5 ms·
AltBeacon
- brokentone 12y agoI'm not seeing anything on the community leadership, board, voting etc. The only references I see are to Radius Networks. So, the way I read the mission statement is: We [Radius Networks] firmly believe that an open specification would help everyone, and we [Radius Networks] want to do it right. This is simply the proposal, now we [Radius Networks] would like feedback from the community.
- csexton 12y agoThis is something we at Radius Networks are trying to figure out. We've been committed to open source for a while and wanted to get the proposal published -- but are actively researching how to properly establish this spec. Do you have examples of organizations or communities that have good answers to your questions?
- brokentone 12y agoI don't know that I'm asking questions here, but I don't really understand an "open source spec" -- public specs are public, there isn't really source to a spec. You're asking for a community RFC on a spec, but have not specified how the good ideas will come forward, who will be voting on them, etc. If it's just your company as the "voting party," it's not very open either. This just leaves the Radius Networks spec for beacons.
- drewcrawford 12y agoI've done quite a lot of thinking about how governance boards could work (or not) for mobile-based projects. The short answer is that sitting on a governance board takes time and effort, and mobile developers at large aren't really convinced of the benefit (relative, to, say, the Debian advisory boards). To overcome this you'd need to recruit from people invested in the problem. Probably your competitors.
- StarDestroyer 12y agoI think the answer would be to propose the beacon to be part of the Bluetooth SIG specifications. Any group of 3 companies in good standing in the Bluetooth SIG (adopter or above) can propose this to the SIG. This is called a New Work Proposal. This can then be taken up by a Study group/working group to actually get the specifications adopted by the Bluetooth SIG. This is the link to the NWP: https://www.bluetooth.org/docman/handlers/DownloadDoc.ashx?doc_id=266145 https://www.bluetooth.org/docman/handlers/DownloadDoc.ashx?d... (Requires login and you need to be a Bluetooth SIG member) Edit: This may be a better link as it shows the dcouments available in the Bluetooth SIG. https://www.bluetooth.org/en-us/specification/reference-publications https://www.bluetooth.org/en-us/specification/reference-publ...
- josephlord 12y agoDoes anyone know if this appears as an iBeacon to iOS devices? You can get iOS devices to listen for other BLE advertisers (or advertise their UUID) in the background (even after the app is closed due to memory pressure) but I haven't been able to make it survive a phone reboot. If anyone can get that working please let me know.
- csexton 12y agoAltBeacon will not register as a CoreLocation Beacon on an iOS device. Full disclosure: I work for Radius Networks.
- rodh257 12y agoSo how do I deal with supporting both Android and iOS from a single Beacon?
- csexton 12y agoI believe the easiest approach would be to broadcast both formats.
- alexeckermann 12y agoInterested to know how you intend to do that with all the advertising space already used up by one of the beacon advertisements?
- maxsilver 12y agoOne option is to alternatively switch between both broadcasts on a single radio. You broadcast a single iBeacon-only message, sleep for a few hundred miliseconds and then broadcast a new AltBeacon message. The beacon does this so quickly, that it's usually sending out two or three of both kind of messages every second. It's effectively an iBeacon + AltBeacon in one device.
- Timmmmbob 12y agoBut how is iBeacon proprietary anyway? It's just a static BLE advertisment of a UUID. Anyone can do that.
- deleted 12y ago[deleted]
- 0x0 12y agoI think these guys had a bunch of ibeacon utilities for ios and osx, as well as detailed docs on the protocol online, but they were recently pulled, at least from homebrew. Did Apple intervene?
- justina1 12y agoThe spec for iBeacon is proprietary and the name is trademarked (http://tmsearch.uspto.gov/bin/showfield?f=doc&state=4803:h5eavx.2.1 http://tmsearch.uspto.gov/bin/showfield?f=doc&state=4803:h5e...). IIRC, Apple even went so far as to revoke iBeacon usage from companies that tried to make an Android library (Radius Networks, the creators of this spec, being one of them).
- xur17 12y agoIt would appear that iBeacons just broadcast a uuid that clients can discover, and then clients are able to lookup the location of the device from a database. I don't have in depth knowledge of iBeacons, but after skimming the spec, it would appear that this does the same thing, so I feel like I am missing something. How does this differ?
- maxsilver 12y ago> How does this differ? Fundamentally, it doesn't. AltBeacon (as far as I can tell) exists simply so Apple has a harder time using their bullying legal tactics against people. Specifically, the folks behind AltBeacon (RadiusNetworks) previously made an open source Android library that allowed Android apps to easily detect and use iBeacons. Apple threw their lawyers on them, and they pulled the Android library. Presumably, Apple will have a harder time being a bad citizen against AltBeacon.
- alexeckermann 12y agoI haven't been able to find definitive reports of this — I wasn't aware of it when it happened and am piecing together details I can find. If Radius Networks was producing commercial iBeacon products (SDK's) then Apple was within their rights to stop that. To be honest, I think that is fair. I can't imagine this is preventing Android from using iBeacons. My opinion would be that it is preventing profiteering from something Apple a) has a trademark on and b) might want available for free. I assume AltBeacon is the fallout from this. It would be nice if Radius and Apple could work together on Android support. Could be likely that its happening in Android OS already?
- lnanek2 12y agoThe RadiusNetworks library for Android was very good, I used it before at some hackathons on Google Glass and it worked great. They had a free version that was great and a pay version with extra features like conserving battery use. There is no chance in the world that Apple killed it because they wanted a freer version for Android. They pretty clearly didn't want any version for Android at all.
- ChikkaChiChi 12y agoThe biggest problem with Beacons is that the range is unpredictable. Without a better handle on proximity, many of the use cases I can immediately think of are of no greater benefit than GPS or WiFi nodes. It's a shame, because there are some amazing things you can do once you are able to start exchanging data based on passing a node by (< 3 meters)
- venus 12y agoWhy is this being downvoted? It's exactly right. The distance to beacons is extremely unpredictable. Just holding the phone or a beacon in your hand slightly differently is often enough to make the estimated distance change by 10m. And yes, it's a huge barrier to usefulness.
- ivanca 12y agoIt seems like a very easy problem to solve, why don't the beacons broadcast their locations? (latitude and longitude, then just subtract the GPS location)
- alexeckermann 12y agoIf the thing the beacon is attached to moves the co-ordinates would need to update and would not be of use because its just GPS. Static beacons are useful where GPS resolution isn't great (concrete canyons), in buildings/structures or an area where theres a high density of beacons that GPS can't resolve quickly or finely enough. A beacon represents a thing and not a fixed location. A beacon on a vehicle would say "hi I'm vehicle ABC123…" rather than trying to find that vehicle by 2D geospatial resolve from a GPS fix referencing a known database of last locations of vehicles.
- alexeckermann 12y agoThis is entirely dependant on the beacon antenna design and its configuration. I have tested various beacons and have found that beacons using ceramic chip antennas do give these wild and unpredictable ranging values where as a trace antenna, especially the ones provided by TI, are exceptionally good once configured with correct TX power settings. Using Apple's devices as iBeacons are very accurate. I usually have an margin of error in the region of +/- 10cm at its worst. But the point of beacons is that they represent a physical thing. "A thing is here. Have its identifier" rather than using GPS or a-GPS to resolve a 2D coordinate that then needs geospatial querying to find an object "closest" to that reported position. No matter how good 2D coordinates are if the thing doesn't stay in one spot or if the accuracy is not great (indoors) then its just a guessing game.
- templeos2 12y agoDid you try the random beacon to see if God talked. Yeah, you might want to go ahead and do that, dumb fuck.
- azdle 12y agoCan anyone explain why a random beacon ID is better than just using something like a URL? That would provide not only uniqueness with an existing and fair registry, but also an implicit way of getting basically unlimited information about a beacon. You stick a beacon on a bus stop sign that broadcasts "mt.obcn.org/XXXXXXXXXX" where MetroTransit owns mt.obcn.io and XXXXXXXXXX is the bus stop id and querying that URL returns a JSON blob about that bus stop.
- alexeckermann 12y agoSimple answer: Available advertising space. The identifier field in the iBeacon spec is a 16-byte UUID and no longer than that, AltBeacon has a 20-byte space but its because it includes an unstructured major, minor (compared to iBeacon). If your example was to be represented it would be 22-byte in length which is outside the bounds available — granted that I took the number of X literally and could be shortened multiple ways. Moreover, the UUID is described as a region identifier where, in your scenario, all the beacons for the bus company would have the same region identifier but each individual beacon representing a stop would have an individual major and minor identifier (2-byte each) to uniquely identify that particular stop. So the way in which the iBeacon spec and somewhat AltBeacon are authored don't really allow for that kind of implementation because of the limitations imposed by the small advertising packet space. Its intended that the identifier space be used for something like a UUID with a set of supporting identifiers (major, minor). As you can see from the AltBeacon spec diagram; there is only 28-bytes available for advertisable data on a Bluetooth Smart peripheral. So there is not a lot of room to play with.
- azdle 12y agoYep, I over counted the bytes in the AltBeacon spec, but I still think that a URI-based beacon would be very beneficial. I'm not saying that it needs to fit into the iBeacon or AltBeacon specs, I'm just commenting that I think we'd be much better off with a beaconing protocol that doesn't require some central database controlled by one company. I don't know that much about iBeacon and how the major and minor work, but something similar could work by using a aa.bbb.cc/xxx/yyy type of URL. Sure you're wasting 2-4 bytes on the slashes and dots, but I think that would be worth it to have it be a completely open protocol. Something you should know about me, I'm overly excitable. I've decided that we need to develop one universal standard that covers everyone's use cases. I'm going to create OpenBeacon! http://obcn.io http://obcn.io