madengr

87 ms·

121.
by madengr 5y ago
1000/40 is $270/month here in USA. Fortunately Google Fiber just dug up the neighborhood so hopefully I’ll have 2000/1000 before the end of the year, for 1/2 that cost.
122.
by madengr 5y ago
We did the same in my EE program, though we were allowed to use a ROM for the microcode and some 8-bit registers from the TTL family. I never had time to build it either as it’s too much for a single semester class.
123.
by madengr 5y ago
More accuracy may be better, but I’d like to see a quick method of extracting analytic geometry from a 3D scan. We have laser scanners and Faro arms at work, and in the end it’s a person manually entering the geometry into Solidworks as the
124.
by madengr 5y ago
This is why I only do chips with one transistor, but it’s a very expensive transistor.
125.
by madengr 5y ago
I’d be all over that HT if they would enable DMR. It has all the hardware to do it, and you’d get Kenwood quality in a DMR. Right now I have an Anytone (Chinese crap) for DMR and Yeasu for Fusion.
126.
by madengr 5y ago
Several radios have built in APRS messaging, but it’s extremely frustrating to use as non have implemented predictive text entry. That said, the SX1276 covers both 2m and 70cm, and has FSK mode, so this project has the hardware to do APRS,
127.
by madengr 5y ago
I recently put in a 36 kW (125 kBTU/hr) wok burner, outdoors of course. It’s insane how hot it gets. https://youtu.be/O-Y5XJwBPvw
128.
by madengr 5y ago
No, they have a harness called Caravan that has no I/O buffers. I calculated Ft=65 GHz on this process and have a 1-15 GHz amp working in simulation (pre-extraction), though I don’t know if I’ll have time to apply for the next run.
129.
by madengr 5y ago
Could be worse. Check out this hog composting: https://youtu.be/U9kw0A9_oCM
130.
by madengr 5y ago
I design RF/Microwave hardware. The issue is the long term reliability, specifically the semiconductor lifetime drops drastically with temperature, not to mention the passive components. The temp cycling may be more of an issue, as I
131.
by madengr 5y ago
LTCC has used screen printing of conductive pastes for decades. https://en.m.wikipedia.org/wiki/Co-fired_ceramic
132.
by madengr 5y ago
I agree. I had two weeks off between grad school and my current job. I’ve been maxing out my 401k for 25 years and have zero debt (mortgage paid off 2 years ago). Could actually retire now at 49.
133.
by madengr 5y ago
Sounds like my employer, and I’ve been on-site for 1 year. Their excuse for 2% raises was that the economy was bad, despite record earnings and productivity during the pandemic. Now that inflation is 5%, I’m gone with another 2% raise.
134.
by madengr 5y ago
They didn’t “make” anything, though perhaps when they sell they will make some money, unless everyone else decides to sell at the same time. It’s just a game of musical chairs. They only one making anything is the federal reserve; they ar
135.
by madengr 5y ago
Here here. I was looking just yesterday to see if a John Deere Gator (or equivalent) is street legal. The answer is yes, with a few parts. https://www.sidebysidestuff.com/john-deere-gator-utility-str... I want my 87’ Toyo
136.
by madengr 5y ago
Wouldn’t these things, like quantum computers, be leased? The complexity is getting so high that you would need full time staff dedicated just to that hardware. At least if it goes belly up, you are not stuck with unsupported hardware.
137.
by madengr 5y ago
Since the amplifier has both voltage and current input noise sources, there is an optimum source impedance that provides a minimum noise figure, and it’s not an impedance match. This is called a minimum noise match, along with associated n
138.
by madengr 5y ago
I’ve had 3 Brother printers on Linux with zero issues. They work immediately with the standard Fedora printer setup.
139.
by madengr 5y ago
They probably don’t have the manpower. The Asian countries produce hardware engineers at 10x that of the west, and with a much larger population, have a vast talent pool.
140.
by madengr 5y ago
Altium is definitely mid-range on the price point. Mentor and Cadence are 10x.
141.
by madengr 5y ago
There are CAD companies that sell for far less that have much more complex software.
142.
by madengr 5y ago
The nice thing about Altium is that they also cater to low profile customers, like me. I have been using it for 27 years, and if Autodesk buys it, it may turn to shit; probably some cloud BS, which is the way things are going.
143.
by madengr 5y ago
Ha ha, sounds like my DSP class in grad school. 27 Asians and three white guys.
144.
by madengr 5y ago
They should send 0.2 ns long random bits through it, see if they get the data faster than light out the other end. Me thinks that won’t work.
145.
by madengr 5y ago
You do realize the average lifespan is about 80, and people have kids in their 20/30s, which puts the typical age of inheritance in the 50/60s, who themselves are already near retirement age. It’s not as if you have a bunch of 18
146.
by madengr 5y ago
Costco is like Sam’s Club, but without the tattoos.
147.
by madengr 5y ago
I’m still paying for Altium. Last time I tried KiCAD I couldn’t assign a net to arbitrary polygons, which is critical for RF work. It still has a ways to go to catch up with Altium, which is $2k/year maintenance.
148.
by madengr 5y ago
We had higher billable hours during the summer lockdown than ever, though they still came up with the excuse for 2% raises; “well the economy is not good”.
149.
by madengr 5y ago
I have designed some satellite microwave PA, and the thermal ranges were -20C to +70C, but yes, not even an industrial temperature range. The biggest issue is getting heat out, though my module was on a cold plate and I doubt it was ever cy
150.
by madengr 5y ago
I doubt it in the USA. Digital radio has been around for a while, but has never taken off. I hope it stays that way. One could hack together a DAB to FM converter that gangs onto the radio dial for tuning.

More ›