6 ms·
> They don't tell you that closing the CPU guard feels like you're breaking hundreds of dollars worth of equipment 100 percent of the time. I had a brief summe
by Symbiote 9y ago
> They don't tell you that closing the CPU guard feels like you're breaking hundreds of dollars worth of equipment 100 percent of the time.
I had a brief summer job as a 17 year old, assembling computers. Even after over 100, I still had that feeling of imminent destruction of expensive electronics.
- cptskippy 9y agoPssssh... you don't know fear until you've tried to put a spring clip cooler on an Athlon XP or Pentium III without rocking it. Even after they added those foam circles to the corners it didn't add much comfort. Nothing makes you sicker than the sound of a corner of your CPU die crunching.
- baddox 9y agoOh, great memories. Those were absolutely terrifying, but luckily I never broke one and only had one instance of a friend breaking one. The absolute worst was when I (being a more experienced PC builder) was helping a friend with his first build, and the friend insists that I install the cooler.
- Scoundreller 9y agoMy spouse does the same thing. "Why don't you choose" == I get blamed if it's not the better choice.
- qplex 9y agoI destroyed my 600MHz Pentium III while fiddling with the cooler. A corner of the chip broke off. I used the same motherboard and bought an adapter which allowed an upgrade to a 1,3GHz PIII Tualatin. It had a proper headspreader so the installation was a breeze in comparison. The horror ensued on my next upgrade to an AMD Athlon XP 2800+ which again had the die exposed, but thankfully I never managed to destroy it.
- russdill 9y agoOr worse, taking it off.
- simcop2387 9y agoWe had one of the sockets on one of those fail. Never figured a real reason for it, just one day all the sudden with the computer on there was a big snap, the cooler fell off and the CPU cooked itself. Was well outside any kind of warranty but it was certainly a unique failure.
- dvtv75 9y agoAt the beige box retailer I worked for, about a decade ago, we got a couple of the local high school's computers in for repairs. They told us the systems just wouldn't boot, and they "smelled funny." Took the case off, and behold! The Intel fan had seized, melted, and caught fire. It wasn't a particularly old system so I'm not sure how the thermal protection didn't kick in, but that had happened on two near-identical systems. No saving those boards.
- watersb 9y agoFor a couple of years, 2007-2009, I kept encountering budget-build AMD boxes with cooked thermal compund. The first time a client brought in a comouter with the heatsink rolling around loose on the bottom of the case, I thought it was rough treatment, customer error. But then two more, Dell instead of eMachines or Compaq... weird.
- cptskippy 9y agoThat's not surprising. Towards the end of the Mhz Wars the heatsinks had become pretty ungainly but they were still using the flimsy spring clip instead of the more modern 4 post or gantry type systems used today (sorry I'm sure they have proper names but damned if I know what they are). I had a solid copper heatsink that was easily 5lbs for my Athlon XP system. I held onto it for the longest time after I got rid of the system because I knew the metal was easily worth $20.
- news_to_me 9y agoWhen I built my PC, I learned about this beforehand, so when I heard the "crunch" I wasn't worried. Until the thing wouldn't boot. I took the CPU out, and sure enough, I'd bent a few of the pins in one corner. Fuck. I then spent the next couple of hours with a tiny magnifying glass and tweezers, painstakingly trying to bend the pins to where it would boot again. 20 min of bending, stick the CPU back in, try to boot... nothing. Several times. Finally it booted, miraculously. I'm never taking that CPU out again.
- AceJohnny2 9y agoAfter a decade doing embedded development for bleeding-edge SoCs and working with devkits with sockets for interchangeable chips... I was kinda shocked when I once again built a gaming PC two years ago... These are antiquated connectors! Then again, I hear the sockets we use for the BGA chips I work with cost in the thousands of dollars (because custom-desiged), so I can kind of understand that the razor-thin margins the custom PC industry works with stays with cheap old connectors.
- bri3d 9y agoWhat socket was it? I think all modern sockets are LGA - and even before that, they were ZIF for a long time.
- shadowfacts 9y agoAMD processors still use PGA sockets, but they are ZIF.
- lsc 9y agoReally? the last opteron I saw with a zif pga socket was an opteron 940, which was obsolete a decade ago. I haven't worked with the gaming amd sockets, but I bought a tonne of 2000 series opterons, socket F is LGA, and a few c32 and G34 opterons, all LGA.
- 9y ago
- flyinghamster 9y agoHeh. I've built a bunch of systems over the years (including updating and moving motherboards around), and I'm always nervous when I power it up the first time. Especially my latest, when I updated my main rig to a Ryzen 7/32 GB ECC/250 GB NVMe setup. About $1000 worth of new hardware, and the POST delay nearly gave me a heart attack. I shouldn't have worried, though, it worked on the first boot. wipes sweat from brow CPU cooler installation always seems to be the worst part of it, and there just doesn't seem to be a way around that, since lots of force is needed to squash the cooler down and insure good contact. Still, I like the screw-down setup on the Ryzen far better than the older spring-clip designs, or the spring-loaded pegs on Intel coolers.
- Terribledactyl 9y agoI just put a threadripper build together and was surprised with an extremely difficult and finicky foxconn socket. Takes a while for my monitor to wake up and was sure I had killed it on first boot with the stream of cryptic messages from the motherboard, but it was fine.
- simooooo 9y agoThose sockets are driving everyone crazy. Lotes ones seem to be ok
- nasredin 9y agoGoing on a tangent. The best way to apply thermal paste AKA TIM: the thinnest possible layer ALL over the processor's surface. The pea method IMNSHO is stupid!
- Deestan 9y agoThe pea method eliminates bubbles. A thin layer does not.
- watersb 9y ago"Tinting" the cleaned surface of the CPU with thermal compund, mostly removed with a credit card or thin plastic scraper... and then applying the pea... Could it be that there is some merit to the "thin layer all over" message? But yes, easy to mis-communicate. I had not considered the problem of bubbles.
- cr0sh 9y agoI think those damn intel fans with the four corner press-n-rotate "screws" were the worst; every time it felt like you were going to crack the mobo in half...
- dvtv75 9y agoI feel you. My pulse would race every single time I felt the board buckle as I applied pressure.
- TeMPOraL 9y agoI just replaced a cooler like that yesterday morning (with another one with the same screws)! Pretty annoying to work with. Funnily, those screws also sort of fit into the grid on the back of my computer case, so I mounted the old cooler externally, and it helps draw the hot air out. No reason to throw away a good PWM-controlled fan if you have a free connector on the motherboard, after all.
- z3t4 9y agoAnd after a few minutes of trying you've forgot in what direction you are supposed to screw them ... If you're doing it for the first time, try a few times without the thermal paste so you get the feeling of it. Then the pins will also go down easier when you do it for real.
- samstave 9y agoWhen I was 17, I got a gig helping the IT department for the nearby middle school -- Fixing Apple ][e machines.... The first thing they were having me do was to de-solder bad memory chips on the mainboards. So, yeah talk about stress.
- ianai 9y agoThat’s a pretty lucrative skill though. Or was.
- HarryHirsch 9y agoYes, replacing capacitors on Pentium 4 mainboards that are controlling equipment that the university cannot replace the license for is still lucrative.
- jacquesm 9y agoFirst you cut off all the legs, then you desolder the pins one-by-one. That way the risk of motherboard damage is nil.
- meddlepal 9y agoYep installing the CPU is literally the most nerve wracking part of PC building. Aftermarket heatsink is a close second IMO.
- shadowfacts 9y agoI didn’t have trouble with the CPU or the cooler. The memory, on the other hand, with the insane insertion force required, was pretty scary.
- meddlepal 9y agoHmm odd... Maybe motherboard dependent? I've never felt uncomfortable slotting RAM in. CPU definitely... The modern video cards that weigh like ten pounds also give me pause. Not because slotting them is hard but because they sag.
- snvzz 9y agoI find CPU easy, but the heatsink is absolutely the hardest.
- meddlepal 9y agoWasn't saying CPU is hard just nerve wracking as it crunches. Heatsinks are annoying as fuck. The first time I did a CoolerMaster H212 EVO I botched install... Had to pull it off which is a careful exercise in and of itself as you sort of wiggle slide it off the top of the CPU which is glued to it with thermal paste at this point and seated to the motherboard.