6 ms·
The only good Belkin product I have ever seen is their 12 outlet power strip. As a network engineer everything they make with an Ethernet/wifi interface is comp
by walrus01 9y ago
The only good Belkin product I have ever seen is their 12 outlet power strip. As a network engineer everything they make with an Ethernet/wifi interface is complete shit. But this is not really news, D-Link, Netgear, many of their competitors are also junk.
- duxup 9y agoEvery Belkin product I owned was garbage... but just like you I ran across a couple power strips that are surprisingly good. I don't know if they bought someone who knew what they were doing with power strips or what, but .... i'm still using them.
- walrus01 9y agoI have a lot of these: https://www.amazon.com/Belkin-12-Outlet-Protector-Protection-BE112234-10/dp/B000HPX46U https://www.amazon.com/Belkin-12-Outlet-Protector-Protection... My theory is that they are good because electrical safety is something that is actually regulated. UL and CE certification to sell as a consumer device. Whereas there is no penalty or regulation for shitty routers with shit firmware.
- duxup 9y agoYup that is it, the other models are pretty capable too. I like your theory, that makes sense. Guys behind the power strips can pull the old "Nope can't cheap out here, there are standards!" While the guys working on the POS USB hub or dongle or whatever can't say the same.
- chx 9y ago> UL and CE certification to sell as a consumer device. Reminder: > CE marking does not provide any specific information to the consumer. It is not a quality assurance declaration, it does not show evidence of third-party testing, and it should not be confused with any independent certification mark of the type issued by international or European notified test bodies.
- walrus01 9y agoYou are absolutely right. I meant the TÜV test mark for Europe. I'm more familiar with us-canada stuff. https://www.esasafe.com/electricalproducts/marks https://www.esasafe.com/electricalproducts/marks
- Tepix 9y agoThere's also the CCC mark for the Chinese market.
- janekm 9y agoThat’s not entirely correct. The CE Mark is a representation by the manufacturer / authorised representative that the device conforms to all relevant European directives, including the electrical safety ones (which typically require additional marks and third party verification).
- leemailll 9y agoTheir power strips are pretty good, not so for another stuff I tried
- thomastjeffery 9y agoTo contrast, every Linksys product I have owned it fantastic, so long as you flash DD-WRT/tomato/etc. My main complaint with Belkin is that you don't have that option.
- reaperducer 9y agoI think it's something of a natural progression with accessory companies. Their core competency is something innocuous like mousepads and power strips. Then they advance into more delicate and complicated electronics and the wheels fall off the wagon. It reminds me of the early and mid-1980's when office supply companies decided that they should branch out from selling paper to making floppy disks. They were cheap, especially in bulk, but over time they had a much higher failure rate. Eventually the only brands you could count on to work properly were BASF, 3M, Elephant Memory Systems, and IBM. (And probably a couple of others)
- fro0116 9y agoDo you have any recommendations for alternatives?
- walrus01 9y agoSeparate the function of wifi and router. My home office, which is bottlenecked by the docsis3.0 last mile, is on a Ubiquiti edgerouter-x ($46) router. And then a single ubnt UAP-AC 2X2 MIMO, dual band 802.11ac AP ($79). The OS on the ubnt edgerouter series is a fork of vyatta, which is Debian based. Also for people who know what they are doing, a mikrotik rb3011 would be a good choice.
- deleted 9y ago[deleted]
- oneweekwonder 9y ago> Also for people who know what they are doing The recommendation for the rb3011; or winbox and routerOS in general? While it is not perfect. I do not know of other vendors with open docs like the mikrotik wiki[0]. With winbox, wiki, and not to bad cli. I feel it a good starting point for non network engineers. Better then horrible web interface or arcane cli interface. Any recommendations for someone that want to learn to know what they are doing? [0]: https://wiki.mikrotik.com/wiki/Main_Page https://wiki.mikrotik.com/wiki/Main_Page
- stephen_g 9y agoI've generally found the Ubiquiti hardware to be a fair bit better than Mikrotik stuff (way better forwarding speeds with the accelerated Cavium processors in the EdgeRouters - except the ER-X, which doesn't have the hardware offload but is still useful). I find their web UI far less confusing too. I know some guys who have used Mikrotiks a lot and swear by it, but unless you're already experienced with Mikrotik interfaces I'd recommend the Ubiquiti. They also have a really good command line interface - which is lucky, because the biggest downside with the Ubiquitis is that some (generally more obscure and advanced) features can't be configured through the web UI.
- chx 9y ago
- cctt23 9y agoThe worst router I’ve ever seen was a D-Link. I was in a position where I had to provide support for it, and in the end I gave up and bought them an ASUS with my own money. It ended up being worth it, just in terms of time and aggravation saved. The software and firmware on the D-Link were garbage, and so was the actual build.
- ieo2929 9y agoUbiquiti ftw After a brief romance with VyOS and RPi based APs, Ubiquiti came along and swept me off my feet Currently using their gear throughout a 300-ish person office. Easy to setup, no issues that weren’t our fault in the first place. Great kit for startup and growing type situations
- Roritharr 9y agoWe use the Ubiquity Stuff and are also mostly happy, but it's not really as Enterprise-Grade as it tries to sell itself as. We use the Ubiquity Security Gateway Pro and have for over a year now issues with it's WAN Fallback. In the beginning it simply wouldn't Fallback at all, after lot's of Customer Service and three patches it actually did it's thing, but since then whenever the fallback happened our whole connection got instable until the USG is restarted. Once we even had issues because the USG thought WAN was down because it couldn't reach Ubiquity's Ping site (It was down) and so the connection started flip-flopping between two stable connections. Besides that the Ubiquity Needle is now firmly stuck into the arm of our Admins and all the Network Gear we buy is from Ubiquity.
- sitepodmatt 9y agoYikes that is poor, you'd think they'd have at least a few big sites (not all on aws either) to validate connectivity problems against, or at least make it configurable. Doesn't Google have a connectivity validation site on an anycast ip replicate across their global DCs?
- jmiserez 9y agoHaven’t had a single issue with my Ubiquiti AP in 2 years. None of the other consumer-grade APs even came close, I had issues with all of them (Netgear, Linksys/Cisco, AVM, Zyxel, TP-Link, MicroTik, even Apple Airport), and I wasn’t buying the lowend models either. Most needed reboots as they’d stop working from time to time, many had flaxy Wifi or sudden long network lags for no reason, and the MicroTik even bricked itself requiring a reflash of the firmware. Things might be different when it comes to enterprise gear.
- callmekatootie 9y agoI did not have any issues with their router. But that's not what I remember Belkin for: I was in conversation with their customer service on the phone and it disconnected. Frustrated, cause it meant I had to call them back and there was no guarantee that I would get the same agent again, I gave up calling them. However, in 5 minutes, I got a call back from them - the same agent called me back and did manage to resolve my issue. This was in India and prior to that, such service was unheard of (and not many still have that even today). The device did not give me much trouble so I don't completely agree with the above.
- fwgwgwgch 9y agoIndia or otherwise that's basically rare.
- azernik 9y agoThat's kind of the curse of the consumer market. When it comes to that kind of appliance, consumers care about sticker price above all. It's a brutal race to the bottom. I worked at Meraki, and institutionally we were deathly scared of dealing with that market; we were perfectly happy to stay in the enterprise market, where buyers were actually willing to pay for quality.
- aetherspawn 9y agoWell, the only Thunderbolt 2 to HDMI adapter I've used that actually worked well (and I tried 2 others .. they're expensive too, I must have spent ~$150 in the process) was the Belkin ones. The others didn't, for whatever reason, work when both Thunderbolt 2 ports were in use and the internal display was also turned on (on my '14 MBP). Other dongles for example randomly lost one of the color channels, had noisy output, occasionally flickered black or didn't work when waking up from sleep.
- ghostly_s 9y agoSurely you're talking about MiniDP->HDMI adapters? Thunderbolt2 is also MiniDP, I'm not sure why a TB2>HDMI adapter would even exist.
- pc86 9y agoWhat do you recommend for a simple home network with a few computers and mobile devices?
- JustFinishedBSG 9y agoUbiquiti or Mikrotik "prosummer" brands
- illegalsmile 9y agoI second Mikrotik. I think my little home AP for my small house was $50 and it's absolutely great.
- prolepunk 9y agoEverything that runs OpenWRT is usually a good choice. TP-Link?
- thrillgore 9y agoI actually got good mileage out of Netgear stuff, but two years ago I changed it out with an ASUS Router (AC66U) and I've been happy. They originally weren't aggressive with security flaws, but they've righted the ship on that. D-Link gear is hot garbage.
- jontro 9y agoTheir USB-C docks for macbook pro works great. A lot better than other usb-c alternatives. We also used the previous version for older macbooks with thunderbolt and never had a problem with them.