5 ms·
Another thing I hate about a lot of recent camera hardware is the move toward cheap plastic, everywhere. I shoot pretty much only with old manual-focus lenses
by dheera 9y ago
Another thing I hate about a lot of recent camera hardware is the move toward cheap plastic, everywhere.
I shoot pretty much only with old manual-focus lenses from days of yore. Most of my lenses are older than I am. They're all made of metal, built like a tank, and way easier to use. No fidgety UIs or menus to manipulate, perfectly calibrated infinity focus (slap the focus ring to the end until it stops and landscapes are perfectly sharp 100% of the time), rock-solid, don't break under pressure inside my bag, and they just work, no questions asked.
Totally agree about the lack of Arca-Swiss adoption by camera manufacturers. Camera bodies and heavy lenses could easily have a built-in Arca-Swiss shape at the bottom and still have a 1/4-20" screw hole for people who need it.
- gt_ 9y agoConcerning arca mount, I would prefer the camera without it. I wouldn't want the extra bulk when using no mount. I'm not seeing the problem with screwing a mount plate on and leaving it there. If you really want it to be permanent, get some Super Glue. Modular design in camera equipment makes for compatibility, adaptability, reusability, etc. On this note, I am a professional photographer and have worked professionally with any form of digital, video, emulsion movie or still camera on the market and never have seen rubber on the bottom of a camera that i can remember. Maybe some have it but it's always on the plate if anything in my experience. Screw mount is lame design I agree but arca mount is not at all a replacement for it. It's a different mount option, which itself requires a modular attachment solution which the screw mount is.
- stan_rogers 9y agoThe Arca Swiss mount isn't even among the best quick-release plate systems, when it comes down to it. You could argue for a long plate back in the days when lenses were mostly unit-focus and the CG would shift; these days with just about everything being internal focus, a fully-captured plate is an immensely better solution than a dovetail plate (hopefully) captured with clamping pressure in one dimension. As for the GP' complaint about plastics, it just shows that there's no experience there with minor dents requiring major repairs that would have been harmless bounces with a filled polycarbonate. Probably never dealt much with focus shifts or lens element alignment problems in severe heat or cold either. They use appropriate plastics on the pro-grade stuff where they use it because it's better, not because it's cheaper.
- thinkMOAR 9y agoAt the time that was my deciding factor picking between canon rebel something vs nikon d80 (2006, when it was brand new). Photo quality-wise they were so well matched, until i read a review where the author said, the canon is plastic and the nikon metal and the metal makes you feel you have a real tool in your hands instead of toy. (also i'm not the most careful person metal stronger then plastic, typically)
- bryanlarsen 9y agoGiven that you're often hand holding a camera, being lighter is a significant advantage, it can often be the difference between a stable or a blurred shot. And good plastics are plastic in the traditional sense of the word: if you drop them, they'll absorb the force by deforming and then spring back into place. Metals deform permanently. In a car that's an advantage, you can just hammer it back into place. With a precision instrument a bent tool is just as bad as a broken one. I don't know how a Rebel compares against a Nikon in a drop test -- I've dropped my Rebel without issues, but no major drops, luckily. But I can compare the pre-unibody MacBook Pros with Thinkpads from the same era. In the store, the original MacBook Pros felt and looked a lot more solid, but they were really crappy cases. OTOH, the ThinkPad's were tanks. Their plastic cases had a magnesium frame, giving them the best of both worlds. Of course, once Apple switched to unibody and ThinkPad's have started to compromise to compete on thickness the story hasn't been so clear.
- thinkMOAR 9y agoThat's true an over years read many people that dropped their canon rebel and they were surprised it didn't shatter into a million pieces and often still worked as good as before. Some brought it to service centers just to be sure. I never dropped my camera though, but i do run into things a lot, doors, doorposts, fences and most of all tiny people. Though with a bit typical lens 70-200 or some people often bring, i doubt the difference in weight of the body plastic vs metal is really noticeable. (plastic rebel XTi 556 grams vs 668 grams metal nikon d80)
- 9y ago
- rangibaby 9y ago> I shoot pretty much only with old manual-focus lenses from days of yore. Most of my lenses are older than I am. They're all made of metal, built like a tank, and way easier to use. No fidgety UIs or menus to manipulate, perfectly calibrated infinity focus (slap the focus ring to the end until it stops and landscapes are perfectly sharp 100% of the time), rock-solid, don't break under pressure inside my bag, and they just work, no questions asked. This is what I love about the Asahi Pentax Spotmatic-era cameras. The only dial on the camera sets shutter speed and the sensitivity of the light meter. If you go out on a nice day and practice shooting with "sunny 16" technique you don't even need a light meter, just set your aperture and shutter speed and get creative.
- jfindley 9y agoOn pro cameras, at least, although they have plastic outsides it's pretty strong plastic, and the actual chassis of the camera is cast alloy (usually magnesium-aluminium). A nikon D3/D4/D5 will withstand a huge amount of abuse - at least as much as my more obviously metal pre-digital SLRs did. Another issue to be aware of is when using large, heavy lenses, a lot of stress gets put on the mount point and that most modern pro-orientated DSLRs are actually stronger than their old film equivalents in this regard, as the engineering has improved over time. Re: arca-swiss plates - the reason camera companies don't do this is because of the licensing fee (source: I've talked to a bunch of them, and this is always their reply). I'm sure Thom is aware of this, but the licensing fee is not insignificant, and with extreme pressure to control costs it's not surprising that companies very rarely do this. Of course I personally would be very happy to see them included, but I know there are a bunch of people that don't use them, and would resent the extra cost to include them.
- matwood 9y agoMy D7100 is pretty tough and fairly new. My issue now is the weight. If I carry the D7100, 70-300, and wide angle it's a lot of weight to lug around. I do it because it takes amazing pictures, but I'm not going to pretend I like the weight.