4 ms·
These are pretty cool, this is a datasheet for the 100V part : http://epc-co.com/epc/Portals/0/epc/documents/datasheets/EPC2036_datasheet.pdf http://epc-co.com/
by ChuckMcM 12y ago
These are pretty cool, this is a datasheet for the 100V part : http://epc-co.com/epc/Portals/0/epc/documents/datasheets/EPC2036_datasheet.pdf http://epc-co.com/epc/Portals/0/epc/documents/datasheets/EPC... which in this case is an enhancement mode transistor (so 'N' channel, or positive Vgs to turn it on)
The thing that should smack you in the eye when you read the datasheet that that it has a Theta(j-ambient) of 1100dC/W [1] which is why this tiny part is limited to 1A continuous current (1 amp x 1 amp x .065 ohms == .065 watts and a temperature rise of 71 degrees C. But it can be switching probably close to 80 watts while doing that.
I'm a bit surprised though that it doesn't list the switching time.
[1] You can get that down to 100dC/W if you solder it to a 1" square on 2oz copper but then what is the point of having such a tiny switch :-)
- madengr 12y agoThere is that guy growing sheets of diamond, if he isn't off'd by the diamond cartels. I suppose diamond semiconductors will supplant GaN some day. I'm read a few years ago about cold cathod parts, but I guess it never panned out.