4 ms·
I works really like one of these projects to trial a 'practical' last mile, like something like cat6 for the last 100m. In KC, I live in a 4 story apt, and fre
by exabrial 8y ago
I works really like one of these projects to trial a 'practical' last mile, like something like cat6 for the last 100m.
In KC, I live in a 4 story apt, and frequently stopped to talk to the installers when Google fiber was pulling everything into the building. It really is Fiber to a jack in your unit, but the last 5ft is still copper Ethernet. I figure they could have saved themselves a bundle of $ if they ran copper inside the building. The consumer wouldn't notice and it's a lot more practical.
- kiallmacinnes 8y agoI don't think they would have saved a bundle at all. I've no references to back this up, however - I would guess the dominant cost of installing cable (fiber or cat6 or coax) is not the cable itself, but the permits and staff hours etc required to do it. Installing fiber is more future proof, resulting in - potentially - less costs down the line.
- briffle 8y agoFor all but the smallest apartment buildings, this is not a good idea. Ethernet has a 100m limit. By the time you go up a wall, back down it, zig and zag around things in the ceiling, etc, you can quickly hit that limit. Then you can start getting errors such as packet loss, crosstalk, etc. Yes, it depends on the size and layout of your building (maybe your building has a comms cabinet on each floor, or wing, etc) but its better to have one set of training for all your installers, rather than have every one be different.
- planteen 8y agoI did technician work as a side job during college. It seemed like most dorms had data closets every floor/every other floor. Some buildings only had them in the attic and basement, but they were also usually limited to 4 levels. Are most large apartment buildings similar?
- kiallmacinnes 8y agoDoes it really matter if there are comms closets nearby though? It wouldn't surprise me if fiber optic cable was cheaper than cat6 to buy in bulk (Copper is expensive, and the process to manufacture the copper cables is more complex), and if you're doing fiber to the building anyway, you still end up with a media converter - so there is likely no significant cost saving there either. It may actually be higher cost to have a centralised (within the building) media converter - ports need to be provisioned for the max possible customers up front. The class of hardware will likely be different too - matching enterprise style datacenter hardware, instead of the cheap and easy to replace stuff they send to customers...
- planteen 8y agoThis was 10 years ago, but the data closets had SFPs on the switches for the fiber. So the cost of the "media converter" was really low - just needed a few. There was existing CAT5 in the walls, all of the runs would be well less than 100 m which is why I brought up the comm closets. For a new builds, I have no idea for the cost difference. But for the insane number of buildings wired with CAT5/CAT5e/CAT6, this solution works well. Trying to pull fiber to replace CAT5 (as in without removing the drywall) would be very expensive and likely to damage the fiber.
- Tijdreiziger 8y agoThe downside is that you then need to give your subscribers modems. The dorms in my university town have Ethernet in them, and it's a hook-up-your-own-device type of deal.
- tw04 8y agoUsing cat6 would mean you've just invested in the next 5 years, 10 Max before that all has to be ripped out. By going fiber to the last 5ft, you theoretically can use the same infrastructure for the next 50 years. If they had started doing single mode fiber in the 90s, upgrading us to 10gbe would be an optic swap in a pop, not digging cable out of the ground.
- 15155 8y ago> upgrading us to 10gbe would be an optic swap in a pop, not digging cable out of the ground. This is assuming the physical glass was rated for that kind of bandwidth. Cat6a can "technically" do 10gbe
- tw04 8y agoWe're talking single mode fiber, not miltimode. The glass hasn't changed in 25 years.
- gascan 8y agoWith the cost of copper rising, who knows, maybe fiber isn't all that much more expensive, at least when you're buying a lot of it.
- smileysteve 8y agoRealistically, Google is rethinking Fiber for a wireless solution; Wireless cuts down on the fiber, copper, and individual install costs -- and is therefore cheaper to upgrade in the future; A mesh network with a node near every door and if you need more coverage you add more nodes.