4 ms·
Are they really running a DC->AC inverter, and then plugging SMPS AC->DC converters into it?
by Scoundreller 9y ago
Are they really running a DC->AC inverter, and then plugging SMPS AC->DC converters into it?
- notatoad 9y agoit's not efficient, but who cares? using the bricks that come with your equipment and parts you can get at the hardware store solves problems quickly
- y04nn 9y agoA simple DC-DC converter from ebay would do the trick a save you a lot of space and money.
- mcguire 9y agoWould that handle the noise and transients in an automotive electrical system?
- mschuster91 9y agoEspecially the transients are a problem. IIRC certified-for-automotive parts have to endure >100V input, which e.g. may happen when the battery connection is flaky and the engine is running, due to the sudden load drop. What's missing on this setup imho is a) a solid power connection (those 12V sockets are known for being loose because of wildly varying manufactoring tolerance) and b) the lack of a supercap+diode setup to prevent brownouts during engine start.
- myself248 9y agoThe vast majority of aftermarket electronics won't survive a load-dump transient. This includes every AC inverter, every USB charger, every laptop PSU, whatever you find at the store. Most 12v-targeted electronics are good to about 30v transients. The DC-DC converters would likely be no more or less susceptible than the DC-AC inverter used here. Just quieter, smaller, and more efficient.
- boxcardavin 9y agoMultiple stable 2.5amp sources for a Pi and other devices is important and not always reliable with many 12v->5v converters or even with (how I would probably do it) with a power bank that acts as a buffer and is charged via 12v. It's messy but it works, if that bothers you then you should read about how inefficient compilers can be.
- flamedoge 9y agocompilers are pretty dumb, but it's inching towards perfection every second.
- zkms 9y agoThis is a data-acquisition tool made by academics that lives in an environment (hybrid passenger automobile) where some extra weight and some conversion loss is utterly fine. What matters here is reliability -- the device runs without being attended, and needs to keep working otherwise data gets lost / doesn't get collected. These researchers don't really have the inclination to faff around with designing a DC-DC converter system, they're trying to study IMSI catchers! Were this to be made an actual polished product or deployed in an environment (like in a UAV) where weight/loss matters, I'm sure that someone could design a DC-DC conversion system that's tolerant of the nasty transients on automobile 12V bus and also supplies all needed voltages, without any needless conversions.