7 ms·
If you want to learn x86-64 assembly language, I recommend a historical approach: Start by learning 8086 assembly language, then learn 80386 (i.e., 32-bit x86)
by cperciva 17y ago
If you want to learn x86-64 assembly language, I recommend a historical approach: Start by learning 8086 assembly language, then learn 80386 (i.e., 32-bit x86) assembly language, then learn MMX/SSE assembly language; and only once you've mastered all of those, start on x86-64.
The x86 instruction set is kludges built upon kludges, and you're never going to understand it fully if you try to jump in at the end without seeing how it developed.
- rikthevik 17y agoI learned asm starting with MIPS and then had the luxury of working at a place that was designing MIPS hardware. It was nice to be able to get into the assembler when some kernel modification wasn't working very well. I have only good things to say about MIPS as a great place to learn ASM. The thing is, the better you understand how processors and pipelines work, the better you'll understand why instruction sets are the way they are. If you want to learn a very bad assembler (for programmers) but one that's very to understand (for microcontroller designers), there's always 68HC11. How do two 8-bit registers and two 16-bit registers make you feel? (Probably like going to/from memory quite a bit :)
- hilarious 17y agoDo you have any documentation you'd recommend for this, I'm not sure what to read/study. Thanks for your help cperciva.
- jacquesm 17y agoAgreed, the biggest switch is probably from 286 to 386. 486 and Pentium didn't really do much instruction set wise (sure there were changes), then the next big change is the 64 bit systems. edit: What do you mean kludges ? It's the most orthogonal instruction set known to man!
- tptacek 17y agoForget everything about the code, data, and stack segments.
- hilarious 17y agoWhat do you mean?
- tptacek 17y agoYou're going to see a lot of references to segment selectors, and apart from the fact that FS may refer to thread information, you're never going to have to remember what any of it means. You can safely consider segmentation to be detritus.
- mahmud 17y agoSpecialized segment prefixes mean jacksquat in an execution model with no specialized segments.
- jacquesm 17y agoHe means that you don't need those anymore. You used to need them (badly), especially on the smaller CPUs because otherwise you were severely limited in memory. Check out the 'mixed models' that were pretty common usage in the 80's. There were lots of them: code data model name under 64KB under 64KB Small (-ms) or Tiny (-mt) over 64KB under 64KB Medium (-mm) under 64KB over 64KB Compact (-mc) over 64KB over 64KB Large (-ml) I was so happy when I finally got out of 'model hell' and could use 'flat' mode using DJGPP. Finally C programming without the headaches. http://en.wikipedia.org/wiki/DJGPP http://en.wikipedia.org/wiki/DJGPP
- jacquesm 17y agoThe confusion and the reason you got modded down is that people don't understand that the segmentation is still present in the CPU, but that common practice now is to overlay all segments as a single 4GB space. In other words, if you really really insisted you could mess around with giving the segment registers different base values and / or lengths but you'd probably end up regretting it.