2 ms·
The real solution is to make sure your product is above $100 (preferably significantly) so you can actually 3D print the required plastics (which will be around
by CamperBob2 12y ago
The real solution is to make sure your product is above $100 (preferably significantly) so you can actually 3D print the required plastics (which will be around $10 per part). Now, you can tune your plastic parts and you don't have the NRE of molds. After you have everything tuned and have some volume, THEN you can cut a mold. And, you may never cut a mold--you can print over a thousand parts at $10 per part for $10K. How many Kickstarters ever ship more that a thousand of anything?
Good points there -- I have a scenario in mind that resembles this example. Do you have a favorite 3D printer for small instrument/device cases? Or do you outsource that work to someone who does?
So, I'm above $50K for injection molds without blinking for even a VERY simple product.
Also, something I've never understood about injection molding is why the hobbyist-accessible CNC revolution of the past 10 years or so hasn't reduced the cost of creating molds. If I do a GIS for "injection molds," it shows me a lot of pictures of things that, although concave, could easily be built by aggregating a small number of machined parts.
- bsder 12y ago> Do you have a favorite 3D printer for small instrument/device cases? Or do you outsource that work to someone who does? Outsource. I want a useful 3D printer with materials like nylon, not a MakerBot. There should be people around in any reasonably sized city. I believe that some of the Solidworks resellers now do 3D printing as a service. One thing that people continue to underestimate are silicone molds. 3D print the positive--create a silicone negative mold from the 3D positive. Now you can make your own parts out of liquid silicone rubber--some durometers of which are almost as hard as some plastics. Yes, this is incredibly messy, time consuming work, but if you have more time and/or hands than money, it's not a bad choice. > Also, something I've never understood about injection molding is why the hobbyist-accessible CNC revolution of the past 10 years or so hasn't reduced the cost of creating molds. Because no injection molder wants to deal with people producing <10,000 parts. The setup time on the injection machine exceeds the profit. I don't even need a CNC machine to create a metal mold--people did do this by hand for a whole lot of years. However, even if I could produce the mold for free, the molder doesn't want to waste the time on me. For that reason, practically every successful electronics component producing company has both a machine shop and an injection molding machine on site. Both of them tend to sit idle 90+% of the time, but every time they get used, they save $50,000.