3 ms·
I once assisted getting a barge into a port. Technically it was a barge, because it didn't have its own engines, but it was an FPSO[0] and it was 310 metres lo
by ColinWright 12y ago
I once assisted getting a barge into a port. Technically it was a barge, because it didn't have its own engines, but it was an FPSO[0] and it was 310 metres long and 80 metres wide - you could fit three football fields in its footprint.
My job was to provide real-time live radar from the land-based VTS[1]. It had been decided that only relying on GPS was a risk, and that independent radar images would be necessary to confirm position, course, and speed. We were transmitting live radar from Port Control over a 19.2k baud VHS data link to my laptop on the barge. Using the radar data we re-calibrated and cross-checked the GPS positioning to make sure there was no drift, error, or distortion. There was some interesting math going on underneath.
Modern radars sample at 50 MHz, giving a 3m inter-sample distance. Getting that 50 MBytes/sec data down a 19.2k bits/sec channel was a challenge. There were some easy gains (inter-pulse dead-time, blanking) but we still needed a radar image the pilots and captains could rely on, especially coming in from open water.
There's a picture of it coming in to the river[2] and a video[3] of the vessel, having been fitted, leaving the river. When it came in it didn't have all the super-structure, and the highest point was the heliport, which is where I stood for much of the time.
An interesting job.
[0] http://en.wikipedia.org/wiki/Floating_production_storage_and_offloading http://en.wikipedia.org/wiki/Floating_production_storage_and...
[1] http://en.wikipedia.org/wiki/Vessel_traffic_service http://en.wikipedia.org/wiki/Vessel_traffic_service
[2] http://www.ship-technology.com/projects/bonga-fpso/bonga-fpso1.html http://www.ship-technology.com/projects/bonga-fpso/bonga-fps...
[3] https://www.youtube.com/watch?v=wKLXiHPNu8A https://www.youtube.com/watch?v=wKLXiHPNu8A
- mjb 12y agoCool story! > Modern radars sample at 50 MHz, giving a 3m inter-sample distance. Getting that 50 MBytes/sec data down a 19.2k bits/sec channel was a challenge Surely you would do the processing for target extraction on the radar's side of that link, and send much less frequent samples from the estimated track over the slow link? Tracking on scanning radars can be tricky, but I suspect that would something so big and so slow the processing would be quite simple. It's also a bit surprising that ports don't do this with secondary radar (like airports do). Using the ship's signals with PCL or similar technology would definately be feasible. Radar is a technology with great promise. The advances in computing power, signal processing, and radio technology over the last decade or so is a radar revolution waiting to happen.
- ColinWright 12y ago> Surely you would do the processing for target > extraction on the radar's side of that link, > and send much less frequent samples from the > estimated track over the slow link? That's the obvious thing to try, and it works well in ideal conditions when there are only large targets, and no clutter. Lots of people track at the radar head and only send what they believe to be the stuff that matters. We work in contexts where there can be personal water-craft in areas of moderate clutter, and plot extractors have a very poor record and even worse reputation for finding the real targets that are most at risk of being run down by vessels. We transmit the actual radar video so the operators can put the Mark I eyeball on the image. Customers like that, and we regularly out-perform our competitors at getting customers to find and identify small targets at risk.
- deleted 12y ago[deleted]