5 ms·
How I Designed a Compact Weatherproof Raspberry Pi Camera Case
- vegabook 11y agoThis is brilliant - you can then pipe the video into say a TK1 and do some "danger recognition" outside your doorstep (or family recognition). The only issue is, it appears the usb cable can be pulled out easily, just a tug downward?
- ksb214 11y agoThank you for the feedback. I will keep this in mind for the next version.
- JohnyLy 11y agoSo cool and so clever. It's well explained and it looks so easy. It proves that you don't always need great instruments/material to make something awesome. In your case, you didn't need to get a weatherproof inspection machine, you did your inspection by yourself. Congrats!
- ksb214 11y agoThank you very much for the feedback.
- leoedin 11y agoI wonder what CAD software they used. It's crazy how easy this is now that 3D printers are so readily available. I guess the other option would have been to have it made on a CNC mill?
- ksb214 11y agoFusion 360
- DanBC 11y agoThat's a nice looking case! I love these posts where someone talks through how they tackle something that's new to them. I didn't see any silica gel bags in there. Are you going to check it for condensation in a few months? You may want to consider a suitable grease for the seals. Silicone O rings are nice, and you can get silicone grease for them. If there is a lot of temperature change (night & day; summer and winter) you might want to consider a conformal coating. (I used to build machinery that would go down coal mines. These devices were in hostile conditions. Each machine was expensive, and the machines they controlled were expensive, and lost production was expensive, and there are human lives involved, so failure was not wanted, so I tend to go a bit over the top with this stuff.)
- aunty_helen 11y agoI'm not sure if it would be enough heat to keep it completely dry but from my experience running motion on a Pi B, the CPU can get up to 70degC on a 30degC day and I haven't seen it below 33degC which occurred on a -5degC night. This is with a standard ebay Pi case, however.
- jacquesm 11y agoAnother good way to deal with condensation is to have a small resistor based heater in the case.
- radiorental 11y agoOr the RPi cpu should do, right?
- cdnsteve 11y agoThis is really great. I've never actually read up on anyone building something that they had 3D printed. Nice work.
- ksb214 11y agoThank you and I am glad that you liked the post.
- baseballmerpeak 11y agoI like it, but one thing stood out to me. Sharp corners in the path of a non-moulded seal can cause leakage and premature failure. I recommend that each of the four walls not terminate in a sharp corner with the round, but a small radius. Then the seal could make more gentle bends in front of the holes, instead of wrapping around them, taking an octagonal path around the part. Also, those deep corners are not readily CNC machinable, if you ever wanted to go that route.
- rufugee 11y agoDo good night vision cameras exist for the pi which would work with this? I use a number of cameras with zoneminder but will soon be replacing a few...a pi-based system would be great if night vision support was baked in.
- ryandrake 11y agoCool project--I just stuck mine in a Pelican case with a few holes/grommets for the wiring.
- sandworm101 11y agoA great case, but I think it's beyond weatherproof and into the realm of waterproof or immersible. A weatherproof enclosure need not be sealed to such an extent. And there is an upside to not sealing. If you plan that water will somehow get in, say by including a drain hole on the 'down' side, then the inevitable crack or other slow leak won't result in catastrophic flooding.
- ksb214 11y agoThank you for sharing my post here and all the great feedback.