3 ms·
I have a Presto pressure cooker. The blowout disk is a piece of rubber/plastic built into the cap. I have a hard time imagining it getting contaminated in a way
by Scoundreller 8y ago
I have a Presto pressure cooker. The blowout disk is a piece of rubber/plastic built into the cap. I have a hard time imagining it getting contaminated in a way that surpasses the strength of the stainless steel lips on the lid/pot.
Its design hasn't changed since 1977.
It's not a tube that a bean could get into. Maybe you're thinking of the vent pipe? When that gets clogged, the overpressure plug is what blows away to release all the pressure.
- Piskvorrr 8y agoWell...I have seen the whole lid, firmly embedded in the ceiling. IDK what the brand was, but apparently the failsafe (a rubbery thing, off-center of the lid) failed to fail-safe in that case. Looking into RAPEX, I see multiple recalls for this specific issue (pressure buildup leading to uncontrolled blowout); all for brand names that are unfamiliar to me.
- Scoundreller 8y agoOf the 12 recalls I found on that database, none specifically mentioned failure of a blowout disc/plug1. 1 depended on the rubber gasket itself as the blowout valve. Several could be opened while under pressure, and some were deemed structurally deficient, which I take to mean that the vessel wasn't (consistently) built to withstand the design pressure (and a margin of safety). [1] 1 did reach 290kpa (42psi), nearly triple the typical pressure cooker. Not sure what happened on that one.