4 ms·
Spellchecking? What about innumeracy? As you can see if you only drain your battery to 75% (meaning you only use 20% of your capacity) you get tremendously mor
by stcredzero 11y ago
Spellchecking? What about innumeracy?
As you can see if you only drain your battery to 75% (meaning you only use 20% of your capacity) you get tremendously more cycle’s (more than double!) then say using 50%. So when systems are designed for energy storage you generally want your batteries to last a long time (since they’re expensive) so you want the maximum amount of cycles for them, which means that you should only discharge them 80%. As you can see this is getting quite frustrating, as now simply to power you’re off-grid system at night you need to purchase 80% more battery capacity than you actually need.
75 + 20 = 95. Okay, close enough to 100. But discharging to only 20% means you need to buy 500% the capacity, not 180%!
- aswanson 11y agoYeah, I was hesitant to click on the article based on the title. Thanks for confirming my suspicions.
- Fjolsvith 11y agoI did learn a few things from the article, though. The big one has to do with why the car batteries I use on a hydraulic and winch system have been failing fast. It has to do with the way I run them all the way down before charging them back up. In my shed delivery business, I have a custom designed trailer with a hydraulic lift for the tilt bed and a winch for loading and unloading the buildings. They are 12 volt and I just run them with a car battery.
- Dylan16807 11y agoPlus, getting 2100 cycles at 75% vs. 1000 cycles at 50% is barely an improvement at all. With this particular example battery there is absolutely no reason not to discharge it completely. You get roughly the same number of watt hours before it dies, no matter what you do.