4 ms·
>It looks like the inside of the pan has the same fins, which makes sense otherwise they'd have uneven thicknesses. That would be a serious cleaning issue. Doe
by ZoF 12y ago
>It looks like the inside of the pan has the same fins, which makes sense otherwise they'd have uneven thicknesses. That would be a serious cleaning issue.
Doesn't look like that at all to me; in fact I think if the inside was finned it would be an immediate no-go for most, for the very reason you've stated.
- personZ 12y agoGiven that the company goes to enormous lengths to never show or talk about the inside of the pan, I have to assume this is the Achilles heal. If the fins aren't replicated on the inside, then some areas will be mm from the flame, other areas cms (which, as an aside, means an enormous amount of material per pan) -- aluminum is a decent heat conductor, but that would still be a very bad recipe for cookware.
- slang800 12y agoIn addition they would be ridiculously expensive to manufacture if the fins were only on the outside. Normally cookware is made on a lathe (http://youtu.be/8uuFWzkRcAg?t=1m12s http://youtu.be/8uuFWzkRcAg?t=1m12s) or a press from sheet metal. So, if you have areas that are thicker than others you'd need to use an entirely different method of manufacturing them... like casting or welding on the "fins" after the rest of the pot/pan was shaped.
- Crito 12y agoWhat's up with that guy wearing thick gloves while using that lathe? Isn't not wearing gloves while working with a lathe like rule number one?
- ertdfgcb 12y agoI thought rule number one when working with a lathe is "absolutely no strings or loose clothing at all ever".
- WalterBright 12y agoAnd remember to take the key out of the chuck before turning it on. A kid in my high school metal shop forgot once, and the key punched a nice hole in the wall.
- ertdfgcb 12y agoThat reminds me of the guy who tried to protect his fingers from the pedestal grinder by using the sleeve of his hoodie instead of walking 20 feet to the tool room to get some gloves. His sleeve got caught at torn completely off. Fortunately he wasn't hurt and banned from the metal shop.
- WalterBright 12y agoThe drill press in the school shop had a large picture taped next to it of a guy with long hair that had half of it pulled out by a drill press. It was pretty motivating :-)
- SoftwareMaven 12y agoI would imagine the heat of working the metal like that would be enough to be uncomfortable at best. Worse, the edges could be sharp.
- WatchDog 12y agoThe article states that the pan is cast aluminium.
- prawn 12y agoMight be wrong, but I suspect they don't show the inside because it looks like a normal saucepan and it's the futuristic exterior that likely gets them sales. Just can't see how a saucepan with those fins inside would be at all useful, whether they're far more efficient or not. Couldn't stir a sauce or easily cook pasta, etc?
- colanderman 12y agoThey could show the pan at a slight angle. Someone has to have told them their doubt about the inside.