3 ms·
That's true if your switches are talking to a 20A relay and flipping the circuit on and off. If all you have is a switch sending a radio signal to a lightbulb,
by wlesieutre 12y ago
That's true if your switches are talking to a 20A relay and flipping the circuit on and off. If all you have is a switch sending a radio signal to a lightbulb, then you no longer have a controller that needs to be accessible. Just the switches and various "internet of things" devices that are always plugged into always-on line power. That's what Thread is for.
The one thing I wonder about is replacing lightbulbs when they fail. It's a good safety practice to kill the circuit when you're doing it, and without a hardwired switch you'll have to do that at the breaker now. On the other hand, if you're buying fancy wireless LED bulbs, they'd damn well better last longer than an incandescent A19.
- bravo22 12y agoThread would actually be overkill for that application. Too much crap on the stack. Just use BLE for your switch to talk to your bulb. Done. BLE and 802.15.4 have near identical modulation, and BLE has very low overhead compared to Zigbee.
- wlesieutre 12y agoI mention Zigbee there because it's what Philips' hue lights use. Maybe it's overkill, but it seems to work pretty well for them.