3 ms·
> Unfortunately, wire wrapping equipment is too > expensive for me to justify to myself currently. $30.50 from Mouser [1] :-) I've got a couple of these an
by ChuckMcM 12y ago
> Unfortunately, wire wrapping equipment is too
> expensive for me to justify to myself currently.
$30.50 from Mouser [1] :-) I've got a couple of these and the OK power wrap which takes impossible to find NiCd batteries. The point I'm trying to make is that wire wrapping, as a prototyping scheme, is inexpensive, although it is very time consuming. I used to build Z80 systems with wirewrap all the time, and it is both quieter (from an electronic noise perspective) and more durable than solderless breadboards.
Of course with places like OSHPark you can make PCBs pretty cheaply so that is a consideration as well.
[1] http://www.mouser.com/ProductDetail/OK-Industries/WSU-30M/?qs=ZAOMJWF7Iq%2FJ6X%252by%2Fzsyzg%3D%3D&kpid=2013947&gclid=COrEwafkrMECFUKCMgodeVEALw http://www.mouser.com/ProductDetail/OK-Industries/WSU-30M/?q...
- monstermonster 12y agoUgh that brings back bad memories of my first ever proper job which was wirewrapping prototypes for a couple of design engineers. Was ok for the first couple of hours, then you realised why they didn't do it themselves. I built a simple Z80 system in 1997 and refused to do that again so I used strip board. Worked fine. Wouldn't use it for analogue/RF though.
- TheLoneWolfling 12y agoMeh, should have specified. If I was going to be building something like a homebrew CPU, I would not want to go with a manual wire wrapping tool. Plus I'm in Canada, which means a lot of places have higher shipping charges, yay. But as for simple boards? Wire wrapping all the way. If nothing else, it tends to be easier to modify than an ordinary PCB.