3 ms·
Moore's law ending just means progress will slow, not cease. But in addition to that there are other things we could optimize. For example a lot of transistor
by the8472 11y ago
Moore's law ending just means progress will slow, not cease.
But in addition to that there are other things we could optimize. For example a lot of transistor budget is spent on caches and very clever out of order execution. If memory bandwidth could be increased to the point where those deep out of order pipelines aren't needed anymore to mask memory latency then maybe we could utilize the chip area better.
SRAM used for caches also eats a tremendous amount of space and power due to its 6T, always-powered design.
Imagine MRAM (1T, non-volatile), manufactured in the same process node as the CPU itself, stacked right onto the CPU and/or connected with light-based transports. Since MRAM doesn't need to be powered when it's idle it would also allow for rapid power-switching, thus giving the chip designers more thermal headroom.
Another thing: Remember how chips used to shrink and increase in clock speed? Well, the gigahertz race has been over for a while. But if they use the longer process-nodes to introduce new technologies (different semiconductors, carbon nanotube conductors, ...) then there might be new room to push a few extra GHz.
Progress will certainly slow and at some point it'll require radical re-designs, but there's still a lot of room for improvements.
- jjoonathan 11y ago> SRAM used for caches also eats a tremendous amount of space and power due to its 6T, always-powered design. What gets in the way of using SRAM for main memory? I've always been told that it's the space multiplier (6T vs 1T+1C) but that never seemed terribly convincing because DRAM is cheap enough (and has been cheap enough for a while) that it would make sense to pay a 3x-5x premium to avoid page open/close latency even in the high-end consumer market. Heck, many consumer devices are already 2-4x overprovisioned with DRAM just in case someone doesn't like closing chrome tabs (or whatever). By process of elimination I tend to suspect it's the power draw, but it seems odd that power from leakage current on inactive SRAM gates would dramatically exceed that of DRAM's active refreshes. What gives?
- bsder 11y agoSimply put: nobody cares for big microprocessors. There is so little performance gain from switching from DRAM to SRAM that it just doesn't really matter. Caches are very good at hiding accesses to memory, and, if you need to hit a flash drive/hard disk, you are hosed anyway. Where people care a lot is in embedded microprocessors. SRAM is very scarce, and it's very definitely about area and power as DRAM basically isn't used. The problem is that you can put almost 10x more flash in the same area as SRAM (and I'm being generous--it's probably more like 20x now) and memory (flash and SRAM) is more than 50% of the die area on a modern microcontroller. Basically, every modern microcontroller ships with the maximum amount of SRAM that it is economically feasible to make. In addition, for "modern" technology nodes, SRAM cost is going up. Moore's Law broke back at the 28nm node. http://electroiq.com/blog/2014/02/the-most-expensive-sram-in-the-world-2-0/ http://electroiq.com/blog/2014/02/the-most-expensive-sram-in...