3 ms·

I wish the MK808 was a plug and play digital sign, but it's actually kind of a pain to set up and use. I've got one sitting in a drawer. If someone came out wi

by eli 11y ago

I wish the MK808 was a plug and play digital sign, but it's actually kind of a pain to set up and use. I've got one sitting in a drawer. If someone came out with a stick computer that simply connects to wifi and displays a webpage in a relatively modern browser at 1080 (or at least 720) and makes it easy, I would buy several of them at a nice premium over whatever the hardware normally costs. I actually think an Android hacker or RaspberryPI hobbyist could make some money selling something like that.

ZenoArrow 11y ago
"I wish the MK808 was a plug and play digital sign, but it's actually kind of a pain to set up and use. I've got one sitting in a drawer." What did you find painful about using it? Looks like it supports custom ROMs, did you try using something like CyanogenMod (or the Finless ROM mentioned in the linked article)?
- eli 11y ago
  I tried one firmware (maybe it was finless?) downloaded from a sketchy looking site that cause the wifi to no longer connect. There did not some to be many firmware choices that supported 1080 output. Even getting an app to run automatically on bootup felt like a chore. Regardless, I would gladly pay twice as much for the device if it came already set up. I am very pro-hobbyist, but in this case I want a fully formed product.
  - ZenoArrow 11y ago
    "Regardless, I would gladly pay twice as much for the device if it came already set up. I am very pro-hobbyist, but in this case I want a fully formed product." So something as simple as a Raspberry Pi B+ ($25), an OmniVESA (approx $7), a USB WiFi dongle (approx $9), a 4GB MicroSDHC card (approx $6), a micro USB charger (approx $4) and a short HDMI cable (approx $7). Total cost $58. Could add a cheap case if you wanted. Perhaps there are ways to do all this cheaper with an Android mini PC, but a RasPi setup would be very flexible, and wouldn't require too much setup. It's also easy to boot straight into a web browser (can find some distro recommendations here https://www.raspberrypi.org/forums/viewtopic.php?f=71&t=85020 https://www.raspberrypi.org/forums/viewtopic.php?f=71&t=8502...). http://www.mcmelectronics.com/product/RASPBERRY-PI-83-16317-/83-16317 http://www.mcmelectronics.com/product/RASPBERRY-PI-83-16317-... http://shop.pimoroni.com/products/omnivesa http://shop.pimoroni.com/products/omnivesa http://www.amazon.com/Raspberry-Pi-WIFI-Adapter-Dongle/dp/B009FA2UYK http://www.amazon.com/Raspberry-Pi-WIFI-Adapter-Dongle/dp/B0... http://www.amazon.com/Sandisk-MicroSDHC-Memory-Adapter-Packaging/dp/B000SMVQK8 http://www.amazon.com/Sandisk-MicroSDHC-Memory-Adapter-Packa... http://www.amazon.com/BlackBerry-Folding-Blade-Micro-USB-Charger/dp/B001LRPN0S/ http://www.amazon.com/BlackBerry-Folding-Blade-Micro-USB-Cha... http://www.amazon.com/Your-Cable-Store-Foot-Plated/dp/B00474YRE0/ http://www.amazon.com/Your-Cable-Store-Foot-Plated/dp/B00474... Even though you're ideally looking for an off the shelf solution, hope these suggestions are of some use.
    - eli 11y ago
      Great, now put it together for me and I'll buy three at $99 each :)

by eli 11y ago

ZenoArrow 11y ago

"I wish the MK808 was a plug and play digital sign, but it's actually kind of a pain to set up and use. I've got one sitting in a drawer." What did you find painful about using it? Looks like it supports custom ROMs, did you try using something like CyanogenMod (or the Finless ROM mentioned in the linked article)?

eli 11y ago
I tried one firmware (maybe it was finless?) downloaded from a sketchy looking site that cause the wifi to no longer connect. There did not some to be many firmware choices that supported 1080 output. Even getting an app to run automatically on bootup felt like a chore. Regardless, I would gladly pay twice as much for the device if it came already set up. I am very pro-hobbyist, but in this case I want a fully formed product.
- ZenoArrow 11y ago
  "Regardless, I would gladly pay twice as much for the device if it came already set up. I am very pro-hobbyist, but in this case I want a fully formed product." So something as simple as a Raspberry Pi B+ ($25), an OmniVESA (approx $7), a USB WiFi dongle (approx $9), a 4GB MicroSDHC card (approx $6), a micro USB charger (approx $4) and a short HDMI cable (approx $7). Total cost $58. Could add a cheap case if you wanted. Perhaps there are ways to do all this cheaper with an Android mini PC, but a RasPi setup would be very flexible, and wouldn't require too much setup. It's also easy to boot straight into a web browser (can find some distro recommendations here https://www.raspberrypi.org/forums/viewtopic.php?f=71&t=85020 https://www.raspberrypi.org/forums/viewtopic.php?f=71&t=8502...). http://www.mcmelectronics.com/product/RASPBERRY-PI-83-16317-/83-16317 http://www.mcmelectronics.com/product/RASPBERRY-PI-83-16317-... http://shop.pimoroni.com/products/omnivesa http://shop.pimoroni.com/products/omnivesa http://www.amazon.com/Raspberry-Pi-WIFI-Adapter-Dongle/dp/B009FA2UYK http://www.amazon.com/Raspberry-Pi-WIFI-Adapter-Dongle/dp/B0... http://www.amazon.com/Sandisk-MicroSDHC-Memory-Adapter-Packaging/dp/B000SMVQK8 http://www.amazon.com/Sandisk-MicroSDHC-Memory-Adapter-Packa... http://www.amazon.com/BlackBerry-Folding-Blade-Micro-USB-Charger/dp/B001LRPN0S/ http://www.amazon.com/BlackBerry-Folding-Blade-Micro-USB-Cha... http://www.amazon.com/Your-Cable-Store-Foot-Plated/dp/B00474YRE0/ http://www.amazon.com/Your-Cable-Store-Foot-Plated/dp/B00474... Even though you're ideally looking for an off the shelf solution, hope these suggestions are of some use.
  - eli 11y ago
    Great, now put it together for me and I'll buy three at $99 each :)