2 ms·
memristors, like core memory, are destructively read. You measure the current to set them to 1 capturing the ones where you needed more current (they were zero
by ChuckMcM 12y ago
memristors, like core memory, are destructively read. You measure the current to set them to 1 capturing the ones where you needed more current (they were zero initially) and the ones that needed less current (they were one initially). You capture the state in a register, and in the second half of the cycle you write the zeros back where the register shows the were originally zero.
As core memory before it showed, you can do this with sufficient accuracy if the hysteresis difference is large enough. The only requirement is that it take a different amount of current to set it to a known state if it was already in that state, than it does to set it to the same known state when it was in the opposite state.
- danmaz74 12y agomemristors, like core memory, are destructively read but are they really, with HP implementation - which is not a "real" memristor? In the video presentation [1] they show that they change the state of the memristor using very short "high" voltage impulses, and then measure its resistance using lower voltages that do not make the oxygen vacancies migrate - and thus do not change the state, if I understood that correctly. If they can use these low voltages (and low currents) to effectively read the state without altering it, they get incredibly simplified management of the memory, and incredibly low power read operations, which would justify their assertion that their memristors can be packed in 3d without thermal problems. [1] https://www.youtube.com/watch?v=bKGhvKyjgLY https://www.youtube.com/watch?v=bKGhvKyjgLY