3 ms·
That's why it's referred to as "The Coming Manufacturing Revolution". Technology is advancing at a rapid pace. If the problem is already solved but it's works
by melling 12y ago
That's why it's referred to as "The Coming Manufacturing Revolution". Technology is advancing at a rapid pace. If the problem is already solved but it's works too slowly then it's probably close to production ready. We aren't too far off from robots replacing millions of workers who make our smartphones, for example.
http://www.extremetech.com/electronics/195556-foxconns-robotic-workforce-isnt-precise-enough-to-assemble-iphones http://www.extremetech.com/electronics/195556-foxconns-robot...
- dragontamer 12y agoThe pace of AI advancements is slower than you'd expect. The majority of Siri / Cortana / Voice Controls were figured out in the 80s, but it took almost 30 years before AI advanced to the point where speech recognition was usable. As far as replacing workers who made smartphones... that was _already_ done in the 90s. The Sony Walkman was an entirely automated build IIRC. We went _backwards_ from that era of mass production, because Chinese workers were cheaper than machines. The key is design. Designing components that are easily grasped by robots. Taking advantage of chip shooters (https://www.youtube.com/watch?v=SRu02F6AOmg https://www.youtube.com/watch?v=SRu02F6AOmg), or other technologies. We have automatic pick-and-place machines with electronics. We have automated robots that can place screws into predetermined holes. We have assembly lines that can be designed with "press fit" plastics. But these are old innovations of decades past. When your chips are standardized sizes and are placed always at the same x / y coordinate on a board... and when reflow soldering allows a bit of error... things are pretty good for machines. In contrast, I have never seen a robot stock a shelf. You've got objects of differing sizes, non-uniform visual stimuli, changing conditions and little human assistance. Again, you're falling into the trap of not knowing what has been done before (mass production has been done since the 80s. Full lights-out factories have been made through the 90s and early 2000s. This is _not_ a new concept), vs AI problems that will take a specialized team decades to solve. (IE: Stocking a shelf).
- melling 12y agoI guess you didn't read the article that I posted because it clearly states that the robots can't do the work to the required precision. Yes, robots do a lot of work in factories but they still need further refinement before they can do some jobs that require a lot of dexterity. And yes, we've had automated factories for a long time. Steve Jobs had a highly automated factory in 1990 to build the NeXT. http://www.nytimes.com/1990/12/24/business/all-next-inc-s-plant-lacks-is-orders.html http://www.nytimes.com/1990/12/24/business/all-next-inc-s-pl...
- dragontamer 12y ago''' I guess you didn't read the article that I posted because it clearly states that the robots can't do the work to the required precision. Yes, robots do a lot of work in factories but they still need further refinement before they can do some jobs that require a lot of dexterity. ''' You miss my point. You can make complicated electronics entirely automated if the design were better.