5 ms·
Eye Strain from LED Backlighting in MacBook Pro (2008)
- gargravarr 9y agoThis is something I noticed as well - I upgraded from a PowerBook G3 to a PowerBook G4 in 2009, and then to a MacBook Pro in 2010. I bought the fastest non-unibody machine available, a 2.6GHz A1260. It lasted me very well, five years of daily use before I upgraded. However, I began to notice the backlight issue. I'm a writer in my spare time, so staring at a screen is an occupational hazard. With a CCFL screen, I can stare at it all day at a comfortable level. With an LED screen, full brightness is astonishingly bright, so you have no choice but to use it dimmed. I found I could only go an hour or two at a time in front of my expensive MBP, and for a long time I couldn't figure out what it was. I considered going back to the G4 many times. It was only after I started using an LED-backlit external screen that I spotted the connection. Apparently I'm a little more sensitive to PWM than average, although perhaps not as much as the OP of the Apple thread. At worst, after about 45 minutes, my expensive LED-lit monitor would give me migraines when dimmed, which the laptop didn't. Either LED technology has improved or I'm no longer sensitive to it, because my current Clevo laptop is LED (as is just about every screen on the market now) and I'm okay using it for long periods. I had to learn to tolerate the external screen on maximum brightness in a well-lit room for a long time. It's annoying and certainly not ideal, but I can't blame the manufacturers. CCFLs are power-hungry and toxic, and were always going to lose against LEDs. The technology is easily superior but lacks finesse. It only affects a minority of people, which is probably why it quickly supplanted CCFL - either no study picked it up, or it was such a small number that it could be ignored. I wouldn't want to keep using CCFLs but I wish they'd figured out a better solution before bringing LEDs to market.
- ksec 9y agoI wish there is a Standard where ALL LED, doesn't matter whether they are used in lighting, backlight, keyboard or what ever, small or big, to be flicker free. Or Extreme High Frequency. There are increasingly more shops, shopping mall, or whatever places it is, and Monitor, billboard etc, especially in China or made in China where culture are more price sensitive, using cheaper LED, so they could say they are governmentally friendly. ( There are also some government incentive in doing so ). And INSANE environmental groups which forces everyone to switch to LED. Many of these LED has flickering issues, that some people dont have a problem, some people are little annoyed but are fine with it, or some minority like me which needs to run away or I would puke or sick.* I tired LED lighting once, it started have flickering issues two years in. It was very minor, but enough to irritate me. I have since switch back to good old light bulb. *I have also discovered those who are sensitive to these flickering issues are also likely to be latency sensitive, as discussed in the computer IO latency and web latency.
- pathartl 9y agoI've always found LED Christmas lights to be the worst offender here. Most of the time this issue can be solved by buying quality LED bulbs and using the correct dimmer, if you have one. Walmart had 100-bulb LED Christmas lights on sale for $6 a string. This is just around the price of non-LED strings, however these are 120v rated LEDs that run right off the mains with only a fuse to protect them. Needless to say these things are tied to the 60hz phase. Since these were being put on my tree this year, I decided to do something about it. A simple full bridge rectifier fixed most of the issue. I think now the phase on the string is more around 120hz which is much easier on the eyes. I can still see the flicker, however it's not nearly as bad. I believe the thing that would fully rectify the issue (see what I did there) would be to throw a capacitor in the circuit to further smooth out the DC supply. Really it comes down to the idea of a diode; current flows in one direction. In an AC circuit, it flows both directions. Convert it to DC and smooth the supply out and you're using just as much energy without flicker. Of course this ends up costing more if the manufacturer were to implement, so there's that. I really just want DC throughout the house.
- RichardHeart 9y agohttps://www.notebookcheck.net/ https://www.notebookcheck.net/ always tests for PWM and otherwise has the best laptop reviews on the planet. Example of PWM test: https://www.notebookcheck.net/Lenovo-ThinkPad-X1-Carbon-2017-Core-i5-Full-HD-Laptop-Review.229966.0.html#toc-display https://www.notebookcheck.net/Lenovo-ThinkPad-X1-Carbon-2017...
- noncoml 9y agoNot sure if it is the OLED, but after switching from iPhone 7 to iPhone X I get terrible headaches when trying to watch Netflix on my phone before I go to sleep.
- walterbell 9y agoIt's a similar issue. The Samsung display in iPhone X flickers at 60/240Hz due to PWM brightness control of the OLED. This is more noticeable to the human eye at low brightness. Options are to use the device at higher brightness level or switch to iPhone 8. https://forums.macrumors.com/threads/eye-strain-while-using-iphone-x.2085427/page-31 https://forums.macrumors.com/threads/eye-strain-while-using-... https://news.ycombinator.com/item?id=16088173 https://news.ycombinator.com/item?id=16088173
- noncoml 9y agoIt explains it, thanks. It’s a deal breaker for me so if I could I would go back to 8plus.
- walterbell 9y agoApple will likely prefer a refund/exchange to paying for customer medical bills.
- dmitrygr 9y ago> My research into LED > technology turned up > the fact that it is a > bit of a technological > challenge to dim an LED. This is complete nonsense. While pwm can indeed be used, many of the nicer LED drivers are actually variable current. While adjusting the voltage directly indeed does not work as expected for LEDs, a constant current driver does indeed produce a constant brightness. Varying the current varies the brightness. Only the cheapest displays and lighting installations use pwm for brightness control.
- modeless 9y ago... and many car/truck taillights. I think PWM taillights should be illegal. The artifacts are distracting.
- ChadMoran 9y agoThis, so much this. I have nystagmus which means my eyes move uncontrollably. Primarily on the horizontal plane. While my brian compensates for this and I don't see a moving image anything that uses PWD flickers very, very badly. PWM tail lights are THE ABSOLUTE WORST for this condition. Not only do I see it on the source but I see it on anything the light projects onto, it's horrible.
- exikyut 9y agoWait. Contemporary nystagmus == saccades? I haven't tracked the cause down yet - I know it's a nerve issue of some kind - but sometimes my jaw, arms or eyes (yup) can occasionally jump. My jaw and arms jump when I'm nervous (or have a buildup of too much nervous energy/excitement), while my eyes jump when I'm trying to focus on something too hard, they drift, and I try to course-correct too hard. (I think half my brain is aware of the drifting, but the other half, the part that would make the fine motor movements to keep my eyes locked, is happily whistling away blithely in a corner somewhere.) When my eyes jump and I overcorrect when I fail to re-point them where they need to be, I usually have a second or two where I'm not technically blind but I need to let my eyes refocus and remember their purpose in life (if you will) :P I always thought this was nystagmus (read the term online one day and went "!!! that's what it's called!")... but now I wonder, is what I'm dealing with something else? (An aside: I'm really, really bad at tracking moving objects in space. If someone else is holding onto something and I'm expected to look at it, I have to hold it instead. No other alternative.)
- geofft 9y agoTitle should have (2008). (Also is there some current relevance that I'm just out of the loop on?)
- ebbv 9y agoNope, as far as I can see there is no reason for this to get posted. Seems almost like OP is trolling for karma because it has a controversial title and links to Apple.com.
- walterbell 9y agoThe thread is 164 pages long and active through 2017.
- ebbv 9y agoSo you think we should read 10 years of babbling by cranks who don’t like LED backlights on a support forum?
- walterbell 9y agoA statement from Apple would be best, for an issue that has affected customers for nine years. PWM backlighting was introduced on the iPhone X and is affecting some customers. edit: s/backlighting/OLED dimming/
- aceoflolo 9y agoWhy does the iPhone X need backlighting when it has an OLED screen?
- walterbell 9y agoMaybe someone who knows more about AMOLED panels can comment about the role of PWM? It seems to be something other than brightness control, the article at [1] says: At any level of brightness, modulation with a frequency of approximately 60 or 240 Hz is present ... It can be seen that the amplitude of the modulation is not very large at the maximum and near to it brightness, as a result there is no visible flicker. However, with a strong decrease in brightness, modulation appears with a large relative amplitude, its presence can already be seen in the test for the presence of a stroboscopic effect or simply with rapid eye movement. Depending on the individual sensitivity, such flicker can cause increased fatigue." [1] https://translate.google.com/translate?act=url&depth=2&hl=en&ie=UTF8&nv=1&prev=_t&rurl=translate.google.com&sl=ru&sp=nmt4&tl=en&u=http://www.ixbt.com/mobile/apple-iphone-x.html https://translate.google.com/translate?act=url&depth=2&hl=en...
- sschueller 9y agoInteresting, but don't CCFLs also "flicker" just at a much higher rate?
- exikyut 9y agoYes; I can see the flickering on my CCFL-based ThinkPad, but it's thankfully not annoying.
- walterbell 9y agoDetailed comparison of CCFL & LED flicker: https://www.infobyte.hr/blog/134/ccfl-vs-led-screen-backlight-is-led-really-better/ https://www.infobyte.hr/blog/134/ccfl-vs-led-screen-backligh... CCFL PWM flicker: https://youtube.com/watch?v=RHlvgo6b_2s https://youtube.com/watch?v=RHlvgo6b_2s LED PWM flicker: https://youtube.com/watch?v=84OCOX9O3PE https://youtube.com/watch?v=84OCOX9O3PE
- exikyut 9y agoYEOW. OUCH. I...... I am very glad I'm using a CCFL laptop. This is like going back to evil 60Hz CRT flicker!! I've just accepted I might need to rip out the LED driver board in a future laptop and replace it with my own design. Hopefully not, but if that has to happen then okay. Thanks for the reference to the comparison, that was also very interesting to go through (and bookmark).
- twobyfour 9y agoIt's evident that this sensitivity is pretty rare. But with essentially everything LED-backlit these days, living with that sensitivity sounds hellish!
- KirinDave 9y agoMost people can see these effects if they know how to look for them. Most "sensitives" are folks who accidentally figured out how to see them. It's really not at all clear that they possess some kind of higher clock rate for sampling optical images.
- exikyut 9y agoI agree (I replied to the other comment in this subthread).
- wlesieutre 9y agoI've noticed this with some LED light fixtures in people's houses before and deliberately don't mention it because once you see it you can't unsee it. Particularly evident on things like running water in a bathroom. I can deal for a few minutes, they have to live there!
- KirinDave 9y agoPersonally, I think this is like when kids start sticking their tongue through the slit of a Halloween mask until they cut it. It's just something you can choose to stop doing but people can't help themselves.
- exikyut 9y agoI can stare at my CCFL ThinkPad all day, but if I stare away from it at around 75-80° (basically not quite 90°, so say around 2PM on a clock) I can see it flickering away. But if I stare straight-on it's fine; it feels completely steady, and certainly more rock-solid than any CRT. My light emits a (very) tiny amount of light when it's initially turned off. If I stare straight at it I can't see this tiny bit of light at all; I can only see it in my periphery. I suspect my inability to see flickering works by the same mechanism - and I'm very glad for that! Incidentally, when I was using CRTs I had to have them at 85Hz to hide the flickering as much as possible. 60Hz would drive me nuts - but then again, I used 60Hz for several years while using MS-DOS, so I think 85Hz was just a strong preference. This may be interesting to some: https://news.ycombinator.com/item?id=15004608#15005811 https://news.ycombinator.com/item?id=15004608#15005811 (the whole thread, along with the highlighted comment)
- notadoc 9y agoNot sure about the backlighting or a post from 2008, but on the topic of eye strain... the diminutive text sizes and obsession with low contrast throughout the redesigned bleached UI certainly causes me eye strain. I've heard similar complaints from others, and about the new system fonts and anti-aliasing too.
- exikyut 9y agoI wonder if turning on accessibility features would help.
- NateyJay 9y agoThe PWM backlight driver frequency should be much higher. This kind of effect is only perceptible at sub-kilohertz LED switching. The LEDs themselves are happy to be cycled into the megahertz, so the only reason for this on the Macbook is poor electronic design. A low frequency does provide reduced cost, slightly higher efficiency, and reduced auditory/RF noise emissions, but visual effect has to be top priority.
- monochromatic 9y agoYep. I wonder if you give up some small amount of power efficiency at higher frequency, but it shouldn’t be much.
- nukeop 9y agoApple displays are always poor quality.
- KirinDave 9y agoTo be honest, I'm skeptical that this is a universal feature of the MacBook line. I don't own one of my own (I'd never!) but I use one for work and I can see those effects as well if I know how to look at them (I used to have a DLP and it was easy to reproduce the rainbow effect). The flickering on this LEDs is not really any different from the CCFL flickers before.
- pflanze 9y agoI think this probably concerns many more people than are aware of it. I could live with the flickering but I live better by doing what OP did, set screen brightness to max, on all of my laptops and external LCD screens. I then use redshift (I'm on Linux)[1] to dim the screen to the desired brightness, i.e. absorb the excess light in the liquid crystal layer. Sadly this does appear to lead to some loss in brilliance and color quality, but it's not too bad, and I like that I never have to see the flickering. I know someone who puts a foil based filter in front of the screen, that may work somewhat better, I still haven't tried that myself. I find it frustrating how almost all LED lighting installed in the UK is PWM based (if dimmed), or otherwise flickering (AC), too. And it's just a question of consumer expectation: if you buy an LED light bulb in a standard shop in Switzerland, it doesn't flicker, if you buy one in the UK, it does. Both bulbs use the new LED filaments, you can't tell the difference from looking at the bulbs, the difference is in how the power supply in the base of the bulb works. I opened up one of the Swiss bulbs and it had a proper switched-mode power supply (using a switching frequency probably in the 100 KHz range); I saw a video on Youtube by someone who opened up one of the UK ones, and the power supply was based on current limiting via capacitors (and then a rectifier), which leads to a flicker at twice the AC frequency (hence 100 Hz). There's going to be a cost difference of £1 or so, the Swiss consumers are apparently ready to pay for that, the UK population not (or the UK shops possibly pocket the savings). [1] https://en.wikipedia.org/wiki/Redshift_(software) https://en.wikipedia.org/wiki/Redshift_(software) (actually still using the command-line variant of an older version, e.g. "redshift -b 1 -g 0.9:0.9:0.9 -l $POS -t 5500:4800")
- Zak 9y agoA lot of cheap mains-powered LEDs aren't using PWM, but running on mains power directly. You can test whether this is the case using a smartphone camera and an app with manual shutter speed control. If you see scanlines just above and below, but not at 1/50s, your light source is flickering at 50 Hz, which is the AC frequency of UK mains power.
- pflanze 9y ago> A lot of cheap mains-powered LEDs aren't using PWM, but running on mains power directly. Yes, I just added information about that to my comment, sorry for the race condition.
- amelius 9y agoIsn't the solution to simply turn up the frequency of the flickering?
- Zak 9y agoThat would be a solution, however flicker-free dimming for LEDs is not difficult. Linear regulator chips are cheap, but inefficient. Switch-mode power supplies cost a little more. Both are mature technologies any electrical engineer should be familiar with.
- amelius 9y agoNow that you make me think a little deeper about it, it seems simple indeed. The exponential V/I curve of the LED makes I unstable for a given value of V, so all you need to do is have a feedback loop that controls I.
- monochromatic 9y agoLED light output isn’t linear in power input though. PWM allows you to drive the LED in its most efficient regime no matter how much brightness you want.
- Zak 9y agoEfficiency tends to decrease with current. It is rarely more efficient to run higher current and PWM than to simply run lower current. It is, however often easier in terms of circuit design.
- monochromatic 9y agoThat’s interesting, I thought there was an optimal range. Do you have a link with more info?
- Zak 9y agoWell, I can offer an example. This is a test of an LED using a bench power supply. In this test, efficiency drops every time current is increased, without fail. http://budgetlightforum.com/node/51693 http://budgetlightforum.com/node/51693
- alt_f4 9y agoIt is high time for an OLED dispay on the MacBook Pro. And not just on that horrible touchbar gimmick.
- dijit 9y agoOLED has horrible burn in. For phones they’re doing incredible mitigations but the fact is that the screen isn’t on with static elements for 8hours+ solid each day.
- duckfruit 9y agoI'm not so sure that's true. The mitigations they're doing seems to work very well for all sorts of form factors. I've been using a dell UP3017Q OLED monitor as my main display for most of last year and haven't had any issues so far whatsoever. It's simply the best display I've ever used. Even for my LG OLED tv, which I've had for a couple of years hasn't exhibited any image retention issues at all, despite watching a lot of news with scrolling headlines and logos. I wish OLED monitors would become more generally available since they're far, far superior to LCDs but for some reason apart from a limited run of the Dells and some short lived laptop models they're pretty much nonexistent.
- alt_f4 9y agoThere's the ThinkPad X1 Yoga with an OLED display. From what I've heard, the thing is absolutely stunning and a pure joy to code on with a black / dark editor theme. It just emits way less light than the equivalent LCD setup.
- mchahn 9y ago> the screen isn’t on with static elements for 8 hours I have two old cellphones mounted on the wall in my house that show time, weather, control the thermostat, etc. Most of the display is static. After a couple of years the burn-in is dramatic. I was surprised as I thought only phosphors burned.
- Stratoscope 9y ago
- 7ewis 9y agoI use a MacBook Pro all day at work, then at home in the evenings. I can't say I've ever had an issue with eye strain. Over the years I've used many different models too.
- IdontRememberIt 9y agoTo manually check if the PWM has a low frequency: put your finger in front of the screen (or the led lamp you want to test), and move it quickly to describe a paper fan (V). If you see a stroboscopic effect, the frequency is too low. => The screen is not flicker free or the screen brightness too low. This is only a quick test not a bullet proof solution.
- antirez 9y agoJust tested my Macbook Pro (2016 model) with a 120 FPS camera and apparently there is no flickering in the display, however the keyboard backlight appears to use PWM.
- systoll 9y agoSame for 2017. I think a lot of it is down to the usage scenario, but the keyboard is the most obvious ‘flickerer’ I’ve seen... anywhere. A screen like that [or a mandatory keyboard backlight] would be an instant dealbreaker to me.
- derefr 9y agoQuestion: this is a problem because the LED array (as an LED backlight or an OLED display is) all flickers in synchrony, right? Would it still be a problem if each LED in the array was hooked up to its own delay line with a randomized-at-the-factory value?
- monochromatic 9y agoThat would probably help some. Really, they should just flicker faster. There’s no reason not to do PWM at a kHz or 10, and nobody is going to see that flickering.
- CamperBob2 9y agoActually, there is a slight problem, in that many people will be able to hear the inverter. It's tough to make a completely silent inverter that works near the peak of human hearing sensitivity. It can be done, but it's likely to be more expensive. Going all the way to 20 kHz+ is probably the best strategy. LEDs can be driven well into the MHz range, but if you go too high, RF emissions compliance starts to become a problem.
- monochromatic 9y agoThat’s a good point. Call it 50 kHz to deal with people who have abnormal hearing response.