4 ms·

Old computers never die - their owners do. You can still have fun with an old machine - just get one, turn it on, and go for it.

WalterBright 12y ago
Yeah, they do die. My old IBM PC, put in storage in working condition, came out and when I turned it on there was a snapping noise and the machine died. This fate has befallen all my machines older than 15 years or so. They won't turn on, or turn on and fail the POST, won't boot, whatever. Sometimes there's that fine smell of smoke being released accompanying the failure. On the other hand, my Carver amp I bought 30+ years ago still works fine and I run it 16 hours a day, every day. It's the best, by far, piece of electronics I've ever bought when considering bang for the buck. The same goes for the Dahlquist speakers it drives.
- FreeFull 12y ago
  Maybe it's dried out/leaky capacitors? With older computers, often replacing the capacitors is the only thing that it takes to get them working again.
  - glhaynes 12y ago
    Tangentially: anybody have an expectation on longevity of a 2015 machine with decent components vs. one from that era? Are 2015 capacitors still as troublesome? I expect having fewer moving parts (as well as there just being fewer separate (visible) parts in general!) probably will help modern machines last longer.
  - moheeb 12y ago
    This raises the philosophical question of where the life of the computer truly lies. Is it within the capacitor? Is it within the network of the individual parts? If you replace the capacitor did you resurrect the dead or just fix a broken part? https://en.wikipedia.org/wiki/Ship_of_Theseus https://en.wikipedia.org/wiki/Ship_of_Theseus
    - lmm 12y ago
      Back when I went to university it was normal for my friends to gradually upgrade pieces, leaving after three years with a computer that had none of the the components it had arrived with.
  - grapeshot 12y ago
    The other common problems in computers as old as that would be leaking NiCad clock batteries (the corrosive gunk coming out of one of those will eat the copper right off the motherboard), tantalum capacitors which like to fail shorted and burn out, and frozen bearings on disk drives. Modern machines may be more reliable because of the lack of moving parts, but they have other disadvantages in the longevity department. Lead free solder and conductive glue will start to fail after a few thousand thermal cycles. (Conductive glue is especially used to bond flex cables to LCD screens and is not something you could repair yourself.)
  - whoopdedo 12y ago
    The "Capacitor Plague"[1] almost guarantees that machines made 10 to 15 years ago will have shortened lifespans. Would be interesting to peek into the future and see what antique computer collecting is like and if a working 2002 machine would be more expensive because of its rarity. [1] https://en.wikipedia.org/wiki/Capacitor_plague https://en.wikipedia.org/wiki/Capacitor_plague
  - WalterBright 12y ago
    You're probably right, but replacing them would be many hours of work, and there doesn't seem much point. I was mainly interested in seeing what I'd left on the hard drive :-) My 486 machine was also dead, but I pulled out the drive and managed to find an old IDE interface on a 10 year old computer that would read it (after trying several), and copied it. (Turns out there was nothing interesting there.) The old disk drive was the only piece of old equipment I could get to work.
- fit2rule 12y ago
  I have a collection of old systems, and I've been able to keep my oldest - a 30 year old Oric Atmos - alive quite easily, while teaching myself a bit of electronics to boot. You can't do that with an iPhone!

WalterBright 12y ago

Yeah, they do die. My old IBM PC, put in storage in working condition, came out and when I turned it on there was a snapping noise and the machine died. This fate has befallen all my machines older than 15 years or so. They won't turn on, or turn on and fail the POST, won't boot, whatever. Sometimes there's that fine smell of smoke being released accompanying the failure. On the other hand, my Carver amp I bought 30+ years ago still works fine and I run it 16 hours a day, every day. It's the best, by far, piece of electronics I've ever bought when considering bang for the buck. The same goes for the Dahlquist speakers it drives.

FreeFull 12y ago
Maybe it's dried out/leaky capacitors? With older computers, often replacing the capacitors is the only thing that it takes to get them working again.
- glhaynes 12y ago
  Tangentially: anybody have an expectation on longevity of a 2015 machine with decent components vs. one from that era? Are 2015 capacitors still as troublesome? I expect having fewer moving parts (as well as there just being fewer separate (visible) parts in general!) probably will help modern machines last longer.
- moheeb 12y ago
  This raises the philosophical question of where the life of the computer truly lies. Is it within the capacitor? Is it within the network of the individual parts? If you replace the capacitor did you resurrect the dead or just fix a broken part? https://en.wikipedia.org/wiki/Ship_of_Theseus https://en.wikipedia.org/wiki/Ship_of_Theseus
  - lmm 12y ago
    Back when I went to university it was normal for my friends to gradually upgrade pieces, leaving after three years with a computer that had none of the the components it had arrived with.
- grapeshot 12y ago
  The other common problems in computers as old as that would be leaking NiCad clock batteries (the corrosive gunk coming out of one of those will eat the copper right off the motherboard), tantalum capacitors which like to fail shorted and burn out, and frozen bearings on disk drives. Modern machines may be more reliable because of the lack of moving parts, but they have other disadvantages in the longevity department. Lead free solder and conductive glue will start to fail after a few thousand thermal cycles. (Conductive glue is especially used to bond flex cables to LCD screens and is not something you could repair yourself.)
- whoopdedo 12y ago
  The "Capacitor Plague"[1] almost guarantees that machines made 10 to 15 years ago will have shortened lifespans. Would be interesting to peek into the future and see what antique computer collecting is like and if a working 2002 machine would be more expensive because of its rarity. [1] https://en.wikipedia.org/wiki/Capacitor_plague https://en.wikipedia.org/wiki/Capacitor_plague
- WalterBright 12y ago
  You're probably right, but replacing them would be many hours of work, and there doesn't seem much point. I was mainly interested in seeing what I'd left on the hard drive :-) My 486 machine was also dead, but I pulled out the drive and managed to find an old IDE interface on a 10 year old computer that would read it (after trying several), and copied it. (Turns out there was nothing interesting there.) The old disk drive was the only piece of old equipment I could get to work.
fit2rule 12y ago
I have a collection of old systems, and I've been able to keep my oldest - a 30 year old Oric Atmos - alive quite easily, while teaching myself a bit of electronics to boot. You can't do that with an iPhone!