8 ms·
Repairing the card reader for a 1960s mainframe: cams, relays and a clutch
- jf 9y ago> The Computer History Museum in Mountain View runs demonstrations of the IBM 1401 on Wednesdays and Saturdays so check it out if you're in the area; the demo schedule is here: http://www.computerhistory.org/hours/ http://www.computerhistory.org/hours/ Regarding the IBM 1401 (to borrow from "Ferris Bueller's Day Off") It is so choice. If you have the means, I highly recommend seeing it in person. I've had the pleasure of seeing several presentations and even punching cards to be run as part of a demo program. The machine is impressive to see in person and the volunteers who run the tours are a lot of fun to talk to!
- linker3000 9y agoAgreed - if computer tech is your thing it's a really good place to visit. I was roped in to one of the Babbage Engine demos a few years back...I turned up about 10 mins early and started to talk to the presenters, who were really nice guys. When I volunteered that I'd also seen the other replica Engine in the Science Museum in London, the chaps were proud to point out that 'theirs' could be operated and was not behind glass. I was then asked if they could refer to me at a suitable point to mention those facts and give my impressions on the presentation, which I was happy to do!
- oneplane 9y agoCuriousMarc (I think, not sure if typed correctly) has a lot of behind the scenes videos on YouTube for that vintage computer stuff, mostly at the Computer History Museum where they work on the IBM 1401 and the Xerox Palo Alto. Some of the repairs are for the tape drives, some are for the CPU itself, it's all really interesting to see.
- kens 9y agoCuriousMarc's YouTube channel is https://www.youtube.com/user/mverdiell https://www.youtube.com/user/mverdiell and has lots of videos of the IBM 1401 as well as the Xerox Alto restoration, HP hardware, and other interesting things.
- jxramos 9y agoCool stuff, I'm watching [The IBM 1401 compiles and runs FORTRAN II](https://www.youtube.com/watch?v=uFQ3sajIdaM https://www.youtube.com/watch?v=uFQ3sajIdaM) and seeing that alternating green and white printer paper brought back some old memories of when dot-matrix printer paper was used as scratch paper during school days. Impressive to even see its still for sale https://www.google.com/shopping/product/13500800368299416699 https://www.google.com/shopping/product/13500800368299416699
- oneplane 9y agoI like how they also have a lot of stuff on custom hardware, like FPGA boards to read the diablo disk packs and the 1401 tape emulator.
- linker3000 9y agoA good write-up and read, as ever, Ken. I've a punch card from that machine (somewhere!) - picked up the last time I visited the museum. I used to fly over from the UK a few times a year to visit corporate HQ in San Jose, and I used to enjoy taking the VTA light rail to Mountain View at the weekend and walking to the museum. Sadly, I have now changed jobs so the chances of coming over again are very low - unless you need to hire a 'specialist' to hold your multimeter!?
- kens 9y agoWe can always use a specialist multimeter assistant, but the pay is low :-)
- linker3000 9y agoOK, I'm in. If pay is low, I may have to line up a side gig at somewhere nearby - know any local business that do computer-oriented stuff!?
- gtirloni 9y agoKen was recently in the Unnamed Reverse Engineering podcast and it was very interesting too: http://reverseengineering.libsyn.com/005-circuits-that-go-to-nowhere http://reverseengineering.libsyn.com/005-circuits-that-go-to...
- ivoras 9y agoIt's humbling to thing that today, doing the same thing (if for some reason we'd like to use punched cards) we'd do the same thing with a $10 camera, a $35 Raspberry Pi and some trivial OCR-like software. Heck, even an ESP8266 could process images that simple.
- maxerickson 9y agoThe machine in the article does 13 cards per second. A cobbled together OCR machine probably isn't going to match that.
- slantyyz 9y agoYou could probably get something like a 10+ year old document scanner like a Scansnap 500 cheap. Those can hit 18ppm. edit: I realize this isn't 13pps, but it's not bad.
- kens 9y agoExactly! Being able to reliably read 13 cards a second from a stack is quite a feat, requiring precision components such as picker knives and jogglers moving at high speeds. (I am not making up the joggler; it uh joggles cards into alignment.) Optical reading would avoid the metal brushes, which get out of alignment or make intermittent contact, but that's not the hard part. Yesterday's "Why Paper Jams Persist" in the New Yorker is also relevant, a look at why its difficult to move paper through a printer reliably. Punch cards, being made of paper, have the same problems but worse - they are weakened by the holes, and mistreated by the public. (Older readers may recall "Do not fold, spindle or mutilate" printed on punch card utility bills and such.) https://www.newyorker.com/magazine/2018/02/12/why-paper-jams-persist https://www.newyorker.com/magazine/2018/02/12/why-paper-jams...
- WalterBright 9y agoA long time ago, I discovered that a nearby neighbor had a beautiful Mercedes limo from the 50's in his garage. I asked him about it, and he said he had restored it. I asked him how he dealt with acquiring parts that were no longer available. He replied: "Oh, I made them." Me: "What...." So he showed me his full sized basement, which was a fully equipped machine shop. He'd built working steam locomotives that were several feet long, and other mechanical models, all working, all from scratch. I was amazed. I asked him what the Mercedes was worth, and he replied, and I remarked that it couldn't be worth all his labor he put into machine work. He agreed, and said it was his hobby and evidently made him happy. These days, of course, you can just make a drawing of what you need and send it to one of those online machine shops.
- ams6110 9y agoMercedes-Benz "Classic Center" still has parts for all their cars, at least the post-war cars. Not to say that it might not be cheaper to make your own in some cases if you already have the means and skill to do it.
- WalterBright 9y agoMaybe they do now. That fellow had restored his in the 1970's. Or at least with the internet it is a lot easier to find someone stocking old parts. Jay Leno's Garage employs machinists to make unavailable parts. Most car companies start to shut off making parts for cars older than 10 years.
- sokoloff 9y agoMy family restored (to good driver condition) a '59 220S (just sold); our experience was that not every minor cosmetic or interior part was available at Classic Center. Mechanical and functional part availability is excellent, pricing reasonable, and the staff there is top-notch, but they don't have everything.
- wcunning 9y agoAhhh, that's the dream. I just let a friend use my mill to bore out and sleeve the cylinders in the brake calipers for his vintage Corvette rebuild. On a side note, that's the sort of thing you generally don't know about a neighbor -- that they have a complete machine shop in their basement. I wonder occasionally what miraculous things people I don't know well do in their leisure time.
- zw123456 9y agoWhen I was a grad student back in the late 70's, I worked in the campus computer center where all the undergrads had to use Hollerith cards and only the grad students got to use CRT terminals. There was one card reading machine that was known to be flakey and would mis-punch the letter E occasionally and I used to love it when they would come up to me all frustrated that their program would not run and I would pull the offending card from their deck and hold it up to the light and pretend like I could sight read Hollerith and tell them they had a mis-punched card. They all thought I was a god... until someone would clue them in not to use old reader #11.
- abraae 9y agoFantastic as always Ken. I spent years of my life repairing IBM mainframes and I love these info drops. I guess its part of human nature to assume that our predecessors were dumb peasants (how did they build those pyramids?) but IBM had some incredibly sophisticated and elegant electromechanical, pneumatic and hydraulic systems in those days. The worst beast I used to work on was the 3890 check sorter https://en.wikipedia.org/wiki/IBM_3890 https://en.wikipedia.org/wiki/IBM_3890. This monster filled a (large) room, and when it was down, stress points went through the roof as bank's check sorting and money clearance ground to a halt. There's nothing like having a furious CEO leaning over your shoulder shouting at you while you're elbow deep in a dusty noisy furiously spinning machine to raise your blood pressure.
- jacquesm 9y agoHeh, that very much reminds me of fixing an industrial sewing machine. This machine was made by Naumann, an East German absolutely rock solid piece of engineering. The mystery was that one day to another it stared eating needles, and in some cases spat out the broken pieces at high velocity in all directions. The good news is that you can spin a sewing machine very slowly by hand to see what's going on and while doing so I saw that - obviously - the needle was going down into the spool chamber at precisely the wrong moment, with the spool chamber still being closed. It's a very intricate mechanism that passes the needle thread under the spool using some black magic to pretend the mechanism comes apart while it does the move. Timing is super precise. Like in the card reader example the origin of the problem was a part that had slipped on shaft. Apparently a bunch of thread had gotten stuck solid enough that it had wedged one of the cams hard enough that the shaft inside it had continued to move. Even after finding the cause it still took forever to figure out the right setting (no markings on the shaft, no service manual for that particular machine indicating the right angle) but eventually I got it working and it still works today. I love those old fashioned pieces of machinery, if a modern day appliance would break there is a good chance you would not be able to do anything about it, but this old stuff just takes some patience and basic observation skills and you can keep it going.
- wcunning 9y agoI spent a while learning about sewing machine timing and repair a couple of years ago after buying a very nice vintage Elna at a thrift store for $20. Turns out that the way most of the timing is set is based on the height of the needle when the shuttle mechanism underneath is in a particular place. You loosen the set screw on the collar that connects the upper and lower mechanisms, set the needle to the height of a gauge block from the manufacturer and then rotate the lower mechanism until something lines up, then tighten the set screw. Those blocks are almost all long gone for anything that's still mechanical, and the modern machines are all electronically timed with stepper motors in the top and bottom. Fascinating stuff if you dig into it.
- nandhp 9y agoThat's a good use for 3D printing, assuming someone knows and can publish the appropriate measurements for the gauge block.
- minikites 9y agoIcelandic musician Jóhann Jóhannsson composed an album of music created with sounds created by the IBM 1401. This particular track also includes what seems like an audio recording of a technician going over the machine's specifications and some basic troubleshooting: https://www.youtube.com/watch?v=KPFAkBCizr8 https://www.youtube.com/watch?v=KPFAkBCizr8 More information here: https://web.archive.org/web/20120307215225/http://www.ausersmanual.org/data/ https://web.archive.org/web/20120307215225/http://www.ausers... >In 1964, a computer - the IBM 1401 Data Processing System - arrived in Iceland, one of the very first computers to be imported into the country. The 1401 has been called the "Model T" of the computer industry - the first affordable, mass produced digital business computer. The chief maintenance engineer for this machine was Jóhann Gunnarsson, my father. A keen musician, he learned of an obscure method of making music on this computer - a purpose for which this business machine was not at all designed. The method was simple. The computer's memory emitted strong electromagnetic waves and by programming the memory in a certain way and by placing a radio receiver next to it, melodies could be coaxed out - captured by the receiver as a delicate, melancholy sine-wave tone.
- Animats 9y agoThat's such an IBM design. IBM mechanical designers were used to designing systems with continuously running shafts and electromagnetic clutches, because that's how tabulating machines worked. Early card readers were unreasonably complicated. Then came Documation.[1] They solved the problem of card feeding. There's a air jet system which spaces out the cards, and a vacuum picker which pulls the bottom card off the stack and feeds it into feed rollers. The card path is straight and simple, card picking is not highly sensitive to card thickness, and the machine is far simpler than the 1402. Documation soon owned the card reader business. [1] https://www.youtube.com/watch?v=qu55b0GpgE8 https://www.youtube.com/watch?v=qu55b0GpgE8
- IgorPartola 9y agoWere things like servos and stepper motors things that came after this era? This seems... awfully mechanical for what it’s doing.
- breakingcups 9y agoI love articles like these, even though I wasn't alive when these machines became widely used they are fascinating to read about. Unfortunately I live nowhere near a museum with a functioning mainframe, but I would love to see one in action someday.
- fernly 9y agoAlso be sure to find the link to the schematic, which is kind of buried in a footnote. 59 page PDF. http://bitsavers.org/pdf/ibm/1402/1402_Reader-Punch_Wiring_Diagram.pdf http://bitsavers.org/pdf/ibm/1402/1402_Reader-Punch_Wiring_D...