4 ms·
Does the refrigerator still need helium? Getting rid of helium might be a bigger deal than just raising the temperature. Edit: Thanks for the comments. Adding
by analog31 8y ago
Does the refrigerator still need helium? Getting rid of helium might be a bigger deal than just raising the temperature.
Edit: Thanks for the comments. Adding a note: As I understand it, in some of these materials, the transition temperature decreases when the material is in a strong magnetic field, so there's a limit to how strong a magnet can be made, and further cooling may be needed to deliver sufficient field for an application. Still, I'm excited, and hoping that the "grail" of helium free refrigeration is achieved soon, due to the tricky issue of world helium supply.
- azernik 8y agoGenerally "high-temperature" means liquid-nitrogen temperatures - in general, 77K is a common lab benchmark for these materials. EDIT: See, for example, this paper on the superconductor in question, which gives properties at 77K and zero magnetic field: https://www.sciencedirect.com/science/article/abs/pii/S0921453497001202 https://www.sciencedirect.com/science/article/abs/pii/S09214...
- Dylan16807 8y agoThey're cooling it to about 30K, at which point nitrogen is frozen solid.
- azernik 8y agoInteresting. That's around the liquid hydrogen range - still cheaper than helium, but probably not as easy to work with as nitrogen. I guess their requirements for critical field were high enough that the 77K GdBaCuO performance wasn't good enough?
- Dylan16807 8y agoGoing by the link stephen_g found, it has around 1.8x the needed capacity at 30K, 1x at 50K, and 0.2x at 77K.
- ginko 8y agoGiven the spectacular ways wind turbines can fail, I'm not sure if I'd like liquid hydrogen to be involved there.
- rbanffy 8y agoIt'd probably evaporate before it reaches the ground
- all2 8y agoPer this: https://aip.scitation.org/doi/abs/10.1063/1.99713 https://aip.scitation.org/doi/abs/10.1063/1.99713 Superconducting transition occurs between 86K to 94K, so liquid nitrogen would be more than sufficient for the task.
- stephen_g 8y agoI found this other document that has some information I think about this project at the end [1], which says it's conduction cooled by the cold heads. So perhaps it doesn't use either LN or liquid helium. 1. https://indico.cern.ch/event/588810/contributions/2477331/attachments/1413568/2163143/WAMHTS-2_THEVA_2017-02-16_final.pdf https://indico.cern.ch/event/588810/contributions/2477331/at...
- azernik 8y agoStill need a refrigerant in your cryocooler to have a cold head. See my comment above - at those temps, probably liquid hydrogen.
- TheSpiceIsLife 8y agoWhat does "conduction cooled with cold heads" mean?
- azernik 8y ago"Cold head" means the cold end of a cryocooler. "Conduction cooled with cold heads" means that the superconductor is in direct thermal contact with the cold end, rather than through some more complicated arrangement.
- calaphos 8y agoThe (closed cycle) cooling compressor uses helium as a working fluid, but Tue quantities are usually very low. Hight temperature superconductors are usually cooled with just liquid nitrogen