5 ms·

Interestingly, I'm looking to do exactly this in a new home (new to me, not newly constructed). I'll soon be moving to a park home (a relatively-permanent mobi

Interestingly, I'm looking to do exactly this in a new home (new to me, not newly constructed). I'll soon be moving to a park home (a relatively-permanent mobile home) that is in need of a fair amount of renovation. I'll be running all lighting, computers and the TV off 12v DV circuits powered by bank of vehicle batteries and where the batteries are charged from 12v solar panels.

crististm 12y ago
Have you considered cabling loses? There is a reason power lines use very high voltages.
- webignition 12y ago
  I've considered voltage drop over cable length only in as far as I'm aware that it occurs. I haven't tested the level of voltage drop. I currently use 12v circuits in my camper van and haven't experienced any significant drop over cables about 3m in length. LED-based lighting and a 12v fridge operate as expected and the voltage at the point the power reaches these devices is very close to the voltage over the battery supplying the current. I previously used 12v circuits in a narrowboat I used to own and didn't experience any drop over cables about 20m in length. This used halogen-based lighting and again the voltage at a lamp was very close to the voltage over the battery.
  - zAy0LfpBZLC8mAC 12y ago
    Just to be sure: You are aware that you have to measure the voltage drop under load? Even with rather thick wires, 20m should give you some noticable voltage drop with any non-minimal load.
ZoFreX 12y ago
Converting voltages is trivial with AC, how do you handle devices that require something other than 12v (lots of phones want 5, lots of laptops want 18) with a DC system?
- webignition 12y ago
  I'll be fitting some 12v-based USB wall sockets, much like the type you can fit in a car. These can then provide power for phones. Regarding computers, I've so far only considered my desktop. You can get ready made DC to DC ATX power supplies quite easily [1]. [1] http://www.mini-box.com/DC-DC http://www.mini-box.com/DC-DC
tacoman 12y ago
What sort of plugs and connectors are you going to use for this?
- webignition 12y ago
  Could you be a little more specific?
  - tacoman 12y ago
    Sure. For example I imagine you'll have some kind of 12v receptacle in the wall where you could plug in a computer or a lamp of some kind. Is there a standard for this type of thing?

crististm 12y ago

Have you considered cabling loses? There is a reason power lines use very high voltages.

webignition 12y ago
I've considered voltage drop over cable length only in as far as I'm aware that it occurs. I haven't tested the level of voltage drop. I currently use 12v circuits in my camper van and haven't experienced any significant drop over cables about 3m in length. LED-based lighting and a 12v fridge operate as expected and the voltage at the point the power reaches these devices is very close to the voltage over the battery supplying the current. I previously used 12v circuits in a narrowboat I used to own and didn't experience any drop over cables about 20m in length. This used halogen-based lighting and again the voltage at a lamp was very close to the voltage over the battery.
- zAy0LfpBZLC8mAC 12y ago
  Just to be sure: You are aware that you have to measure the voltage drop under load? Even with rather thick wires, 20m should give you some noticable voltage drop with any non-minimal load.

ZoFreX 12y ago

Converting voltages is trivial with AC, how do you handle devices that require something other than 12v (lots of phones want 5, lots of laptops want 18) with a DC system?

webignition 12y ago
I'll be fitting some 12v-based USB wall sockets, much like the type you can fit in a car. These can then provide power for phones. Regarding computers, I've so far only considered my desktop. You can get ready made DC to DC ATX power supplies quite easily [1]. [1] http://www.mini-box.com/DC-DC http://www.mini-box.com/DC-DC

tacoman 12y ago

What sort of plugs and connectors are you going to use for this?

webignition 12y ago
Could you be a little more specific?
- tacoman 12y ago
  Sure. For example I imagine you'll have some kind of 12v receptacle in the wall where you could plug in a computer or a lamp of some kind. Is there a standard for this type of thing?