4 ms·
I performed brain surgery on my CPU to lower its temperature 15 degrees
- ouid 9y agothis doesn't feel like it is any more than an advertisement.
- jandrese 9y agoAren't you feeling the need to rush out and buy the $50 doohicky that replaces the simple razor blade?
- yeezul 9y agoFor someone who doesn't really game nor overlock CPUs, why doesn't CPU manufacturers use the same technique out of the box?
- prions 9y agoI'd say cost. All the author did was remove the cpu lid and replace the cheaper thermal paste with a better after market brand.
- artimaeis 9y agoIntel hasn't spoken about why they use the thermal interface material (TIM) they continue to use. Best guess anyone has is that there's a higher cost somehow with a soldered lid. I'm not completely sold on that, but Intel hasn't defended their practice in any way so it's open to interpretation.
- bittermang 9y agoCorrect me if I'm wrong, but wasn't the use of solder the central issue to first generation Xbox 360's famous Red Ring of Death? The solder would fail and the machine would refuse to boot.
- arielweisberg 9y agoThat wasn't for interfacing with the heat spreader it was soldering the actual data pins.
- mcraiha 9y agoIf you mean liquid metal vs. paste, then the answer is money. Liquid metal is more expensive and harder to apply. If you mean solder vs. paste then "Micro cracks in solder preforms can damage the CPU permanently after a certain amount of thermal cycles and time. Conventional thermal paste doesn’t perform as good as the solder preform but it should have a longer durability – especially for small size DIE CPUs." http://overclocking.guide/the-truth-about-cpu-soldering/ http://overclocking.guide/the-truth-about-cpu-soldering/
- jandrese 9y agoThermal paste is difficult to apply at large scale. It's cheaper and easier to use the thermal pads, even though they kind of suck. This is also why the stock cooler that came with your CPU came with one of those stupid pads. The alternative is to use the paste and end up with the shitshow that was the nVidia 8000 series GPU debacle. People pulling them apart were uniformly aghast at the quality of the paste job, usually with big blobs of the stuff smeared all around the chips.
- mcraiha 9y agoTitle is pure clickbait. Delidding is super easy with right tools, brain surgery is not easy.
- Kenji 9y agoMaybe one day brain surgery will be super easy with the right tools. But yes, I somehow expected the article being about someone who fixed the silicon or something crazy like that.
- SAI_Peregrinus 9y agoThat would take a FIB (Focused Ion Beam) workstation. Very expensive. Christopher Tarnovsky has one and has used it to hack a bunch of TPM chips and smart cards. It's very impressive, especially since some of what he does is done while the chip is powered on... Delidding isn't brain surgery. Removing and bypassing (depositing new metal to form wires / cutting old connections with the ion beam) a mesh, then probing and decrypting the data bus is much closer. And even then, if you mess up you grab a new chip, with brain surgery you can't just get another patient. As someone who's had brain surgery, I'm very, very glad brain surgeons don't often mess up!
- dave_sullivan 9y agoI once fixed a bent pin in a socket 775 motherboard's CPU slot by bending it back with a knife. I was pretty sure I'd break the board, but it worked!
- bbatha 9y agoThe tip of a mechanical pencil with the graphite retracted is the perfect size for fixing bent pins.
- shalmanese 9y agoWhy put the IHS back on? Surely heatsink directly in contact with the CPU would result in better cooling than going through another thermal interface?