5 ms·
DIY Apodization Filter
- eternauta3k 9y agoTo those like me who are not into photography, this is equivalent to multiplying by a sinc or gaussian before a Fourier transform, to avoid artifacts caused by sharp windows. https://en.wikipedia.org/wiki/Apodization https://en.wikipedia.org/wiki/Apodization
- amelius 9y agoIs there a shop where one can buy lenses, lense tubes, and filters relatively cheaply? And by cheaply I mean under $50 for a lens. I want to experiment with building a custom digital camera for robotics purposes, starting from an image sensor. The quality of the image need not be very high (comparable to a webcam), but the customized lens should allow me to achieve things like magnification and specific focal depth.
- nateroling 9y agoFind a camera store near you and ask if they have any old broken junk to sell you. Most do.
- amelius 9y agoHey thanks for the advice, but I want to be able to reorder lenses if they meet my needs. With old/leftover lenses, that's generally not possible.
- ginko 9y agohttp://www.surplusshed.com/ http://www.surplusshed.com/ might be what you're looking for
- twic 9y agoYou could try looking into C-mount CCTV camera lenses. C-mount is an old standard that is still widely used for technical gear (or at least was back when i was doing microscopy), and is used in (some) CCTV cameras, so there are plenty of cheap but practical lenses for it. I came across it because at one point, there was a vogue for using these lenses with an adaptor on Micro 4/3 cameras. The idea was that you'd just dropped getting on for a thousand pounds on a camera body, so couldn't afford a lens, so you'd buy some thirty quid lens from China and use that. Needless to say, it didn't take people long to realise that was really stupid.
- tesseract 9y ago> I came across it because at one point, there was a vogue for using these lenses with an adaptor on Micro 4/3 cameras. The idea was that you'd just dropped getting on for a thousand pounds on a camera body, so couldn't afford a lens, so you'd buy some thirty quid lens from China and use that. Needless to say, it didn't take people long to realise that was really stupid. I think people were also attracted to adapting those lenses because there are readily available CCTV and machine-vision lenses which are, compared to typical photographic lenses, extremely fast (like f/1.0 and lower). This is for applications like security cameras which need to be able to work in dim lighting conditions, or machine vision applications that require a very short shutter speed. Of course what the Micro 4/3 crowd eventually came to realize is that in order to achieve a fast lens at a modest price point, those lenses trade off other qualities like resolution and distortion, which are less important in their intended applications, but seriously compromise the lens for photography.
- mrob 9y agoI'd like to see lenses with the opposite trade-off: slow (ie. diffraction limited) but excellent optical properties. They'd be ideal for outdoor and long exposure deep focus shots, and it should be possible to make them smaller and lighter than normal lenses. But these lenses seem not to exist despite their potential utility. People focus on low f-number just because it's easy to measure, and assume everybody wants blurred backgrounds. Is there any source for high quality slow lenses?
- ryandamm 9y agoAlibaba. Most other shops will be expensive, occasionally you can find deals on anchor optics clearance (though that info is years old, and to have to know what you're buying!). You're almost always better off buying the cameras and sensors together, unless you have specific needs. Sadly, this isn't something where you can save money by doing it diy. Supply chains are good and overall demand is too high for deals outside the normal channels, I think. Would love to be proven wrong, but I used to pay around with optics regularly and it was always more expensive than I liked. Cutting open photographic lenses was a common way to get fun glass for cheap... So getting cheaper glass is tough.
- brudgers 9y agoEdmund Optics, https://www.edmundoptics.com/ https://www.edmundoptics.com/, is a resource. I don't know about cheaply. But for prototypes with an optical bench, it is probably a reasonable alternative to an exhaustive search among a myriad of suppliers when optimizing for figuring out what you want matters.
- anfractuosity 9y agoNice, I'd never heard of this technique before to create 'smoother' bokeh. Although I have seen some examples of people cutting a shape in card and placing in front of the lens, to create different shaped bokeh, like hearts etc.
- CarVac 9y agoThis works best in lenses that have zero vignetting, like the purpose-designed Minolta/Sony 135 STF and the new FE-mount 100 STF. By comparison, the Fuji 56/1.2R and the Laowa 105/2 with apodization filters lose the effect in the corners where the vignetting cuts off the soft edge of the blur circle.