4 ms·
I've often wondered if someone would make a DC outlet strip. As the typical one has a half dozen "wall wart" type power supplies plugged into it, doing the conv
by ChuckMcM 12y ago
I've often wondered if someone would make a DC outlet strip. As the typical one has a half dozen "wall wart" type power supplies plugged into it, doing the conversion to say 24VDC and then down converting from there seem to be more convenient. But efficiency wise its something of a wash.
And from a whole house perspective, I keep hoping for a capacitor (storing charge directly rather than in chemical bonds) which would give me back most of the energy I had stored.
- reportingsjr 12y agoThat is sort of becoming a thing with USB outlets. It is starting to become quite ubiquitous. I wouldn't be surprised to see an outlet that had 4+ USB ports and a standard outlet maybe.
- jimktrains2 12y agoLaptops, speakers, and many other devices require more than USB2 can deliver (though Type-C might change that). Also, USB outlets still down convert 120V AC. It'd be much better to do it in bulk at once place in the house and let devices use that
- JoshTriplett 12y ago> Also, USB outlets still down convert 120V AC. It'd be much better to do it in bulk at once place in the house and let devices use that That's not entirely clear. Low-voltage DC has higher transmission losses, so converting to USB-level voltage in one central location might do quite a bit worse. Plus, you still need logic at the plug to detect how much power to supply.
- ChuckMcM 12y agoThis is my opinion as one. Switching supplies are 90+ efficient, at nominal load and they are less efficient below and above that nominal load. So your 48VDC converter might by 87% efficient because its rated for 500W and you're only drawing 50. And your 5V regulator may be only 92% efficient while your device is charging but 88% when your device is 'idling'.
- seanalltogether 12y agoIs there any plug system for automatically stepping voltage based on the plug design, so people wouldn't have to set it manually? Like say you had 24v as the base, using a plug with 4 prongs gives you the full 24v, a plug with 3 prongs gives you 12v, 2 prongs gives you 6v, etc...
- wtallis 12y agoAlmost all the power connectors used inside a desktop PC have at least two voltages. For example, a hard drive will usually draw from only the 5V and 12V pins, but some SSDs are designed to use 3.3V. The problem with these connectors is that they usually aren't designed for many plug/unplug cycles. The SATA power connector is also nearly unique in being designed for hotplugging by ensuring that the ground pins make contact first and disconnect last.
- JshWright 12y agoIt would be two prongs, just spaced differently to contact a different positive rail.
- tcdent 12y agoI'm using XLR connectors in some of my projects for just that. In my case: 5v, 12v, 24v, low amperage only.
- fastball 12y ago> "Most of the energy I stored" ?? I was under the impression that a capacitor takes twice the amount of energy to charge than what is actually stored within it. i.e. efficiency is a maximum of 50%.
- coryrc 12y agoOnly when you parallel an empty capacitor with a full one. Ordinary electrolytic capacitors filled via a switching supply are >99% efficient.