4 ms·
"You are probably going to move where the power is cheap though" Yes, as my pre-comment scan of the Wikipedia article on aluminum smelting (to double-check I h
by jerf 12y ago
"You are probably going to move where the power is cheap though"
Yes, as my pre-comment scan of the Wikipedia article on aluminum smelting (to double-check I had the right electricity-intensive industrial process) said in the second paragraph [1]. I didn't think it worth adding to the comment.
Of course aluminum plants move to where electricity is cheap, all else being equal... exactly what alternative do you think I was proposing?
Further, geothermal is significantly different for this use case, as geothermal can be used for base load applications where solar can not. Since such plants tend to run without regard for where the sun is in the sky, this sort of industry would be very difficult to run off of solar power without absurdly overprovisioning for power storage, which remains a significant problem at this scale. You are also not going to run your aluminum smelting plant for 18 hours out of the day on battery power!
[1]: http://en.wikipedia.org/wiki/Aluminium_smelting http://en.wikipedia.org/wiki/Aluminium_smelting
- saalweachter 12y agoI don't know about aluminium smelters specifically, but I personally expect solar to invert the definition of off-peak electricity. Right now, electricity is cheaper at night because the demand is lower and coal plants have a minimum output, so anyone who needs a lot of electricity and can pick a time of day will use it at night. As solar becomes cheaper and more widespread, night-time electricity will become more expensive, because it is either stored in expensive batteries or generated from more expensive non-solar sources. So it seems likely to me that 10 or 20 years from now, electricity will be cheapest at noon and more expensive after dark. Here's another fun thought: 6% of electricity is lost due to transmission costs. Will it be more efficient (in some cases, at least) to physically move charged batteries from solar fields to (nearer to) end users than to send it over the wire?
- brc 12y ago>Here's another fun thought: 6% of electricity is lost due to transmission costs. Will it be more efficient (in some cases, at least) to physically move charged batteries from solar fields to (nearer to) end users than to send it over the wire? No, not in this universe, anyway. The most basic power distribution in the world is people with Ox and cart distributing lead/acid batteries to remote villages. Transmitting power this way is the least efficient way possible.
- saalweachter 12y agoI was thinking more like barges / rail cars that were essentially one giant battery, cycling back and forth. Even the most optimistic figure for current technology is still too high, about 0.03% / mile, so you only get about 200 miles (round trip) on a 6% budget. I suspect over-the-wire transmission losses are lower over that distance, but it's only a little impossible.
- joshvm 12y agoThis has already happened somewhat in Germany. Solar panels have completely disrupted midday wholesale electricity prices. The effect is so strong that occasionally the spot price goes negative: if you're not producing renewable energy, you have to pay to put your energy into the grid. http://blogs.scientificamerican.com/plugged-in/2014/10/07/energiewende-two-energy-lessons-for-the-united-states-from-germany/ http://blogs.scientificamerican.com/plugged-in/2014/10/07/en...
- mc808 12y agoRegarding the 6% transmission costs, if you have 17 charged batteries and use 1 of them to power a self-driving vehicle with negligible maintenance costs (and in a future where all vehicles are electric), it would make sense to haul the other 16 within whatever distance the vehicle can manage on a charge. It looks like a Tesla S battery pack is a little over 1,200 lbs. So for a rough estimate, consider the distance a Tesla S can tow 20,000 lbs. Probably not very far. Unless I botched my reasoning somewhere, it looks like battery energy densities would have to increase by an order of magnitude or two for this to become a thing.
- lotsofmangos 12y agoYou are also not going to run your aluminum smelting plant for 18 hours out of the day on battery power! Give it time. In 2003, Alaska built the world's largest battery at 4.7MWh. In 2012, China built the world's largest battery at 36MWh. In 2014 Southern California Edison announced it was buying a 400MWh battery. On that curve, we should be up to an 18GWh battery before all that long.
- toomuchtodo 12y agoWow, that 400MWh battery is entirely lithium ion. I would be shocked if Tesla Energy isn't assembling entire systems cargo container by cargo container in Reno and shipping them by rail across the country in the next 2-3 years.
- dragontamer 12y agoIn 1977, USA Built the world's largest "battery" at 30 GWh. That's right, 30 gigawatt hours. And yes, that's right, 1977... almost 40 years ago. It's not a chemical battery, but its a "battery" nonetheless in that it very efficiently stores electrical power. https://en.wikipedia.org/wiki/Bath_County_Pumped_Storage_Station https://en.wikipedia.org/wiki/Bath_County_Pumped_Storage_Sta... Pumped hydro electric storage ftw.
- ptaipale 12y agoYep, those are nice - Bath Country is of course not the only one out there - but they don't come without their side effects. You need to construct a dam and sacrifice some area to be used as the reservoir. Those pesky environmentalists, you know...
- rimantas 12y agoWell, we are doing quite well for such a small country then: http://www.kruoniohae.lt/en/main/activity http://www.kruoniohae.lt/en/main/activity
- jaggederest 12y agoAluminum smelters already often have captive power plants, there's no reason why that trend won't accelerate. http://www.vedantaaluminium.com/operations-cpp.htm http://www.vedantaaluminium.com/operations-cpp.htm