3 ms·
I had never done any RF engineering before, so I taught myself using amateur radio books and classic resources like the Handbook of Black Magic, as well
by CamperBob2 12y ago
I had never done any RF engineering before, so I taught
myself using amateur radio books and classic resources
like the Handbook of Black Magic, as well as some
mentors from Stanford and the 50 MHz and Up club who
were kind enough to answer my questions. I went through
4 iterations of the design in as many months and the
progression is pretty interesting...
Incredible. It's kind of unfortunate that hardly anyone who reads this will understand just how impressive this degree of autodidacticsm is, given the boards you ended up (successfully) designing. Nice going!
- smoyer 12y agoNarrowband signals like these aren't so hard to deal with and there's a long history of radio hacking. The ARRL, QST and thousands of "radio hackers" made up the HAM community for decades. The frequencies used by the cable companies aren't that high either - designing a board for a modern Intel processor is far harder. The thing that made these frequencies hard for CATV companies is that the signals were so wideband. A typical coaxial cable carries signals between 54 and 1000 MHz ... you're burning a lot of bias current to keep the system linear (thus avoiding distortion).
- CamperBob2 12y agoWhat you're missing is that he had to tackle a large number of disciplines and execute them at least halfway competently. Lots of people can do antenna work. Lots of people can do RF design. Lots of people can do DSP. Lots of people can do HDL. Lots of people can do C. And there are a fair number of people who could do all of the above... but 99% of them are too chicken to try. That's what earns my respect, more than anything else.