestingly that reflects Airbus vs Boeing cockpit philosophies. In the early 1980s Airbus adopted Dark Cockpit where the default state of all annunciator lights is off. If one illuminates then it indicates something worthy of attention. The colour of illumination indicates functional state; blue is good, amber is malfunctional.
- andai 8y agoWhen would something illuminated blue? When it's both working smoothly and worthy of attention?
- jon-wood 8y agoI assume that's for indicators of abnormal, but safe, state. One example could be the undercarriage being down, a situation that would usually not be expected, but when you're in the process of landing doesn't warrant attracting your attention as an error state.
- michaelt 8y agoAccording to [1] for the wing anti-ice system, Blue = Turned on, Unlit = Turned off, Amber = Malfunction Of course, one might very well argue that 'turned on' is not 'worthy of attention' [1] http://www.smartcockpit.com/docs/A330-A340_Overhead_Pushbuttons_1.pdf http://www.smartcockpit.com/docs/A330-A340_Overhead_Pushbutt...
- Scoundreller 8y agoCentral monitors are quite common. There are even entire units based on it (telemetry).