5 ms·

My Solar Energy Idea

10 points by scobar 12y ago

deeviant 12y ago
I worked in a CPV(Concentrated PhotoVoltaic) start-up. We used Fresnel lenses printed on cheap, rigid, inflatable substrates to focus highly concentrated light on very high efficiency multi-junction cells(with real-world efficiencies of >40%), using high precision independently tracking platforms. A few points: * Simplicity is success, the more complicated your process is, the more likely it will fail. Our rig was complicated, but your proposed solution is much much more so. * CPV is the leper of the solar industry, nearly every player in the CPV space is dead or dying, and most VC's avoid it like the plague. * With any high concentration CPV system, you will not generate power and potentially melt/destroy your rig if you do not have an accurate tracking system, which are expensive and often require constant maintenance. * Quantum dot solar cells basically don't exist outside of theory. The highest efficiency I've heard coming lab examples is somewhere below 10%. Multi-junction cells, although expensive, do exist and are obtainable(spectrolab, etc). * Every time light reflected or otherwise interacts with a non-vaccum medium, it loses energy. CPV system should be designed to interact with the light as little as possible, while the above design seems to maximize interaction. * Module costs are in constant decline and unpredictably so, it is extremely dangerous to build any business module based on current 1-sun panel prices (see solyndra). * There are massive infrastructures in place to deliver electrical energy, while very few to deliver light energy, and none at all to deliver this sort of high energy light. In short, it would be far more technologically and economically efficient to deliver power to areas remote from the generate site by converting it to electricity. * In reference to your comment related to shifting the light to a specific frequency: It is very difficult to shift the frequency of light, and there are losses and limitations ( see raman shifting). If you could design a system to shift wide band EM radiation to a single band, cheaply, without significant losses, you would have revolutionized no just the solar energy sector, but a great many other industries as well. I have seen prismatic systems which split light into different bands, each which are channelled to a solar cell with a matching band gap, but once again, the cost and loss made this approach uninviting. * In short: How does this unit track the sun, as that's the first hurdle to handle with any CPV solution. Then what are your optical losses? What's LCOE can be expected from this sort of design and how does that compare to a 1-sun type module bench mark. What are the benefits of this design of current designs? If you are looking to build a product, you should define a MVP: a simple demo that can demonstrate value to somebody. If you are trying to assist the world in general with intellectual philanthropy, I would better define how this system could be expected to perform, and how is it better/cheaper/whatever-er than the current systems.
- scobar 12y ago
  First, thank you for your thorough response. You have more experience than I do in this domain, and I really appreciate you taking the time to offer your insight. > With any high concentration CPV system, you will not generate power and potentially melt/destroy your rig if you do not have an accurate tracking system, which are expensive and often require constant maintenance. For the tracking system you mentioned to protect the rig, do you mean sensors to monitor energy throughput/system temperature/etc.? > Quantum dot solar cells basically don't exist outside of theory. The highest efficiency I've heard coming lab examples is somewhere below 10%. Multi-junction cells, although expensive, do exist and are obtainable(spectrolab, etc). Do you know if the reported efficiency of quantum dot solar cells is based on input of the entire solar spectrum or from a single frequency? Do you know if multi-junction cells (or a different technology) would convert a laser into electricity more efficiently? As I understood it, multi-junction technology was specifically designed to better handle multiple wavelengths. > In reference to your comment related to shifting the light to a specific frequency: It is very difficult to shift the frequency of light, and there are losses and limitations ( see raman shifting). If you could design a system to shift wide band EM radiation to a single band, cheaply, without significant losses, you would have revolutionized no just the solar energy sector, but a great many other industries as well. I have seen prismatic systems which split light into different bands, each which are channelled to a solar cell with a matching band gap, but once again, the cost and loss made this approach uninviting. Achieving a wide-to-single band shift with minimal loss was the mark I was aiming for, and I hope someone figures this out in my lifetime. I'm curious to see how near or embarrassingly far I was from the target. > In short: How does this unit track the sun, as that's the first hurdle to handle with any CPV solution. Then what are your optical losses? What's LCOE can be expected from this sort of design and how does that compare to a 1-sun type module bench mark. What are the benefits of this design of current designs? If you are looking to build a product, you should define a MVP: a simple demo that can demonstrate value to somebody. If you are trying to assist the world in general with intellectual philanthropy, I would better define how this system could be expected to perform, and how is it better/cheaper/whatever-er than the current systems. I was taking the 'intellectual philanthropy' route, but I really am curious to learn my inaccurate assumptions and misconceptions about the idea as well. The first metrics I'd like to test are the energy lost between the solar radiation input and laser output as well as the amount of loss recuperated by converting the waste heat to electricity or a laser. If the efficiency were not substantially better than directly pumping a NdCrYAG laser with solar radiation, then the idea would not be worth pursuing. My underlying goal with the idea was to reduce the cost of electricity and reduce consumption of fossil fuels to produce electricity simultaneously. Thank you again for your input and your time.

10 points by scobar 12y ago

I worked in a CPV(Concentrated PhotoVoltaic) start-up. We used Fresnel lenses printed on cheap, rigid, inflatable substrates to focus highly concentrated light on very high efficiency multi-junction cells(with real-world efficiencies of >40%), using high precision independently tracking platforms. A few points: * Simplicity is success, the more complicated your process is, the more likely it will fail. Our rig was complicated, but your proposed solution is much much more so. * CPV is the leper of the solar industry, nearly every player in the CPV space is dead or dying, and most VC's avoid it like the plague. * With any high concentration CPV system, you will not generate power and potentially melt/destroy your rig if you do not have an accurate tracking system, which are expensive and often require constant maintenance. * Quantum dot solar cells basically don't exist outside of theory. The highest efficiency I've heard coming lab examples is somewhere below 10%. Multi-junction cells, although expensive, do exist and are obtainable(spectrolab, etc). * Every time light reflected or otherwise interacts with a non-vaccum medium, it loses energy. CPV system should be designed to interact with the light as little as possible, while the above design seems to maximize interaction. * Module costs are in constant decline and unpredictably so, it is extremely dangerous to build any business module based on current 1-sun panel prices (see solyndra). * There are massive infrastructures in place to deliver electrical energy, while very few to deliver light energy, and none at all to deliver this sort of high energy light. In short, it would be far more technologically and economically efficient to deliver power to areas remote from the generate site by converting it to electricity. * In reference to your comment related to shifting the light to a specific frequency: It is very difficult to shift the frequency of light, and there are losses and limitations ( see raman shifting). If you could design a system to shift wide band EM radiation to a single band, cheaply, without significant losses, you would have revolutionized no just the solar energy sector, but a great many other industries as well. I have seen prismatic systems which split light into different bands, each which are channelled to a solar cell with a matching band gap, but once again, the cost and loss made this approach uninviting. * In short: How does this unit track the sun, as that's the first hurdle to handle with any CPV solution. Then what are your optical losses? What's LCOE can be expected from this sort of design and how does that compare to a 1-sun type module bench mark. What are the benefits of this design of current designs? If you are looking to build a product, you should define a MVP: a simple demo that can demonstrate value to somebody. If you are trying to assist the world in general with intellectual philanthropy, I would better define how this system could be expected to perform, and how is it better/cheaper/whatever-er than the current systems.

scobar 12y ago
First, thank you for your thorough response. You have more experience than I do in this domain, and I really appreciate you taking the time to offer your insight. > With any high concentration CPV system, you will not generate power and potentially melt/destroy your rig if you do not have an accurate tracking system, which are expensive and often require constant maintenance. For the tracking system you mentioned to protect the rig, do you mean sensors to monitor energy throughput/system temperature/etc.? > Quantum dot solar cells basically don't exist outside of theory. The highest efficiency I've heard coming lab examples is somewhere below 10%. Multi-junction cells, although expensive, do exist and are obtainable(spectrolab, etc). Do you know if the reported efficiency of quantum dot solar cells is based on input of the entire solar spectrum or from a single frequency? Do you know if multi-junction cells (or a different technology) would convert a laser into electricity more efficiently? As I understood it, multi-junction technology was specifically designed to better handle multiple wavelengths. > In reference to your comment related to shifting the light to a specific frequency: It is very difficult to shift the frequency of light, and there are losses and limitations ( see raman shifting). If you could design a system to shift wide band EM radiation to a single band, cheaply, without significant losses, you would have revolutionized no just the solar energy sector, but a great many other industries as well. I have seen prismatic systems which split light into different bands, each which are channelled to a solar cell with a matching band gap, but once again, the cost and loss made this approach uninviting. Achieving a wide-to-single band shift with minimal loss was the mark I was aiming for, and I hope someone figures this out in my lifetime. I'm curious to see how near or embarrassingly far I was from the target. > In short: How does this unit track the sun, as that's the first hurdle to handle with any CPV solution. Then what are your optical losses? What's LCOE can be expected from this sort of design and how does that compare to a 1-sun type module bench mark. What are the benefits of this design of current designs? If you are looking to build a product, you should define a MVP: a simple demo that can demonstrate value to somebody. If you are trying to assist the world in general with intellectual philanthropy, I would better define how this system could be expected to perform, and how is it better/cheaper/whatever-er than the current systems. I was taking the 'intellectual philanthropy' route, but I really am curious to learn my inaccurate assumptions and misconceptions about the idea as well. The first metrics I'd like to test are the energy lost between the solar radiation input and laser output as well as the amount of loss recuperated by converting the waste heat to electricity or a laser. If the efficiency were not substantially better than directly pumping a NdCrYAG laser with solar radiation, then the idea would not be worth pursuing. My underlying goal with the idea was to reduce the cost of electricity and reduce consumption of fossil fuels to produce electricity simultaneously. Thank you again for your input and your time.