3 ms·

If you're more into this than I am: What will 1) achieve here? Isn't the biggest problem ~elsewhere~ (i.e. my ISP sucks, and all the gazillion devices on the r

If you're more into this than I am: What will 1) achieve here? Isn't the biggest problem ~elsewhere~ (i.e. my ISP sucks, and all the gazillion devices on the route might buffer far too much data)? Put differently: Can I make a difference, even if it's "just" for me? (I .. cannot, I guess - I'm stuck with a crappy cable modem/DECT base/wifi router combination from my ISP. But I'm interested in general) Regarding 2): Is that recommended? Last time I checked most of CeroWrt was sent upstream, so is there a big difference between a reasonably current version of OpenWrt?

virtuallynathan 12y ago
All of the CoDEL algorithms are in the latest OpenWRT branch, I wouldn't advise running CeroWRT.
- teddyh 12y ago
  Would you advise against CeroWrt? Why? Is there something wrong with it? FYI, CoDEL is not only reason one would want CeroWrt; see (http://www.bufferbloat.net/projects/cerowrt http://www.bufferbloat.net/projects/cerowrt) and (http://www.bufferbloat.net/projects/cerowrt/wiki/How_is_CeroWrt_different_from_OpenWrt http://www.bufferbloat.net/projects/cerowrt/wiki/How_is_Cero...).
  - virtuallynathan 12y ago
    It hasn't been updated in a while, most changes are now in upstream (unsure about DNSSEC)...
SudoAlex 12y ago
Chances are the worst link in the chain is your ISP provided modem/router. It's the typical device which will buffer several hundreds of milliseconds of data, and it's the slowest upstream. Most sane ISPs won't do this with routers on their network which serve multiple people - it's a fault if they're over capacity (unless they intentionally want it, eg. ISPs vs Netflix). If you've got little or no control over the device your ISP sends you - there are ways around it. Either turn off WiFi (or don't connect to it), connect a single OpenWrt or CeroWrt router to that over ethernet and get all devices to connect to that router instead. You'll probably need to fiddle around with it to avoid double NAT (eg. setup the OpenWrt router in the DMZ of your ISP router if you can). Personally I've stuck with OpenWrt - it works just fine. Install qos-scripts and luci-app-qos, set your bandwidth limits in Network > QoS in the web interface, and tune anything else you want. It should enable fq_codel for you.

virtuallynathan 12y ago

All of the CoDEL algorithms are in the latest OpenWRT branch, I wouldn't advise running CeroWRT.

teddyh 12y ago
Would you advise against CeroWrt? Why? Is there something wrong with it? FYI, CoDEL is not only reason one would want CeroWrt; see (http://www.bufferbloat.net/projects/cerowrt http://www.bufferbloat.net/projects/cerowrt) and (http://www.bufferbloat.net/projects/cerowrt/wiki/How_is_CeroWrt_different_from_OpenWrt http://www.bufferbloat.net/projects/cerowrt/wiki/How_is_Cero...).
- virtuallynathan 12y ago
  It hasn't been updated in a while, most changes are now in upstream (unsure about DNSSEC)...

SudoAlex 12y ago

Chances are the worst link in the chain is your ISP provided modem/router. It's the typical device which will buffer several hundreds of milliseconds of data, and it's the slowest upstream. Most sane ISPs won't do this with routers on their network which serve multiple people - it's a fault if they're over capacity (unless they intentionally want it, eg. ISPs vs Netflix). If you've got little or no control over the device your ISP sends you - there are ways around it. Either turn off WiFi (or don't connect to it), connect a single OpenWrt or CeroWrt router to that over ethernet and get all devices to connect to that router instead. You'll probably need to fiddle around with it to avoid double NAT (eg. setup the OpenWrt router in the DMZ of your ISP router if you can). Personally I've stuck with OpenWrt - it works just fine. Install qos-scripts and luci-app-qos, set your bandwidth limits in Network > QoS in the web interface, and tune anything else you want. It should enable fq_codel for you.