4 ms·

Ex Parasolid (1989-1995), D-Cubed (1995-2000), and SolidWorks (2001-2002) dev here. Many are built on Parasolid, but many are not. Of your list only SolidWork

Ex Parasolid (1989-1995), D-Cubed (1995-2000), and SolidWorks (2001-2002) dev here. Many are built on Parasolid, but many are not. Of your list only SolidWorks is built on Parasolid. Siemens own products (NX, SolidEdge) are built on Parasolid. CATIA uses its own CATIA kernel. Dassault would like to move SolidWorks to the CATIA kernel, but they will encounter user resistance. Autodesk has its own kernel ShapeManager ( http://en.wikipedia.org/wiki/ShapeManager http://en.wikipedia.org/wiki/ShapeManager ) that it uses in Inventor and probably AutoCAD and Revit. ShapeManager was forked from Acis. There was a court case over the fork. Before the fork Autodesk used to use Acis. Dassault owns Acis ( http://en.wikipedia.org/wiki/ACIS http://en.wikipedia.org/wiki/ACIS ) which is also widely used, especially amongst the smaller players. SpaceClaim uses Acis. IIRC ProEngineer has its own kernel.

kanzure 12y ago
Hey would you be willing to be pestered for occasional code review for open-source CAD programs? Your particular experience with Parasolid and Solidworks is highly relevant and really lacking in the open-source CAD ecosystem... even if you don't write a line of code, just reviews would be hugely helpful. I checked your HN profile but there's no email (has to go in the profile field, alas).
- delhanty 12y ago
  I emailed you. Also, I just re-read your post on reverse engineering the SolidWorks format ( http://heybryan.org/solidworks_file_format.html http://heybryan.org/solidworks_file_format.html ). Re: code review - I'd have to think carefully about that - might put me in a conflicted position with my own future plans to write a lightweight modeler. I am working on reverse engineering now. We could start by swapping ideas if that would work for you... Right now, I am low on energy & time - went through burn out a few years ago and have to pace myself ...
bhouston 12y ago
Ah, you are right. I overestimated Parasolid's reach, although its reach is pretty extensive as this list implies: http://en.wikipedia.org/wiki/Parasolid http://en.wikipedia.org/wiki/Parasolid I would love to pick your brain about CAD and their kernels if you had the time, give me a shout at ben@clara.io. We are looking to expand Clara.io into the CAD space and could use some advice.
- delhanty 12y ago
  I emailed you. Clara.io looks wicked! Also, it looks like it was a lot of hard work to write. Parasolid, Acis and ShapeManager have a lot in common because they all originate from the same Romulus family tree in Cambridge, United Kingdom. Parasolid is probably the most widely used in serious high-end CAD because it is used in SolidWorks, NX and SolidEdge. Replaying history based feature models is a very hostile evolutionary environment for a b-rep modeling kernel, so Parasolid is battle hardened in a way that would be hard for Open CASCADE say to match. If you are moving into CAD, then OnShape (VC funded cloud based MCAD by the founders of SolidWorks) might by a competitor. Do you know what they will use for their in the browser kernel? Unless they are roundtripping everything to Parasolid/Acis in the cloud like Lagoa (http://www.worldcadaccess.com/blog/2014/04/logoa-going-from-simple-rendering-to-cloud-based-cad.html http://www.worldcadaccess.com/blog/2014/04/logoa-going-from-...) that is. At the minimum, an in-the-browser sketcher would be good for cloud MCAD. I have thoughts, but not enough energy, strength and time right now to write one of those ... Edit: grammar
AndrewKemendo 12y ago
Can you send me an email please: andrew@visidraft.com. We are working on cross platform collaborative CAD editing and would love to pick your brain on the topic. I would have asked elsewhere but you don't have any contact info in your profile.
- delhanty 12y ago
  I emailed you - also checked out http://visidraft.com/ http://visidraft.com/ - looks like you are mainly involved in architectural CAD right now? Edit: spelling
  - AndrewKemendo 12y ago
    Just shot a response back earlier. Yes, we are focused on Revit and SketchUp models from a business perspective, however since our engine is built around .FBX almost all CAD modeling software can use it. In terms of ME fab though, we aren't implementing that quite yet.

kanzure 12y ago

Hey would you be willing to be pestered for occasional code review for open-source CAD programs? Your particular experience with Parasolid and Solidworks is highly relevant and really lacking in the open-source CAD ecosystem... even if you don't write a line of code, just reviews would be hugely helpful. I checked your HN profile but there's no email (has to go in the profile field, alas).

delhanty 12y ago
I emailed you. Also, I just re-read your post on reverse engineering the SolidWorks format ( http://heybryan.org/solidworks_file_format.html http://heybryan.org/solidworks_file_format.html ). Re: code review - I'd have to think carefully about that - might put me in a conflicted position with my own future plans to write a lightweight modeler. I am working on reverse engineering now. We could start by swapping ideas if that would work for you... Right now, I am low on energy & time - went through burn out a few years ago and have to pace myself ...

bhouston 12y ago

Ah, you are right. I overestimated Parasolid's reach, although its reach is pretty extensive as this list implies: http://en.wikipedia.org/wiki/Parasolid http://en.wikipedia.org/wiki/Parasolid I would love to pick your brain about CAD and their kernels if you had the time, give me a shout at ben@clara.io. We are looking to expand Clara.io into the CAD space and could use some advice.

delhanty 12y ago
I emailed you. Clara.io looks wicked! Also, it looks like it was a lot of hard work to write. Parasolid, Acis and ShapeManager have a lot in common because they all originate from the same Romulus family tree in Cambridge, United Kingdom. Parasolid is probably the most widely used in serious high-end CAD because it is used in SolidWorks, NX and SolidEdge. Replaying history based feature models is a very hostile evolutionary environment for a b-rep modeling kernel, so Parasolid is battle hardened in a way that would be hard for Open CASCADE say to match. If you are moving into CAD, then OnShape (VC funded cloud based MCAD by the founders of SolidWorks) might by a competitor. Do you know what they will use for their in the browser kernel? Unless they are roundtripping everything to Parasolid/Acis in the cloud like Lagoa (http://www.worldcadaccess.com/blog/2014/04/logoa-going-from-simple-rendering-to-cloud-based-cad.html http://www.worldcadaccess.com/blog/2014/04/logoa-going-from-...) that is. At the minimum, an in-the-browser sketcher would be good for cloud MCAD. I have thoughts, but not enough energy, strength and time right now to write one of those ... Edit: grammar

AndrewKemendo 12y ago

Can you send me an email please: andrew@visidraft.com. We are working on cross platform collaborative CAD editing and would love to pick your brain on the topic. I would have asked elsewhere but you don't have any contact info in your profile.

delhanty 12y ago
I emailed you - also checked out http://visidraft.com/ http://visidraft.com/ - looks like you are mainly involved in architectural CAD right now? Edit: spelling
- AndrewKemendo 12y ago
  Just shot a response back earlier. Yes, we are focused on Revit and SketchUp models from a business perspective, however since our engine is built around .FBX almost all CAD modeling software can use it. In terms of ME fab though, we aren't implementing that quite yet.