3 ms·
I'm not sure if the jumpers were meant as a malware protection. [...] make it impossible for the BIOS to be corrupted by software, malicious or otherw
by weinzierl 12y ago
I'm not sure if the jumpers were meant as a malware protection.
[...] make it impossible for the BIOS to be corrupted
by software, malicious or otherwise
The jumper could enable the erase voltage for the flash. On the other hand it could also just pull up or down a pin that is queried before the flash routine does its work. For example one Intel Mobo manual[1] says explicitly the jumper protects from accidental corruption.
Jumper JP4 controls the protection scheme that
prevents accidental damage to or rewriting of the data
stored in Flash memory.[1]
[1] http://www.manualslib.com/manual/77721/Intel-Iwill-P4d-N.html?page=40 http://www.manualslib.com/manual/77721/Intel-Iwill-P4d-N.htm...
- userbinator 12y agoThat is an interesting example of a hybrid protection scheme - you get to choose between "software decides", "always protected", and "always unprotected". Given that the jumper is located right next to the flash, I'm inclined to believe this is a true hardware protection; likely the middle pin is connected to the write-enable of the flash, the left pin is connected to a GPIO so the software can control it, and the right pin is connected to a constant voltage to disable any writing via hardware. The open position leaves the pin free to allow writes.