4 ms·

You're getting downvoted, but I can corroborate. I've called 911 to verify that my VOIP install is providing correct ANI. If you terminate a PRI into your PBX,

by quesera 12y ago

You're getting downvoted, but I can corroborate. I've called 911 to verify that my VOIP install is providing correct ANI. If you terminate a PRI into your PBX, you can send whatever number identification you desire. This is fun for mucking about with coworkers (why is my wife calling me from home in the middle of the day?!?) but serious business for 911 services. You get it right, and you test it by calling them. Identify clearly and immediately that this is not an emergency, but an ANI test and would they please verify that the originating number is xxxxx. It's fully expected and might even be "required".

Fletch911 12y ago
While you may send what ever calling ID you wish for regular calls, the local LEC treats 911 calls very differently and typically puts them through 911 screening tables that only allow the CLID owned by the account to pass. If another number is there, it can be stripped out and replaced with the billing number. Entirely up to the carrier. Regular Calling Line ID to your cell phone may be totally different that Calling Line ID (ANI) to the PSAP 911 center.
- quesera 12y ago
  Right, CLID and ANI are definitely not the same. I'm sure there's some variation based on the switch manufacturer or software version at the CO, but it is definitely possible to confuse E911 services by misconfiguring your PBX. IIRC, without configuration (if your PBX sends no data) the network tags the call with 000-000-0000, which might trigger some kind of subscriber table lookup. But it's also possible to send different ANI based on your originating extension. I had different ANI configured for my and a few others' home VOIP phones (connected by T1s to the PBX in the office, itself connected to the PSTN by a PRI into the router), so that a 911 call from our houses wouldn't summon an emergency response to the office in the Financial District.

by quesera 12y ago

Fletch911 12y ago

While you may send what ever calling ID you wish for regular calls, the local LEC treats 911 calls very differently and typically puts them through 911 screening tables that only allow the CLID owned by the account to pass. If another number is there, it can be stripped out and replaced with the billing number. Entirely up to the carrier. Regular Calling Line ID to your cell phone may be totally different that Calling Line ID (ANI) to the PSAP 911 center.

quesera 12y ago
Right, CLID and ANI are definitely not the same. I'm sure there's some variation based on the switch manufacturer or software version at the CO, but it is definitely possible to confuse E911 services by misconfiguring your PBX. IIRC, without configuration (if your PBX sends no data) the network tags the call with 000-000-0000, which might trigger some kind of subscriber table lookup. But it's also possible to send different ANI based on your originating extension. I had different ANI configured for my and a few others' home VOIP phones (connected by T1s to the PBX in the office, itself connected to the PSTN by a PRI into the router), so that a 911 call from our houses wouldn't summon an emergency response to the office in the Financial District.