5 ms·

Brother to replace AA & AAA with shake-to-wake batteries

110 points by ukdm 16y ago

ovi256 16y ago
I had a shake-to-charge flashlight once. The movement to charge it would get you arrested for indecent exposure in the South of the US. OTOH, But it worked beautifully, and, yeah, no batteries needed.
- RyanMcGreal 16y ago
  I have a crank-to-charge flashlight and I love it. Thirty cranks will run the flashlight a good ten minutes or so.
- kragen 16y ago
  I'm guessing these batteries are the same thing. The shake-to-charge flashlights appear to be a long tube with a coil of wire wrapped around it at the middle, with a permanent magnet with soft bumpers able to slide up and down the tube. You can feel the bump when the magnetic field hits the coil; I'm guessing that the rest of the circuitry consists of a bridge rectifier and a capacitor. (And an LED, of course.) Presumably in the "battery", the LED is replaced with a power supply that can boost 0.8V or whatever up to 1.5V, or reduce 2V down to 1.5V when needed.
  - ja27 16y ago
    Make your own mini shake light: http://www.instructables.com/id/Shake-it-like-a-Tic-Tac!/ http://www.instructables.com/id/Shake-it-like-a-Tic-Tac!/
brianbreslin 16y ago
this is clever. but the question becomes how much does it need to be shaken. if its just a few shakes, cool. if its tons of shaking to change channels, people will get annoyed (remember, people are lazy as f#$k)
- barredo 16y ago
  Hung the remote to an elastic cord, shake it, and let physics do their work.
someone_here 16y ago
It would be nice if remotes were solar charged, like pocket calculators.
- subwindow 16y ago
  I thought this was a terrible idea at first, because a significant portion of television viewing time is spent at night time. However, if the cells were on the front of the remote and were good enough that they could power it based upon only the glow from the TV, that would be great. You're already pointing the remote that direction.
  - someone_here 16y ago
    And it would be charging all the time, too, not just when you're using it.
  - brianbreslin 16y ago
    do pocket calculators work in that level of lighting?
Kliment 16y ago
Sounds well-suited for the Wii controller. It's like shake to reload in old arcade games.
- secretasiandan 16y ago
  I would imagine that it won't generate enough power for a Wii controller. At the very least it would be bad user experience if for some reason your ability to interact with the game occasionally dropped out because you weren't in a 'vigorous' enough part of the game. The wii controller is constantly using (relatively) large amounts energy to measure/process/send sensor data for however long you play. A remote on the other hand is intermittently transmitting short messages. My guess is that a large amount of the energy dissipated in the remote batteries is self-discharge, which makes putting a normal battery in one a little bit of a waste.
  - Kliment 16y ago
    Looking at the power consumption of the various components in the Wiimote, the only thing that really eats a lot of energy is the radio. Data is not processed on the Wiimote. Looking at the data stream coming out, the only processed data is the camera at the front, which does it super-efficiently in an ASIC/DSP. Maybe a supercapacitor or normal battery in addition to one of those could store energy from the vigorous parts and allow for unbroken interaction. Games are already designed to pause on battery low, so it would not be critical, just annoying.
    - axod 16y ago
      * Loudspeaker * Vibration Those 2 functions in the wiimote eat battery.
      - blasdel 16y ago
        Sure, if they were in constant use, but they're used pretty sparingly. The bluetooth radio is on whenever the game hasn't been paused for a few minutes, and that dominates the power usage.
ollysb 16y ago
Love it, how many times have you seen someone shaking and hitting something in a vain attempt to make it work?
adolph 16y ago
So this turns anything battery powered into a shake-weight? Cultural reference point (maybe not safe for your work): http://www.hulu.com/watch/143264/saturday-night-live-shake-weight-dvd http://www.hulu.com/watch/143264/saturday-night-live-shake-w...
r3570r3 16y ago
I think it will be very effective. However, the control options will be limited with a shake operation. Though, the innovative thinking needs a hats off..
subwindow 16y ago
That sounds very useful, but what's the price? I doubt it will catch on if it is $10 per "battery".
- moe 16y ago
  If that battery never needs replacement I would pay even more than $10 for it. (And assuming it has a reasonable shake/runtime ratio)
DirtyAndy 16y ago
If they can produce this cheaply enough and if it doesn't need too much shaking to make it work it could revolutionize children's toys. A lot of kids carry around their toys a lot in comparison to the amount of time the electrical parts are actually in use, so there should be ample charging time. Lots of toys only need their batteries replacing every six months to a year, so I assume they are fairly low drain and would suit this well. Edit: Battery compartments that children cannot get into a also no doubt a part of the manufacturing cost, so batteries that never need replacing that can truly be built into the toy wouldn't need battery compartments and could simplify design.
blhack 16y ago
YES! I was just thinking of something like this last night for things like car-key transmitters and the like. Lots of stuff (like remotes) sits around not being used except for a few seconds every couple of hours (or days). Really awesome, good job, Brother.
apinstein 16y ago
I have been using Eneloop rechargeable batteries in my remotes for almost a year now. It's pretty awesome. Unlike NiMH or Li-Ion, they still have ~80%+ of their life after being charged and left on a shelf for 6 months. So they are a perfect application for this type of thing. Only downside is that they're 1.2v and don't have enough power for some applications (like my lighted & battery-powered pepper mill. It was a gift.). The shake&wake batteries are still awesome! I would love to have them. But Eneloop is here now, and very cost-effective.
- tzs 16y ago
  Non-rechargeable 1.5v batteries only start at 1.5v. As you use them up, the voltage drops, going down to about 1v just before the battery poops out. The curve is not linear. These batteries are down to 1.2v around 30-50% of the way through their life. The rechargeable batteries start around 1.2v, but their discharge curve is much more level. They stay near 1.2v right up to the end. If a device has trouble with rechargeable batteries because of the voltage, that device is also going to have problems with non-rechargeables, as the non-rechargeables spend at least half their service life below 1.2v. There are some good graphs showing discharge curves here: http://www.powerstream.com/AA-tests.htm http://www.powerstream.com/AA-tests.htm The rechargeable batteries can confuse battery meters on some devices, though. If the device assumes non-rechargeable batteries, and then tries to estimate remaining battery by comparing the voltage to a typical non-rechanrgeable discharge curve, and you put rechargeable batteries in, the device is going to think they are starting out at 50-80%, and then is going to think they are draining very very slowly.
  - apinstein 16y ago
    It's a good point, but in practice I have found some devices won't even power on with the 1.2v batteries. A good example being the Microsoft Bluetooth Mobile Keyboard 6000. The batteries don't last for 5 minutes even. Alkaline batteries last for months.
pbhjpbhj 16y ago
Is anyone else thinking that they could pair these with teenage boys with fleshlights and power the planet?
deleted 16y ago
[deleted]
sbierwagen 16y ago
I'm not sure how practical this will be. The magnet in a shake-light is large, and the coil probably has at least a hundred turns of wire. A magnet and coil that can fit into a battery is going to be much smaller-- and then you still have to fit in the rectifier and capacitor. All of this in the AAA form factor? Implausible.
- ja27 16y ago
  Not really. You can see a smaller homemade version of the shake light here: http://www.instructables.com/id/Shake-it-like-a-Tic-Tac!/ http://www.instructables.com/id/Shake-it-like-a-Tic-Tac!/ That could almost fit in a AAA. The capacitor or battery would be the largest part after the magnet/coil mechanism.
dpcan 16y ago
Tesla should put these in the shocks of their cars and they could self charge as you bounce down the road :)
thinker 16y ago
We did this for one of our university design projects (back in 2007). With a rudimentary prototype we created in a couple months, we were able to charge an LED light for a second after 30 seconds of shaking the battery. So what I'd like to know for this is the same thing, how long would I have to shake the remote to get a single button push?
- thinker 16y ago
  Found our poster for this project: http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs031.ash2/34894_1544343691951_1335774917_1451059_3113184_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs031.ash2/34894...
jayliew 16y ago
I got 2 free samples AA batteries from http://www.USBcell.com http://www.USBcell.com in 2007 during their demo (at DEMO), and I've been using them ever since to this date with my wireless Microsoft mouse. I found out that my mouse will work with just 1 AA, so while one is being used, I stick the other in the USB drive (to charge), and I just swap when the one in the mouse runs out. And it's been 3 years!!! No shaking required. Whenever I replace the AA from my mouse with the one I just unplugged from the USB drive, I time how fast I can "reload" <-- used to play Time Crisis 1 and 2 obsessively back in high school :D

110 points by ukdm 16y ago

I had a shake-to-charge flashlight once. The movement to charge it would get you arrested for indecent exposure in the South of the US. OTOH, But it worked beautifully, and, yeah, no batteries needed.

RyanMcGreal 16y ago
I have a crank-to-charge flashlight and I love it. Thirty cranks will run the flashlight a good ten minutes or so.
kragen 16y ago
I'm guessing these batteries are the same thing. The shake-to-charge flashlights appear to be a long tube with a coil of wire wrapped around it at the middle, with a permanent magnet with soft bumpers able to slide up and down the tube. You can feel the bump when the magnetic field hits the coil; I'm guessing that the rest of the circuitry consists of a bridge rectifier and a capacitor. (And an LED, of course.) Presumably in the "battery", the LED is replaced with a power supply that can boost 0.8V or whatever up to 1.5V, or reduce 2V down to 1.5V when needed.
- ja27 16y ago
  Make your own mini shake light: http://www.instructables.com/id/Shake-it-like-a-Tic-Tac!/ http://www.instructables.com/id/Shake-it-like-a-Tic-Tac!/

brianbreslin 16y ago

this is clever. but the question becomes how much does it need to be shaken. if its just a few shakes, cool. if its tons of shaking to change channels, people will get annoyed (remember, people are lazy as f#$k)

barredo 16y ago
Hung the remote to an elastic cord, shake it, and let physics do their work.

someone_here 16y ago

It would be nice if remotes were solar charged, like pocket calculators.

subwindow 16y ago
I thought this was a terrible idea at first, because a significant portion of television viewing time is spent at night time. However, if the cells were on the front of the remote and were good enough that they could power it based upon only the glow from the TV, that would be great. You're already pointing the remote that direction.
- someone_here 16y ago
  And it would be charging all the time, too, not just when you're using it.
- brianbreslin 16y ago
  do pocket calculators work in that level of lighting?

Kliment 16y ago

Sounds well-suited for the Wii controller. It's like shake to reload in old arcade games.

secretasiandan 16y ago
I would imagine that it won't generate enough power for a Wii controller. At the very least it would be bad user experience if for some reason your ability to interact with the game occasionally dropped out because you weren't in a 'vigorous' enough part of the game. The wii controller is constantly using (relatively) large amounts energy to measure/process/send sensor data for however long you play. A remote on the other hand is intermittently transmitting short messages. My guess is that a large amount of the energy dissipated in the remote batteries is self-discharge, which makes putting a normal battery in one a little bit of a waste.
- Kliment 16y ago
  Looking at the power consumption of the various components in the Wiimote, the only thing that really eats a lot of energy is the radio. Data is not processed on the Wiimote. Looking at the data stream coming out, the only processed data is the camera at the front, which does it super-efficiently in an ASIC/DSP. Maybe a supercapacitor or normal battery in addition to one of those could store energy from the vigorous parts and allow for unbroken interaction. Games are already designed to pause on battery low, so it would not be critical, just annoying.
  - axod 16y ago
    * Loudspeaker * Vibration Those 2 functions in the wiimote eat battery.
    - blasdel 16y ago
      Sure, if they were in constant use, but they're used pretty sparingly. The bluetooth radio is on whenever the game hasn't been paused for a few minutes, and that dominates the power usage.

ollysb 16y ago

Love it, how many times have you seen someone shaking and hitting something in a vain attempt to make it work?

adolph 16y ago

So this turns anything battery powered into a shake-weight? Cultural reference point (maybe not safe for your work): http://www.hulu.com/watch/143264/saturday-night-live-shake-weight-dvd http://www.hulu.com/watch/143264/saturday-night-live-shake-w...

r3570r3 16y ago

I think it will be very effective. However, the control options will be limited with a shake operation. Though, the innovative thinking needs a hats off..

subwindow 16y ago

That sounds very useful, but what's the price? I doubt it will catch on if it is $10 per "battery".

moe 16y ago
If that battery never needs replacement I would pay even more than $10 for it. (And assuming it has a reasonable shake/runtime ratio)

DirtyAndy 16y ago

If they can produce this cheaply enough and if it doesn't need too much shaking to make it work it could revolutionize children's toys. A lot of kids carry around their toys a lot in comparison to the amount of time the electrical parts are actually in use, so there should be ample charging time. Lots of toys only need their batteries replacing every six months to a year, so I assume they are fairly low drain and would suit this well. Edit: Battery compartments that children cannot get into a also no doubt a part of the manufacturing cost, so batteries that never need replacing that can truly be built into the toy wouldn't need battery compartments and could simplify design.

blhack 16y ago

YES! I was just thinking of something like this last night for things like car-key transmitters and the like. Lots of stuff (like remotes) sits around not being used except for a few seconds every couple of hours (or days). Really awesome, good job, Brother.

apinstein 16y ago

I have been using Eneloop rechargeable batteries in my remotes for almost a year now. It's pretty awesome. Unlike NiMH or Li-Ion, they still have ~80%+ of their life after being charged and left on a shelf for 6 months. So they are a perfect application for this type of thing. Only downside is that they're 1.2v and don't have enough power for some applications (like my lighted & battery-powered pepper mill. It was a gift.). The shake&wake batteries are still awesome! I would love to have them. But Eneloop is here now, and very cost-effective.

tzs 16y ago
Non-rechargeable 1.5v batteries only start at 1.5v. As you use them up, the voltage drops, going down to about 1v just before the battery poops out. The curve is not linear. These batteries are down to 1.2v around 30-50% of the way through their life. The rechargeable batteries start around 1.2v, but their discharge curve is much more level. They stay near 1.2v right up to the end. If a device has trouble with rechargeable batteries because of the voltage, that device is also going to have problems with non-rechargeables, as the non-rechargeables spend at least half their service life below 1.2v. There are some good graphs showing discharge curves here: http://www.powerstream.com/AA-tests.htm http://www.powerstream.com/AA-tests.htm The rechargeable batteries can confuse battery meters on some devices, though. If the device assumes non-rechargeable batteries, and then tries to estimate remaining battery by comparing the voltage to a typical non-rechanrgeable discharge curve, and you put rechargeable batteries in, the device is going to think they are starting out at 50-80%, and then is going to think they are draining very very slowly.
- apinstein 16y ago
  It's a good point, but in practice I have found some devices won't even power on with the 1.2v batteries. A good example being the Microsoft Bluetooth Mobile Keyboard 6000. The batteries don't last for 5 minutes even. Alkaline batteries last for months.

pbhjpbhj 16y ago

Is anyone else thinking that they could pair these with teenage boys with fleshlights and power the planet?

deleted 16y ago

[deleted]

sbierwagen 16y ago

I'm not sure how practical this will be. The magnet in a shake-light is large, and the coil probably has at least a hundred turns of wire. A magnet and coil that can fit into a battery is going to be much smaller-- and then you still have to fit in the rectifier and capacitor. All of this in the AAA form factor? Implausible.

ja27 16y ago
Not really. You can see a smaller homemade version of the shake light here: http://www.instructables.com/id/Shake-it-like-a-Tic-Tac!/ http://www.instructables.com/id/Shake-it-like-a-Tic-Tac!/ That could almost fit in a AAA. The capacitor or battery would be the largest part after the magnet/coil mechanism.

dpcan 16y ago

Tesla should put these in the shocks of their cars and they could self charge as you bounce down the road :)

thinker 16y ago

We did this for one of our university design projects (back in 2007). With a rudimentary prototype we created in a couple months, we were able to charge an LED light for a second after 30 seconds of shaking the battery. So what I'd like to know for this is the same thing, how long would I have to shake the remote to get a single button push?

thinker 16y ago
Found our poster for this project: http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs031.ash2/34894_1544343691951_1335774917_1451059_3113184_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs031.ash2/34894...

jayliew 16y ago

I got 2 free samples AA batteries from http://www.USBcell.com http://www.USBcell.com in 2007 during their demo (at DEMO), and I've been using them ever since to this date with my wireless Microsoft mouse. I found out that my mouse will work with just 1 AA, so while one is being used, I stick the other in the USB drive (to charge), and I just swap when the one in the mouse runs out. And it's been 3 years!!! No shaking required. Whenever I replace the AA from my mouse with the one I just unplugged from the USB drive, I time how fast I can "reload" <-- used to play Time Crisis 1 and 2 obsessively back in high school :D