6 ms·
Easy laser-cut electronics cases for maker boards (2017)
- stevekemp 9y agoThat's pretty cool - it's easy to note notice how cheap a lot of this kind of stuff has become. Earlier in the year I wanted to have a case made for one of of my electronics projects, and managed to find a free design from thingiverse.com, then pay a local person a small amount of money to get it 3D-printed. Over time I've gotten more tempted to have a 3D-printer of my own, but I don't think I could quite justify the expense.
- SSilver2k2 9y agohttps://www.monoprice.com/product?p_id=15365 https://www.monoprice.com/product?p_id=15365 $219.99 - great quality but the price means a small bed size. reddit.com/r/3dprinting for a great community all about 3dprinting!
- StavrosK 9y agoYou can get a Wanhao/Monoprice i3 for $300 or so, and it's a fantastic printer.
- hwillis 9y ago3d printing is incredibly powerful for hobbyist electronics- you can make professional quality stuff[1], only limited by your creativity and design sense. Home FDM printers are so good that you can 3d print working threads even on cheap machines! If you spring for a more expensive lithography or sintering machine, the parts are effectively indistinguishable from commercial parts (aside from obvious technical differences like the lack of witness marks). The prices are just ridiculously low now as well. $160 + tax and shipping gets you a printer[2]. Obviously you pay for that in terms of continual fiddling and reduced quality (and the $220 MP select mini is probably a better choice), but even that's better than how it used to be. $600 will get you nearly hassle-free prints and $750 will get you one of the best printers on the market[3] (well, almost on the market). Arguably the new Prusa is the best option out there- right now it has features that no other printers do, certainly not with the same build size. Really impressive bit of kit[4]. IMO 3d printing is legitimately at the point where if you're making things at home, a 3d printer should be on your list of tools to buy even before a mill. Obviously it depends on what you want to make but it now takes way longer to learn and use modeling software than to set up and tweak your printer. [1]: https://www.youtube.com/watch?v=s3O0jKvxUIM https://www.youtube.com/watch?v=s3O0jKvxUIM [2]: https://www.monoprice.com/product?p_id=21666 https://www.monoprice.com/product?p_id=21666 [3]: https://shop.prusa3d.com/en/3d-printers/180-original-prusa-i3-mk3-kit.html https://shop.prusa3d.com/en/3d-printers/180-original-prusa-i... [4]: https://www.youtube.com/watch?v=hwNIzQLtHnU https://www.youtube.com/watch?v=hwNIzQLtHnU
- kevin_thibedeau 9y agoI wouldn't spring for a Monoprice Delta until they fix the firmware issues. WiFi freezes, poor bed leveling, and X/Y dimensional accuracy are some of the issues that need to be fixed. Otherwise it's a nice unit for small builds.
- jstanley 9y agoAgreed with all of this. I bought my first 3d printer about a year ago and it quickly turned into one of the best things I've ever bought. If you're at all interested in making things at home, there's almost no reason not to own a 3D printer. I recently replaced the no-brand i3 clone that I initially bought with an Anycubic i3 Mega, and am very happy with the new machine. It's nice and rigid, easy to use, prints stick to the bed well while printing and pop off easily after printing. And all for less than £300. As you said, the hardest part about it all is learning the CAD software.
- alex_hitchins 9y agoI think this method give a much better quality feel than 3D printed cases and seems to be a fair amount cheaper. I'd love to be able to do stuff like this. Thought before of gutting old printers and going to DIY CNC route. To much cool stuff to do!
- hwillis 9y agoThe two-panel cases look very nice, but I hate the jigsaw-puzzle look of lasercut cases and mechanisms. It can be fairly strong but in practice people rarely put in the thought necessary for that. Carelessly designed lasercut cases can be very weak indeed. On the other hand 3d printed cases can be beautiful and much more sophisticated[1] than lasercut. You aren't limited by the need for huge gussets and dozens of pain in the ass square nuts. Plus you can have curved surfaces. [1]: https://hackadaycom.files.wordpress.com/2017/10/tuco_flyer.jpg https://hackadaycom.files.wordpress.com/2017/10/tuco_flyer.j...
- alex_hitchins 9y agoAh, intersting. I too am not such a fan of the jigsaw look, it was the rigidity and strength that I liked. If you say they aren't as strong in practice, perhaps 3D printing would be better. I've only ever seen really good prints come from expensive machines with a fair amount of post-processing going on. TBH currently I just get cases from Hammond most of the time. It's the creation of front panels as well that I'd like to achieve more cleanly. As it's just my hobby, I can just about put up with the misaligned square holes!
- gh02t 9y ago3D printed cases can look good with a bit of practice and the cost of a decent 3D printer is much lower than a laser cutter that can cut acrylic. Probably the most popular one with budger makers right now is the CR-10, which is big enough for pretty much any enclosure you could want and only costs $400. I make snap fit enclosures all the time with minimal (usually no) post processing. There isn't a lot of difference between high and low end FDM printers in terms of print quality, the difference is more with UI polish and idiot-proofness. With a bit of practice however you can get very high quality prints out of any recent printer as long as it isn't a total mess in terms of design.
- leoc 9y agoAnother good option for enclosing a small-board system would be an aluminium enclosure of the type used for guitar effects pedals. (Of course, a digital guitar pedal is an SBC in an aluminium box...) They're seriously robust (you can, of course, happily stand on one), they can quite easily be drilled to hold I/O and power ports and control interfaces wherever you want to put them, they can be painted or printed on in a variety of ways, they're available in a wide range of shapes and sizes and you can get them very cheap. See for example https://www.mammothelectronics.com/collections/enclosures https://www.mammothelectronics.com/collections/enclosures (just as an illustration: I don't know enough about this particular supplier to endorse them).
- squarefoot 9y agoAluminium is great but sometimes expensive depending on the application and the market: one can purchase an aluminium pipe/rod/whatever at a hardware store for a lot less than a stomp box enclosure made with the same amount of the material and sold online. It's a niche market where a couple sellers can easily fix the prices.
- leoc 9y agoFortunately there's enough demand from DIY and small-business effects makers that a good selection of different Hammond-like boxes is cheap and readily available online even as single units, at least if you're willing to drill your own apertures. Maybe USD6-USD12 or so per box isn't near the unit cost but it's low enough not to worry about until you need at least a few ten of them. If you can accept something lighter but less stompable you can also get similar plastic enclosures for even less from electronics suppliers.
- Animats 9y agoYes, there are lots of off the shelf enclosures. I've been using Hammond aluminum extrusions with laser-cut black acrylic end plates to fit the connectors. The result is a nice black box.[1] Many Arduino/Rasperry Pi type boards have connectors on every edge. It's hard to box those things. That's what motivates these two-plate "cases". If all the connectors are on one edge, it's easier to package the unit. [1] https://github.com/John-Nagle/ttyloopdriver https://github.com/John-Nagle/ttyloopdriver
- equalunique 9y agoSweet! These are quite simple & easy to use cases. For slightly more complex cases, I submit: http://www.makercase.com/ http://www.makercase.com/ (gives me certificate errors on HTTPS, but still quite useful) https://www.makeabox.io/ https://www.makeabox.io/
- tomcooks 9y agothe second link doesn't work, fixed: https://makeabox.io/ https://makeabox.io/
- equalunique 9y agoThank you, sir.
- oasisbob 9y agoI'm a big fan of the similar, but more philosophical, Sick of Beige cases that the Dangerous Prototypes folks came up with: http://dangerousprototypes.com/docs/Sick_of_Beige_compatible_cases http://dangerousprototypes.com/docs/Sick_of_Beige_compatible... They follow a standard size series, with standard mounting hole offsets, corner radii, etc. The idea being that if you're designing a PCB, you may as well go with one of these sizes because the laser cut cases are commercially available, or someone following the design can make their own easily too. They work great with minimal modification for the Pi, Adafruit protoboards, etc.
- stuntkite 9y agoI love dangerous prototypes sick of beige. I think they discontinued it, but they used to have an amazing SMD protoboard. I haven't seen anything quite like it since. Especially for the price.
- krutzger 9y agoThese guys also have a cheap laser cutting service if you want a more customized enclosure.
- squarefoot 9y agoI don't have much experience with acrylic cases that snap together, but all ones I tried so far were really easy to break, so that now I stay away from them unless I don't find alternatives.
- JKCalhoun 9y agoLOL, and the weird Insert-Tab-A-into-Slot-B look. Like brushed aluminum faceplates or art-deco bakelite, down the road they're going to scream the era they were created in.
- heavenlyblue 9y agoCall me conservative, but what happened to the dust collecting right below this crystal-clear case?
- chromaton 9y agoI found this fastener free laser cut case maker last week: http://imagio.dk/boxmaker/ http://imagio.dk/boxmaker/
- eltoozero 9y agoIf you don't have local vendors, you can use the cheap laser cutting offered by the dirtyPCB guys: http://dev.dirtypcbs.com/store/lasercut http://dev.dirtypcbs.com/store/lasercut (Hey it looks like the custom cable builder[0] is back online, woo hoo!) [0]: http://dev.dirtypcbs.com/store/cables http://dev.dirtypcbs.com/store/cables